With patience, proper test equipment, wiring diagrams, knowledge of the system, and patience you can figure out any problem. I believe in finding the problem not throwing parts at it until parts go away. Thanks for watching!
Good video. Hey i have a custom dynamics run stop turn modual and had my turn signal wires disconected. I started my bike and the wires touched eact other now my turn signals dont work. Do you think i blew the modual?
Hello great video. My rear led turn signals wont turn on at all, but when i put the original light bulbs they do work. I have the same set up connection that you showed on the video and still the leds wont work. any advice plese ? thanks
I installed custom dynamics LED turn signals on my 2016 streetglide about 2months ago as a winter upgrade. They worked when I installed them but I just installed the LED tribar tail light and now the right side turn signal is not just working just as in your video. Is this load equalizer something that is needed? Thx for the help.
I have a 2007 street glide also and after I installed my already built Paul Yaffe 12” bars from hill country custom cycles my left turn signal wouldn’t work AT ALL and now it’ll works “most the time” but I have to press is really hard but it won’t self cancel. I have no issues with the right side signal whatsoever… any ideas? Btw. The both worked just fine before the bars were swapped
My hazards aren't working but my turn signals both are. It sounds like you're from PA. If so do you have a shop or a shop you'd recommend near ohio by 80 or 76? It's cost me a fair amount learning on my 2001 roadking and I don't mind if I can learn but the electric for the rear had been "redone" and the left switch somehow controls the rear lights. It's a little bit much to explain on here but any help would be greatly appreciated. Thanks for sharing your video I look forward to watching more 👍
I have the custom dynamics probeam LEDS front and rear. My left side blinker works, but the run and brake light function of the blinker doesn't. I have the CD load equalizer on mine as well. I wonder if the loaded equalizer is messed up? Any ideas or suggestions would be greatly appreciated
I have a 1999 electra glide standard FLHT and I installed the cvo style stretched fender with the cvo led taillights and turn signals. My issue is with the ignition off the rear leds are still on but super dim, is this normal with leds? I ordered a load equalizer from custom dynamics because only the Hazzards flashed and not the turn signals so I'm hoping this will solve my other problem? Any help would be greatly appreciated!
Hello,my name robert from indonesia,i have same problem like that, but if i put on with standard bulb in rear turn signal can be light on,if i replace with led it can't be light on,so what your suggest with that? Any kind error with wire or else,btw my bike is sportster 1200xlc 2007,thanks
I have a question. I have an 08 Dyna Street Bob. I bought a set of leds for the front and rear turn signals. They worked fine on the front and on the right side. However it would not work on the left side. The bulb works just fine, both leds for the back work fine because I put them both on the right side and they both worked. The only thing I can get to work for the left rear is the bulb. Thinking it has to be a socket issue, but not sure what to look for since the bulb works. I also bought a Custom Dynamics load stabilizer and installed it and it is set on normal load. I tried the heavy, but it didn't seem to make a difference. Any ideas?
Question.... I upgraded my stock front and rear turn signal lights to led and installed a badlands load equalizer for a flashing issue. That fixed that issue. Now my right rear signal isnt working. The orginal bulb works in it, and you test the led light its self I plugged it into the left side and it works fine.... but none of the LEDs will work in the right side signal 🤦♀️ what could be the issue if the led is in working order and the orginal bulb works just fine in that side
I would start by removing the Badlands piece and connecting the wiring back as it came from the factory. If the LEDS work properly then the Badlands module is most likely bad.
Everyone has their own go to part for everything on these bike and that is part of the fun. This was not a plug for Custom Dynamics but more of a how to diagnosis a bad module. Thank you for watching and the comment. It means the world to us.
12 volt step by step troubleshooting, a dying art of non assumption, love it!
With patience, proper test equipment, wiring diagrams, knowledge of the system, and patience you can figure out any problem. I believe in finding the problem not throwing parts at it until parts go away. Thanks for watching!
Great job
Thanks for making that video, just ordered that module 👌👌👌
THANK-YOU.. Your Video Helped Greatly ..Same Problem Fixed Great Videos Thanks😃
Good video. Hey i have a custom dynamics run stop turn modual and had my turn signal wires disconected. I started my bike and the wires touched eact other now my turn signals dont work. Do you think i blew the modual?
Very good, good to know! Thank you.
