Yep and the insulation tape keeping those non condensables out will ensure the compressor will be fine as well as running it with no refrigerant or evap just to top it off, if it cools at all I'd be surprised if it lasts 6 months
Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) ua-cam.com/users/postUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.
You replaced the radiator because the old one was badly damaged and the remaining paper marks that were removed from the new one are still attached to it. But its a nice job well done
its because of some leak are in center, that cannot be repair, some mechanic are able to repair it but it damaged those fins and it affect the cooling performance, and not easy jobs take time, i thinks thats why they just find another radiator 2nd used
thats because it is staged, buy a new AC shoot the last part before and then destroy it. Can you see how clean the pcb is for a such a destroyed looking AC ! The cooling coil in the begining is not blue coated then it suddenly become blue coated. There were so many places where bubbles are coming out but he fixes only on bend
"Hard to believe" is dead right! Not the same parts. Old parts were replaced with new ones at several points, while still pretending to be the old ones.
Esque el metal al estar en tan mal estado como consigue que quede perfecto sin impuerzas ni bultos ni cosas raras del oxido queda como si fuera nuevo no me cuadra nada. Saludos
❤❤❤😊😊😊🎉🎉🎉 . THANK. YOU FOR TEACHING ME. I HAVE LEARNED ALOT FROM THIS. YES I USE TO LIVE IN SEATTLE AND DIDNT LEARN MUCH FROM MYFATHER AND NOW LIVE IN EASTERN WASHINGTON, AND HAVE HISPANIC NEWPHEWS AND SAMETHING TEACHING METHINGS. AS MY NEPHEWS SAY IF MAKE A MISTAKE,OOP😮 TEAR IT APART REDO. NOW I AM NOT AFRAID. YES MY FATHER HAD MONEY BUT NICE TO LEARN. THE SAYING---!! NEVER TO OLD TO LEARN THINGS... MUCHO GRACIAS SENOR🎉🏁🏁🏁🥇🥇🥇🥇😍😍😍😊😊😊😅😅😅
@@stels7776 Еще и пепла какого-то насыпано внутрь с листьями. Ну они уж точно туда не могли попасть сами. Или у них кондиционер снятый под открытым небом лежал?
الرجل ماهر ومتمكن ما شاءالله،لكن بعض البشر يمدك بطاقته السلبية ثم ينصرف، هم نفسهم الذين يتكلمون عن نظرية المؤامرة، استهجن التعليقات السلبية هنا اذا لم يعجبك الفيديو باستطاعتك الانصراف، دع غيرك يتعلم، مودتي لمن مر بسلام 🎉❤ 🎉 ❤ 🙏
I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! Thanks for watching and supporting me. Thanks a lot!!!
I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! Thanks for watching and supporting me. Thanks a lot!!!
my God there's sooo much dirt!How can an air conditioner can get this dirty?And I got my answer from the video itself because it was outside but I don't care.Great video man!!
Парнишка воздуха поддал знатно, не продув фреоном шланги, и окалины добавил паяя без азота. Сам компрессоор зачем выпаивал? -Выдернул бы потроха без разборки контура, и раз уж опрессовал в ванне испаритель-конденсатор нужно было так же прессовать и искать пузыри. Сама опрессовка на низком давлении проведена, 20-25 бар-мало, есть утечки которые до 35 бар молчат, а 40-42 пузыри пускают. Если прессовал не азотом, а воздухом, о чём косвенно подтверждает надпись на баллоне-добавил влаги в масло, хотя кому я это объясняю... Оба стартовых электоролита под замену-по сроку службы. А в целом зачет-если время некуда девать).
See more products we have fully restored 👉 ua-cam.com/video/6gCj5gzz2rg/v-deo.html 👈
Fgr
Fixing gas leakage from the evaporator coil makes the entire evaporator coil looks like a new one. Man, that is amazing 👍.
yeah :D i bet also he ruins theese things :D
Yep and the insulation tape keeping those non condensables out will ensure the compressor will be fine as well as running it with no refrigerant or evap just to top it off, if it cools at all I'd be surprised if it lasts 6 months
Think i was crazy had to watch over the first part to see what colorit was
Lo reemplazo tenia óxido y u a reparación ya echa el que le puso esta impecable
@@leonardoezequieljacob5425 35:05 35:05 🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗😬😬😬🤗😬😬😬😬🤗😬🤗🤗🤗🤗🤗🤗🤗
Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) ua-cam.com/users/postUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.
you are the best , thanks
Nice and clear and cool.
nice video congratulations
Bravissimo 💯
good work, thanks
Good work need this kind of skiils
Awesome and outstanding 🎉
Excellent work،Love to you saeed Ahmed from lahore Pakistan
Very nice 👍
So clean❤❤❤❤😊😊😊
Good job my friend
+1 From Turkey.Nice video.
