ISD1820 Voice/Audio Record and Playback Module Review + Tutorial
Вставка
- Опубліковано 3 гру 2021
- Thank you for watching my video. Please like, share and subscribe my channel.
#RGInnovations
Keywords:
isd1820 voice recording module,
isd1820 voice recording module with on board mic and speaker,
isd1820 arduino,
isd1820 board,
isd1820 circuit diagram,
isd1820 chip,
isd1820 manual,
isd1820 module schematic,
isd1820 power supply,
isd1820 specifications,
isd1820 tutorial,
isd1820 voice module,
isd1820 voice module price,
isd1820 voice recorder
ISD1820 Review
Voice Recorder Module
ISD1820 Tutorial
Audio Playback Module
ISD1820 Voice Playback
DIY Audio Projects
ISD1820 Voice Recording
Audio Module Tutorial
ISD1820 Features
Voice Module Setup
ISD1820 Sound Recording
Digital Audio Projects
ISD1820 Audio Demo
ISD1820 Module Tutorial
Voice Playback with ISD1820
Electronics Audio Module
ISD1820 Voice Playback Demo
ISD1820 Recording Techniques
Audio Module Applications
ISD1820 Sound Playback
ISD1820 Voice Recorder Setup
ISD1820 Audio Circuit
DIY Voice Recorder
ISD1820 Module Overview
ISD1820 Sound Recording Tutorial - Наука та технологія
Thank you so much for useful information
Excellent video, very well explained. thank you.
Thank you
Very well explained!
Thank you
Thank you for the great explanation... would you please tell me what's the maximum distance for the voice be transmitted to the speaker.. because I want to make this as an interphone
Have not tested the distance, but I don't think it will work more than 15-20 feet distance as the output is very low.
well done on this video, i have a ISD1700 chip for a project, can i record to the chip using the ISD1700 record and playback module and use the sound i record to the chip for my project'?
of course you can use.
Wonderfully explained. This is a super nifty chip! I never even knew they existed.
Is there a chip like this with a microSD flash card reader attached, so you can put say an mp3 or wav file on it and have that play that instead when the button is pressed? It would likely sound much better than one recorded off the microphone right.
there are such mp3 modules, I will try to cover in my future video
@@RGInnovations totally interested!! thanks
good sir
Thank you..
'Very thorough and clear explanation. Do you have any thoughts about how to use this device in an automatic playback mode after a specific delay? That is, like an echo box with specific delay time and repeat count. Thanks.
If you want to repeat it after a delay, you can add a simple timer using 555 ic, if you also want to add repeat count, you have to add a microcontroller.
I have shown in a next video, how you can use it with microcontroller..
Very well explained thank you my question to you can we add a motion sensor to it like when we open the door of a car and can we get this powered by a battery what connecter are required please kindly update thank you
Yes we can add a tilt or vibration sensor to it, or a IR sensor can be used.
hey I know this is a little old but if you wanted to connect this to batteries what size would be cheapest and most compact? also how would I set it up if I wanted to make a toy?
3 AA batteries would be good..setup is same..
Sir, I have a question.what type of connector do I need to use for speaker wire and power supply wire?
JST connector is needed. Or you can directly solder wire...
Good explanation. How to make it to store and play 132 seconds record and play back. Will you supply one board with this modification and tested.
It cannot store 132 seconds
Hi sir, could you please kindly suggest me what kind of power supply should i use for this module. i.e 5v 1a or 5v 2a ?
current requirement for this circuit is very low, it will work in 5v 100ma also, so both 1A and 2A are fine, whichever is available with you.
@@RGInnovations thank youn sir i use 5v 2a
Hello brother, i'd like to asi you a question, i wan't to build a looper with this module for a music project, i was wondering if i can bypass the microphone to the speaker, as you did in the video, while repeating an audio sample, the goal is to record a sound, repeat it in a loop and then, moving a switch to play an instrument on the top of it :)
Your idea is not clear to me.. Could you give more detail?
Don't worry brother, i just found out that my idea is nos viable, but i would like to ask you another question: i saw some videos of people connecting potentiometers to this module to control pitch, do you know how can i do that?
I have never heard or seen anything like that, so I checked the datasheet, even there is nothing mentioned about pitch change.
Could you share any link where you have seen?
This was a very helpful video... But Sadly, the one I purchased did not work.... connected 3.0-5.0V DC to it and nothing. Has this happened to anyone else? Considering re-order and hope I get a working one this time.
usually this modules are not bad, i'd suggest you to recheck the wiring once..
If I use batteries for the power supply,how can I connect the battery slot with jumper wire ?
what type of battery are you using?
Would it be able if I want to take the recorded audio and compare it to other audio for if else coding?
