3 LEVELS of Cabinets -DIY to PRO Build
Вставка
- Опубліковано 25 сер 2024
- We're back with another 3 Levels of Cabinets, where we build DIY to PRO Level cabinets. We show off a ton of different techniques and tips that help us make 3 awesome projects. This Video is packed with awesome goodness for the cabinet maker!
SPONSORED BY PIT BOSS: bit.ly/30Q9AeB
Check out Pit Boss's New line up of Pellet & Combo Grills!
PLANS AVAILABLE
JORDAN: DIY CABINET - bit.ly/Cabinet_DIY
SAM: INTERMEDIATE CABINET - bit.ly/Cabinet_...
JOHN: PRO CABINET - bit.ly/Cabinet_PRO
BUNDLE SAVE $7.50 - bit.ly/Cabinet_...
If you like this video you're going to love these.
-3 LEVELS of Cutting Boards - Beginner to PRO Build - • 3 LEVELS of Cutting Bo...
- 3 LEVELS of Sawhorses: DIY to PRO Build - • 3 LEVELS of Sawhorses:...
- 3 LEVELS of Shop Carts - DIY to PRO Build - • 3 LEVELS of Shop Carts...
-3 LEVELS of Bar Stools: DIY to PRO Build - • 3 LEVELS of Bar Stools...
You may also love these:
- 10 Must-Have Tools For Beginner Woodworkers - • 10 Must-Have Tools For...
-5 EPOXY Tips I Wish I Knew As A Beginner! - • 5 EPOXY Tips I Wish I...
- 10 Cutting Boards from Scrap Wood Build - • 10 Cutting Boards from...
MERCHANDISE - shop.johnmalec...
PLANS - www.johnmaleck...
SAFETY GLASSES - geni.us/4h6xaM (Amazon)
Proudly Supported By:
Woodcraft - bit.ly/JM2021_W...
Timberland PRO - bit.ly/JM_Timbe...
BITS & BITS - bit.ly/JM-Bits CODE - MALECKI15 = 15% Off
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMal...
Metalworking Tools - kit.co/JohnMal...
Favorite Finishes - kit.co/JohnMal...
My Camera Gear - kit.co/JohnMal...
#Cabinets #3levelscabinets #HowToCabinets
I really love this series. I obviously can’t do the pro ones. But I can probably pull off the intermediate. And the pro one gives me ideas to change up the intermediate a bit. Please continue doing these.
The pro isnt a far stretch from intermediate, its just a little more involved in the joinery, but once you try iit once you'll feel like its amateur hour and be looking for the next thing!
You definitely can't with that attitude! Patience & Practice, that's it... oh and a lot of tools, and wood.
First, love the progression from shop cabinets to bathroom cabinets to kitchen cabinets. Fantastic.
Second, yes teach Sam and Jordan dovetails cause I would watch that video.
Third, that squirrelly push stick is now my favorite thing.
Glad to see Jordan open up and show his personality a bit more!
I would love to see a three stages of carpenters toolbox video. Every woodworker should make one at some point.
I sometimes realises how Scandinavian I am. My thought was something like "Ah, so you go from sleek and nice to tacky and overworked?"
I have to say, I absolutely *hate* the first cabinet.
Starting a job at a cabinet shop tomorrow, nervous as hell so I'm glad there are resources like this just to familiarize myself with some of the methods since a lot of my experience with these tools is from decking and framing
How is it going!?
That’s so funny I was like I wonder if there’s a new video from John and as soon I I opened UA-cam the notification popped up
Yes! Show them the ways!
When John used finish nails with glue... that is the sign of a pro. A newb thinks everything has to be done on a professional level, a pro knows when to do things on a professional level. When talking about commercial, contracted, commissioned products... that's a key skill to have or you'll never make money.
Love the squirrelly push stick 🐿
"Fix that jank ass shit!"...classic
This is my favourite series on your channel, always fun to see the different approaches.
Love these three way builds !! But I need Jordan’s safety glasses !
All are good looking but SAM is the man
Please let us see you attempting to not kill these two while teaching them to do dovetails.
I own a custom cabinet shop. You'd be surprised how difficult frameless cabinets can get when the clients start adding premium features. Primarily if you are gonna have a perfect 1/8" gal between all doors and drawers. Everything in fine frameless cabinetry has to be dead on square and perfect or it won't work right.
Also, you don't need space balls. You can just put some 23g pins on the back inside the edge of the door. Like each 2" off the vertical center line of the doors. The 4" of spread isn't enough to break the pins, and it won't move from it's alignment.