Even if I have the skill and knowledge, I still can’t do his job. I just don’t have the patience. Anyway he did a fantastic job on restoring it.
Phục hồi funiki thì 100% anh em quê mình rồi. Video quá hay ạ.
LẠI CHẢ
Excellent job!
Nice Work 😮😮
Great work😀
Мастер класс тебе я из Узбекистана. Отлично.молочина ты профессиональный мастер. Уважаю
Nice one I went to learn some to make my work
Ohhh awesome restoration....
Good job 🤩👍🏼
100/100
Good job
You replaced the radiator because the old one was badly damaged and the remaining paper marks that were removed from the new one are still attached to it. But its a nice job well done
its because of some leak are in center, that cannot be repair, some mechanic are able to repair it but it damaged those fins and it affect the cooling performance, and not easy jobs take time, i thinks thats why they just find another radiator 2nd used
Nuevo ustedes
good job from #ttesaiconditione
😊😊 very good 👍 👌 👏
Good job bro.
gas refill meter is awesome. absolute precision. King of Restoration
Great job😊, good luck
Rất nguy hiểm cho người ko hiểu vì bên trong điều hoà có khí gas. Dùng đèn khò mà ko xả hết gas sẽ dẫn đến cháy nổ chết người đó.
Nice servicing
Nice brother
👍🏻👌🏻👏🏻 wow perfecto
Yeah… that’s the right way to check A/C board, checking continuity on the same line 😂 @ 10:48. Just show that the meter moves 😁 nice one!
Funny as always. One more ac unit destroyed
Es verdad, media solo la continuidad en una misma pista jajajaja 😂
he's checking the continuity of it. If the needle doesn't move it is not connected or there's something on the connections
Such a great job ❤
Bravo mr et merci pour ce partage
Excellent
Hay a ơi
I enjoyed this video. Hard to believe before and after. Excellent restoration. Thank you very much for sharing. Looking forward to your next project.
Ok
thats because it is staged, buy a new AC shoot the last part before and then destroy it. Can you see how clean the pcb is for a such a destroyed looking AC ! The cooling coil in the begining is not blue coated then it suddenly become blue coated. There were so many places where bubbles are coming out but he fixes only on bend
If you don't like what they are doing leave this chanel. My opinion only.
"Hard to believe" is dead right! Not the same parts. Old parts were replaced with new ones at several points, while still pretending to be the old ones.
Esque el metal al estar en tan mal estado como consigue que quede perfecto sin impuerzas ni bultos ni cosas raras del oxido queda como si fuera nuevo no me cuadra nada.
Saludos
You change the cooling coil,making us fool 🤣🤣🤣🤣🤣
Yes the easy and fast way to fix the evapurator / cooling coil is change with other way
Yes correct he changed. If you change the cooling coil then why didn't you mention. For changing the coil why are you doing the welding
@@cidmatthew4909 AA
❤😮
Good job. You make me surprise .Funiki AC is cheap of Hoa phat corp Viet Nam
Amazing.
So hard to believe!
Hi Good morning Super Service ing Ac super pant ing You are good mackaink ❤
This is a best video ❤
Testing with the multimeter was very useful!
Perfect
Does anyone else notice that every project on this channel starts out smeared with fresh dirt?
... Yup! And all the parts magically rejuvenate along the way.
Good job❤
I'ts very nice air condioner
Funiki company is in bietnam in 1992 then together with hòa phát in 2004
❤❤❤😊😊😊🎉🎉🎉 . THANK. YOU FOR TEACHING ME. I HAVE LEARNED ALOT FROM THIS. YES I USE TO LIVE IN SEATTLE AND DIDNT LEARN MUCH FROM MYFATHER AND NOW LIVE IN EASTERN WASHINGTON, AND HAVE HISPANIC NEWPHEWS AND SAMETHING TEACHING METHINGS. AS MY NEPHEWS SAY IF MAKE A MISTAKE,OOP😮 TEAR IT APART REDO. NOW I AM NOT AFRAID. YES MY FATHER HAD MONEY BUT NICE TO LEARN. THE SAYING---!! NEVER TO OLD TO LEARN THINGS... MUCHO GRACIAS SENOR🎉🏁🏁🏁🥇🥇🥇🥇😍😍😍😊😊😊😅😅😅
Nice bro
как он проверял цепи просто бомба
Nice restoration gudjob I'm aircon tech. Tandang sora quezon city
Чувак походу ты не понимаешь это не реставрация, это имитация реставрации, видел видео было с ремонтом компа видеокарту промывали водой
Restoration? Are you joking? ruining. You shul'd look at this video backwards then you will see true story.
@@Xpdgxkgkhx А чем по вашему промывают платы? Слезами девственниц? Водой с фейри, прополоскать и потом хорошо просушить.
❤
سلمت يداك ❤❤❤❤❤
Very good, my friend! Congratulations! A thousand likes for you from Rio de Janeiro.