You made a real song and dance out of that - that’s the first thing you have tested - Dah!!!!!!!!
Hello great video. My rear led turn signals wont turn on at all, but when i put the original light bulbs they do work. I have the same set up connection that you showed on the video and still the leds wont work. any advice plese ? thanks
I installed custom dynamics LED turn signals on my 2016 streetglide about 2months ago as a winter upgrade. They worked when I installed them but I just installed the LED tribar tail light and now the right side turn signal is not just working just as in your video. Is this load equalizer something that is needed? Thx for the help.
I have a 2007 street glide also and after I installed my already built Paul Yaffe 12” bars from hill country custom cycles my left turn signal wouldn’t work AT ALL and now it’ll works “most the time” but I have to press is really hard but it won’t self cancel. I have no issues with the right side signal whatsoever… any ideas? Btw. The both worked just fine before the bars were swapped
My hazards aren't working but my turn signals both are. It sounds like you're from PA. If so do you have a shop or a shop you'd recommend near ohio by 80 or 76? It's cost me a fair amount learning on my 2001 roadking and I don't mind if I can learn but the electric for the rear had been "redone" and the left switch somehow controls the rear lights. It's a little bit much to explain on here but any help would be greatly appreciated. Thanks for sharing your video I look forward to watching more 👍
I have the custom dynamics probeam LEDS front and rear. My left side blinker works, but the run and brake light function of the blinker doesn't. I have the CD load equalizer on mine as well. I wonder if the loaded equalizer is messed up? Any ideas or suggestions would be greatly appreciated
I have a 1999 electra glide standard FLHT and I installed the cvo style stretched fender with the cvo led taillights and turn signals. My issue is with the ignition off the rear leds are still on but super dim, is this normal with leds? I ordered a load equalizer from custom dynamics because only the Hazzards flashed and not the turn signals so I'm hoping this will solve my other problem?
Any help would be greatly appreciated!
Hello,my name robert from indonesia,i have same problem like that, but if i put on with standard bulb in rear turn signal can be light on,if i replace with led it can't be light on,so what your suggest with that? Any kind error with wire or else,btw my bike is sportster 1200xlc 2007,thanks
Great video. Very informative. Great job.
My 09 road king rear right light does not work but the blinker does already replaced the bulb and no change...any ideas?
what would cause the front turn signals work when turned on but when I start the bike they do not?
How to fix fog light's on 2019 heritage classic
I have a question. I have an 08 Dyna Street Bob. I bought a set of leds for the front and rear turn signals. They worked fine on the front and on the right side. However it would not work on the left side. The bulb works just fine, both leds for the back work fine because I put them both on the right side and they both worked. The only thing I can get to work for the left rear is the bulb. Thinking it has to be a socket issue, but not sure what to look for since the bulb works. I also bought a Custom Dynamics load stabilizer and installed it and it is set on normal load. I tried the heavy, but it didn't seem to make a difference. Any ideas?
Question.... I upgraded my stock front and rear turn signal lights to led and installed a badlands load equalizer for a flashing issue. That fixed that issue. Now my right rear signal isnt working. The orginal bulb works in it, and you test the led light its self I plugged it into the left side and it works fine.... but none of the LEDs will work in the right side signal 🤦♀️ what could be the issue if the led is in working order and the orginal bulb works just fine in that side
I would start by removing the Badlands piece and connecting the wiring back as it came from the factory. If the LEDS work properly then the Badlands module is most likely bad.
Where are you pulling those schems from brother?
I have a turn signal. I don't have the solid light. What could it be
same here - tell me the fix
I have the same problem, only the signals work but no running lights or brake light, anyone know a fix?
I fixed mine by resetting a fault code. Look up how to read and reset codes. It was very easy.
Thanks for the advice, unfortunately it didn't work but I now know how to check my bike for error codes
Ok , did you trace good power back to the TSM? If so, it’s most likely your TSM.
Need videos for 03 to 09 vrods
Cheaper by far to use HD module. Never had any luck with Custom Dynamics led's, sure wouldn't try their modules.
Everyone has their own go to part for everything on these bike and that is part of the fun. This was not a plug for Custom Dynamics but more of a how to diagnosis a bad module. Thank you for watching and the comment. It means the world to us.
Good diagnostics.
Having this issue with my breakout. Super annoying