Yeah...great call. Otherwise the frames will sag to out of square and the doors will start rubbing the door bottom on the face frame and your gaps will get all wanky. Doesn't take long for this to start happening either.
It's like watching a father and two sons. Sam is the oldest who wants to be jut like dad and follow in his footsteps, and bosses the youngest around. Jordan is the youngest who is like, I'd rather be playing video games but were a Woodworking family lol.
Lmao I need that push stick.... love it...
This is my favorite style of video - 3 Level Builds. LOVE the squirrelly Push Stick!! YES, teach the boys then do a 3 Level Video on the "Way of the Dove" haha!
All three cabinets look great. I say yes to teaching your guys to cut dove tails. You made a great lunch for your guys as well. Have a great day.
Congrats on the new addition to the family!
I dig the very squirrely push stick for the table saw
Need to get those get squirrely push sticks on your website immediately
Working on it
Agreed! I'd pay for the SVG file.
Fantastic work boys! Keep it up!
Any way we can get Travel Coffee Mugs in the shop? Wouldn't mind a Squirrelly Squad Yeti style cup!!! Please and thanks!!! Let's get this upvoted to make it happen!!
We have regular mugs, maybe we'll do some for the summer!
Can I get a link to where you got that awesome 7 degree blade from???
I'll be self building my entire kitchen in my home in the next few years. Videos like this are very helpful. I'll be going to get them all to the intermediate level standard at least. Edge banded, skaker doors, frameless full overlay, full pockethole construction. I'd love to be able to do the pro level, but not with my limited tools in a 8ft x 12ft workshop.
Please teach them dove tails and us too!! Such a cool joinery but looks daunting
You got it Matthew!
“And even though I can’t eat them, I can still play with them.” John Malecki 2021
“You jag” I love catching the small Pittsburgh slang😂
I think if you teach Sam and Jordan you should teach us all!
Love the 3 level builds! Really liked John's build.
3:07 is what made me subscribe to this channel
Beginner actually looks best to me
As a minimalist, I super love the Beginners's design.
Congratulations are in order! Enjoy Annie Elizabeth!
Face frame cabinets aren’t my favourite but a solid vid! Y’all should try doing some European modular style some time! I’ve found them easier for longer banks of cabinets.
Love the Nick Offerman portrait.
it is 00.06 in my country, gonna watching your video you just upload 1 hour ago. salam.
Is it just me or did the cabinets go from modern to traditional to ranch house
Right?
Edit: I like them none the less......
More classy more expensive lol
Ok i’m not alone
That's because over the years people got lazy and that's why the "modern" look is the easiest to make.
@@christophermcnaughton6113 it's not a matter of laziness; it's a matter of consumer convenience. People want things "custom" but they also want them cheap and fast.
fantastic 😀👌
2:46 "Should pre-drill this but.... " words we've all regretted :P
Definitely going to build a few of theses
Dang, those tacos look amazing!!
I hope John's beautiful cabinet goes to his new kitchen. Like a coffee station or something. It would be such a waste if it doesn't go anywhere.
This is such a cool series you've got goin on. Looking forward to seeing more
There levels of dovetails!!
As a professional Custom Finish Carpenter I hv to make several different pieces flawless to include cabinets , kitchen and bath!
Islands, hutches, sofa cabinets, tables , crown, base, built ins window trim, build doors , install doors (a lot of them) you get the picture!
I am trying to figure out if I should subscribe ?? To learn dove tails? Why they take to long and my Lee jig will do & has done fine?
For the slap act?
No I think none of what I seen could be something I sell maybe the last one but truthfully I sell my customer on time tested flat panel shaker doors! Or shaker with a chamfer !
Anyway kind of a kidding around channel I get it?
can you put a link out for the table saw blade used for the dovetails?
More 3 levels videos! Great concept for woodworking videos.
I love these series, but I always find it unfair that the pro wood gets to be better wood, with finishing touches that makes it shine. But really useful to know some good tips anyway. Keep on the good stuff !
Every now and then there's a glimpse of the PPE you're using. I'd love a video on this. There's almost nothing on this in the YT woodworking world.
Love this series and think it fills that space when people wonder how they can complete a project without all the same tools as the video. One suggestion though would be to structure the video by step in the process and then go through each build. When it’s time to make the drawer, here’s how Jordan, then Sam, then John make the drawer. Rather than each persons build all the way through. I mention this just because by the end of John’s build, the connection between how he just stepped it up a notch from what Jordan did is a little lost. John’s is obviously more advanced visually, but the impact of why gets muddled a little I think.