I think this brother trashed the air conditioner himself and then cleaned it himself and then repaired it himself.
@@143this Bravo Einstein :))
Hebat anda sudah memiliki peralatan kerja yang lengkap dan pengetahuan yg banyak
Эти специалисты смогут даже фарш обратно провернуть . Сила видеомонтажа и ловкость рук ))))
забыли показать как плату управления под струей воды моют)))
@@vit271 Мыть плату х**ня, а проверка тестором это гениально. Но почти лимон просмотров есть.
@@stels7776 Еще и пепла какого-то насыпано внутрь с листьями. Ну они уж точно туда не могли попасть сами.
Или у них кондиционер снятый под открытым небом лежал?
@@stels7776 да, прозвонка цепи это лучшее, что есть в этом видео...
А как вам покраска радиатора?
Hay quá❤
Молодец
Buen trabajo... Exelente!
Bro you really did a nice job here 👍
THANKIOU
Eso es lo máximo tremendo trabajo eres el mejor así es que se trabaja 🤠
A si un trabajo bárbaro de pintura
Tay nghề quá cao luôn, góp ý là các b làm thêm công đoạn bảo dưỡng thay dầu block nữa chạy cho êm ❤🎉
good job🎉 👍🏼👍🏼
除鏽要用噴砂效果比較好。
Legend says he still using restored analog multimeter😂
They have changed the evaporator coil 😌 although that was the best disition because old one had leakage from the middle.
Yup. Several other parts were faked too. The "final" unit has very little in common with the "original" unit. Good fakery!
Tranquilos tarded prano venga vueltas
Looks like it was from 2021!
Amazing
loved the video that was a very nice job young sir keep at it all the best
Muito entelijente você
Железо или на пескоструй или хотя бы цинкарём надо было обработать... А потом кислотным + эпоксидным грунтом.
I enjoy watching from start to end, i just notice 10.55 its connected thou
Best xà lơ. Dàn coil thay mới mà sửa gì.
Bạn giỏi nghề.
Good job🌹
I get this like this too your the king of fixing things
Suyo Cornudo remedios cáncer boca
الرجل ماهر ومتمكن ما شاءالله،لكن بعض البشر يمدك بطاقته السلبية ثم ينصرف، هم نفسهم الذين يتكلمون عن نظرية المؤامرة، استهجن التعليقات السلبية هنا اذا لم يعجبك الفيديو باستطاعتك الانصراف، دع غيرك يتعلم، مودتي لمن مر بسلام 🎉❤ 🎉 ❤ 🙏
@Mehdi-Kassem احسنت لقد قلت الحقيقة
AIR❤
Sau khi sửa con này có remote ko ? Hay bạn phải đi mua remote ?
Класс мне бы так
GOOD ❤❤❤🎉🎉🎉
Залепушник 👏👏👏
bro i like you video
بروح ابوك شكد تاخذ على هذه شغلك لو بالعراق يطلبون ١٥٠ الف واكثر
형태예요☆ 택배거래만 가능합니다 반값택배 아저씨 아저씨 아저씨 너무 귀여워요 일 오전 서울 중구 프레스센터에서 오늘 늦은 오후에 비가
Nice
I like air conditioning that
I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! Thanks for watching and supporting me. Thanks a lot!!!
يالله اللهم صل على محمد وآل محمد وعجل فرجهم ❤❤❤
This is very important
A big salute for making a restoration video of freking 40min.😂😂
Thanks for the video. It would be great if you put subtitles in the video for the names of parts like compressor, heat exchanger etc.
I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! Thanks for watching and supporting me. Thanks a lot!!!
my God there's sooo much dirt!How can an air conditioner can get this dirty?And I got my answer from the video itself because it was outside but I don't care.Great video man!!
He smears his projects with dirt to make them look worse than they are. Common practice on UA-cam restoration channels.
A financially poor oriental committing fraud with the adverts, 😡 - how many adverts did this video have?
Парнишка воздуха поддал знатно, не продув фреоном шланги, и окалины добавил паяя без азота. Сам компрессоор зачем выпаивал? -Выдернул бы потроха без разборки контура, и раз уж опрессовал в ванне испаритель-конденсатор нужно было так же прессовать и искать пузыри. Сама опрессовка на низком давлении проведена, 20-25 бар-мало, есть утечки которые до 35 бар молчат, а 40-42 пузыри пускают. Если прессовал не азотом, а воздухом, о чём косвенно подтверждает надпись на баллоне-добавил влаги в масло, хотя кому я это объясняю... Оба стартовых электоролита под замену-по сроку службы. А в целом зачет-если время некуда девать).
Нет там "электролитов", обычные фольга/бумага в масле... Ибо электролиты бахают через несколько секунд в переменке.
Merci pour cette vidéo .