This is well detail..thank u boss. Pls ma what if in a situation I did not measure d person pit to pit but I measure d round shoulder how do I get to subtract to get my off should width ? And can I use thesame dart intake for bust 44? 🙏
thank you so much for this tutorial. most of my clients and busty. so I will practice this and see how it goes. Question? pls how you do draft n cut the back draft esp with the difference btwn front half length and back half length? can u detailly describe how I can cut the back? Also can I use this draft video u shared to draft and cut out a mono strap top yoke for a gown of a busty person? eagerly awaiting jr response. God bless u for sharinf❤
The only difference between the back drafting is, the back is 2 inches shorter than the front, and at the back you don't add under burst measurement, I hope this was helpful
You did a great job ma’am but my concern is the shoulder to waist front and back differences how can it be applied or is it not necessary, your response will be appreciated ma’am.
Hello 🥰 thank you! You should only worry about that if you are working on a dress that has half length joining and in that case, you will come up by 1 inch at the waist line of the center back (shoulder to waist measurement) before joining. But in this case it’s not necessary I hope you understand 😊
Please ma, kindly do a video on overbust and underbust tightening. And explain the difference and their effects. I reall need it. Thanks alot once more
I was able to make a blouse for myself using your pattern and it came out pretty well. But assuming I'm to attach as a half length to make a peplum or gown, should I still take the same dart leg? Like 1.5 on both sides underbust,? Thank you so much
Hello.. you can watch the sewing part here How to cut and sew OFF SHOULDER BUSTIER / how to cut off shoulder band sleeve ua-cam.com/video/HuFvr5CURrY/v-deo.html
I think it would be easier if you go through the basics of pattern drafting first. 🙂 Her tutorials are good and not confusing in any way. You just need to use your measurements
Watch the sewing part of this tutorial here
ua-cam.com/video/HuFvr5CURrY/v-deo.html
Thanks ❤your calmness when illustrating
Thank you so much 🥰🥰
Thank you for greatful work done
This is well detail..thank u boss. Pls ma what if in a situation I did not measure d person pit to pit but I measure d round shoulder how do I get to subtract to get my off should width ? And can I use thesame dart intake for bust 44? 🙏
What if your pit to pit measurement does not exceed over to the formal armhole line what should be done
Tnks ma I love the illustration but I will like to ask, on what inches can one add the burst pad before sewing on it
Thanks for this video, U really help us every day
You’re welcome 🥰🥰🥰❤️
thank you so much for this tutorial. most of my clients and busty. so I will practice this and see how it goes. Question? pls how you do draft n cut the back draft esp with the difference btwn front half length and back half length? can u detailly describe how I can cut the back? Also can I use this draft video u shared to draft and cut out a mono strap top yoke for a gown of a busty person? eagerly awaiting jr response. God bless u for sharinf❤
The only difference between the back drafting is, the back is 2 inches shorter than the front, and at the back you don't add under burst measurement,
I hope this was helpful
Pls is there a formula to get the pit to pit and round shoulder measurement? In case the person we are sewing for is not around
I don’t understand the pit to pit part
your bra to bra strap
So beautiful and detailed. I will rewatch and sew with. Thanks alot
Thank you so much 🥰🥰❤️
Thank you so much ❤
You’re welcome 🥰🥰❤️
Thanks for the video, it's helpful
Plssss what size of burst are u working with?
I’m working with bust 42 inches
Thanks for the video
You’re welcome 🥰🥰
Thanks for sharing the video
You’re welcome 🥰❤️
Good work ma'am, can l used this method to cut off shoulder Gown ma'am.Thanks
Yes, definitely 👍🏻
Thank you I need more videos
More to come! 🥰
You did a great job ma’am but my concern is the shoulder to waist front and back differences how can it be applied or is it not necessary, your response will be appreciated ma’am.
Hello 🥰 thank you!
You should only worry about that if you are working on a dress that has half length joining and in that case, you will come up by 1 inch at the waist line of the center back (shoulder to waist measurement) before joining. But in this case it’s not necessary
I hope you understand 😊
Please ma, kindly do a video on overbust and underbust tightening. And explain the difference and their effects. I reall need it. Thanks alot once more
Ok i will 🥰😊
Beautiful
Thank you 🥰
Well explained.. thanks
You are welcome 🥰🥰
Hello pretty woman, I want to know if I can apply burst dart to the front part? Because my front half length is 18" and back half length is 15".
Hii 🥰🥰..Yes sure 👍🏻
Yes ma’am how will she now remove the bust dart 🙏
I was able to make a blouse for myself using your pattern and it came out pretty well.
But assuming I'm to attach as a half length to make a peplum or gown, should I still take the same dart leg? Like 1.5 on both sides underbust,? Thank you so much
Hello 🥰 i’m so glad it came out nice 🥰❤️
Yes take the same 1.5 inches dart on both sides of the underbust
Thanks for
Thank u for the video ma, when you say big size, what do you mean
You’re welcome 🥰 Anything from size 12 upwards
Correct one sissy ❤️🙏
Thank you so much 🥰
I still need to watch how you cut it in your fabric and how you cut the sleeve too
Hello.. you can watch the sewing part here
How to cut and sew OFF SHOULDER BUSTIER / how to cut off shoulder band sleeve
ua-cam.com/video/HuFvr5CURrY/v-deo.html
Thank you ma ❤
You’re welcome 🥰
Please the continuetion of the video
It nice but please kindly take your time for us, please, really learning alot
Aww sorry if the video was too fast but thanks for watching 🥰🥰
@@SewwithMediva ok thank you
I used to have trouble keeping up with tutorials, then someone told me about slowing the playback down, it makes it so much easier 🙂🙂
thanks
You're welcome! ☺️
Thanks boss
You’re welcome 🥰🥰🥰
Good ❤
Thanks 🥰❤️
Please is this the process you go through when cutting a corset
U makes sewing simple by d way u teaches
Thank you so much 🥰
Thanks....but you r too fast when it comes to the pit to pit😢
So Sorry 🥹 i have worked on that in my recent videos
Hi
Hello 👋
I have questions but I see that she doesn't answer questions
Please ask o 😂
I want to follow you is me Erica adarkwa
I don't like ur teaching bcos u are calling ur numbers of ur measurements it's so confusing
Aww sorry. You can always replace my measurements with your own
Simple. how can you know their measuments😂@@SewwithMediva
If you don't like me I like it. Pls keep it up mediva
I love her teaching . She is a great teacher.
I think it would be easier if you go through the basics of pattern drafting first. 🙂 Her tutorials are good and not confusing in any way. You just need to use your measurements
Please I don't understand you my dear Mom
Ok what part do you need help with
Tnks ma I love the illustration but I will like to ask, on what inches can one add the burst pad before sewing on it
Beautiful
Thank you! 🥰