Dude, like you, I like to transfer zero knowledge and show off my tools. Awesome job of teaching no one anything.
Lol. “It’s gonna kill me”. I really enjoy this channel.
I 100% think you should make the squirrel and put it on your website.
You guys should do 3 levels of pocket doors.
Seriously f!÷* whoever dislikes this video. These guys do not have to do this. They are fun and entertaining to watch. I rarely learn anything from this channel and still love watching these guys make great videos!
Love the 3 level series. Thanks guys keep it up!
I’m actually going to use this video to try a build in the next couple of days! Best videos I’ve found! Thanks for the share! Very entertaining
II dunno, the intermediate (full overlay) looks the best out of these 3. While I do prefer inset doors and drawers, I’m not a fan of raised panels as they can often date the furniture. Just my opinion. As usual, awesome video though!
Pretty fantastic work, guys! Really nice! 😃
Stay safe there with your families! 🖖😊
Back in November, during the cart build, Jordan said that he had been building for 2 years. Now 5 months later and he says that he has been building for about a year! lol
John my friend I need that squierly push block!
Awesome video from start to finish - all three variations turned out great! I always enjoy the "3 Levels" videos. Keep it up!
YINS, John? Lol -- don't even need to look you up to know you must be a PA boy. Nice high-energy video!
Great video. I wish you guys would be more in depth for those of us who are new to cabinet builds.
With Summer coming up, you should do a "3 levels" for yard games. Maybe cornhole or ladder ball.
sound track list would be nice.
Simplicy leaves you with zero space for hiding small imperfections (let’s not call them errors), so you need to be absolutely spot on...
I like how they clamp the 2 side together and cut the toe kick at the same time
I like how Jordan even used the squeeze clamp as a beginner would.
Teach Sam & Jordan how to make dovetails!👏👏
i love jordan
Best woodworking chanel on UA-cam!
Thank you Michael!
FEED THE BEAST!!
You should sell those Squirrelly push sticks, I for sure would want one!
Oh they’re coming
Great work guys 🇧🇸🇧🇸🎖
Teach'em and that last one is nicer than the ones in your kitchen.
Would love to see a grill station build for a kamado grill done on this series! The bells and whistle buildings would really set the levels apart!
You should do a work bench build next
Teach Sam dovetails. Tell Jordan future employment hinges on him figuring it out.
Yes dovetail class
Spread the Dove Love
God damn, I liked Sam's the best till I saw John's finished piece. That is a legit piece of furniture. That being said, I'd probably build Jordan's, cause that's my level. Awesome video as always!
I would like to know how long you spend building each type on these 3-level series.
Jordan , 4 hours, Sam 8 Hours, PRO , 16 hours
I think those wooden clamps are called wood handscrew clamps. Jorgensen is a brand.
Awesome Squirrel Push stick, why is not in your shop
I wish people still dadoed the carcass into the face frame, its the easiest and most traditional way to make them imo.
I think it's a good idea for all woodworkers to be educated in the ways of the Dove!! Even if you don't use Dovetails in your normal woodworking there's a LOT of transferable skills in hand cut dovetails and they will help your other woodwork projects get to a much higher finish quality. It's one of those irritating things that has taken me 30 years to discover so if you're reading this, don't do the same as me...... learn now LOL. 👍
Am I the only one who recognized the Bernie Sanders meme? :D Love it
I actually like the look of frameless cabinets, provided they are done right. Yes teach them dovetails..
Nobody:
Sam: Jordan, I went to art school
5:32 Jordan says something like "Maybe you should hand draw your cabinets."
Sams is best design
I do love sams!
Great video! On the pro version I noticed you attached the face to the carcass with a central biscuit slot. Wood love to see that process of layout.
Does John know his fly is open when he’s explaining what he’s doing at the router table the second time? JOHN YOURE LETTING ALL THE BARN ANIMALS OUT 😂
''Make sure you are confident in your tool'' Yeah. The cutter getting out of the router table while running, It happened to me once. Scary and Funny you could say. The cutter spining like 12000 rpm but moving very slowly in the air. like a flying spinning top. I used my working piece as a shield. But luckily it didn't fly toward me.
Sam won this one.
Simple but could be fun 3 ways challenge. Bird houses!
Downloaded the pro plans for a bathroom vanity.