No that is not possible
Can we record different voice alerts. At a time. And give output the alert which we required
no, only one sound is possible
@@RGInnovations what we should do if we want to record different voices
Other modules are there for multiple voices, such as Arp33a3
Hithis helps a lot. If I record the PAYE button plays back once. But the PLAYL button does the same. It plays back only once, no matter how long I press the button. What can be wrong here? I made no changes to the module. I feed it with 5V from an Arduin power supply.
Maybe the module is damaged?
It needs to be connected with some batteries to play?
obviously, it needs some power to run.
Okay Question, If you were to hold the “PLAYE” button down before you connect the board to its power source, would it still play the audio ?
You mean to say without the power supply??
@@RGInnovations yes, hold the “PLAYE” button and while holding the “PLAYE” button connect the power (While still holding the “PLAYE” button)…..Does it play the sound?
Yes, it will play.
@@RGInnovations ok thankyou, I’m adding a Sound to my car when I start it up lol thx man
Can we increase recoding time length
yes, we can increase. I have shown in another video..
ua-cam.com/video/VR-XlO3AZPE/v-deo.html
Hi, I need the voice to be repeated automatically without repressing the button, is it possible? If not, what kind of modules can I find this feature?
It is not directly possible on this module, you can use a microcontroller and easily achieve the required result.
Can we change water tank bell voice?
No, that's a CoB ic.
Sir I have question that how can we louder the sound without changing the speaker? Plz tell me
ua-cam.com/video/YyjqqUzlE60/v-deo.html
I have shown in this video, how you can increase the sound by adding an amplifier module.
Can I use this chip to make google assistant
no, this module produces prerecorded sound only
Sir hello
How to connect this module to audio amolifier.
And shall we connect any audio amolifier Or any specific
ua-cam.com/video/YyjqqUzlE60/v-deo.html
all details given in this video
If we increase time 200 sec. Is decrease quality?
Yes, the quality will decrease a lot.
If power turned off does it keep last recording?
Yes
Can u please share video link of connecting it to controller
ua-cam.com/video/WRdK1UXreEA/v-deo.html
shared in this video
Bro your explanation is excellent. How to add multiple songs in 1 audio box, kindly explain.
this module supports only one audio..for multiple audio you have to use a different module, Arp33a3
From where I can procure this Arp33a3?
Please google in your location, I am from India and purchased from an Indian online seller.
Hello sir aap Bengal se ho??
Mein bhi Kolkata se
Mujhe sir record ni karna hai sirf
Ek hi voice multiple time chalana hai
Jab tak mein button press krke rkhu tab tak voice bajta rhe
It is shown in detail in the video
After the voice record, if the power is turned off and on again, will the record play? What is this option? Record will play once after power on
yes, after power restart the music will play, need to keep the PLAYE button pressed
@@RGInnovations thanks 🙂
Welcome
Can someone help me on how to use the P-L function of this board
Please watch the full video,, it's explained.
Sir,will it work with esp32?please help
Yes it will work with any microcontroller
Can we use 12 v on it ?
not at all..if you want to run this on 5v you need to add a 7805 ic to reduce the voltage.
Which type the battery and the wires it needs?
3 AAA would do, any wire you can use.
@@RGInnovations will it work with 55 mAh 3,7 V battery?
Sir can I know best recorder in low price for atleast one min recording
APR33a3 module
How can i record a clear music or mantra in this please reply ❤️❤️❤️
I will show in next video.
@@RGInnovations thank you very much sir
most welcome. Expect the video by tomorrow evening or Monday Morning.
@@RGInnovations 😍
Set Any Music in Calling Bell / Make Mantra Chanting Machine | ISD1820 Module | PAM8403 Amplifier
Link of Video : ua-cam.com/video/VR-XlO3AZPE/v-deo.html
In Todays video I have shown 3 Topics.
1. How to record Clear Audio in ISD1820 Module
2. How to Increase Recording Time in ISD1820
3. How to Make a Chanting machine / Calling Bell with custom Music
I have tried to explain in detail, so the video is little longer.
It wont work with the batteries in it ,it will need soemthing else to make it work?
this module does not have built-in battery. Needs external power to work.
@@RGInnovations thank u i was gonna buy one but didnt know that
hi, i have one question when i turn it off and on, the recorded voice is played once
how can i resolve this problem
check if the PE pin is connected with something..
@@RGInnovations yes i coneect PE pin with arduino data pin to control the isd 1820 with some data . in this case, can't i resolve this problem??
in that case please check the arduino sketch if it is sending a high output in the pin connected to PE at startup.
V can set the device with our bike side stand?
yes can be set, but needs a 5v regulator ic, else it will burn in 12v car battery
@@RGInnovations can u expain? How its conect?
Any relay for that?
How do I change the resistor to 200 for 20 seconds of recording time ?
Please check the next video after this.
ua-cam.com/video/VR-XlO3AZPE/v-deo.html
how to play more than one record on the voice playback
Not possible on this module...use ARP33A3 module for multiple record
Can we loop it?
Yes, it's shown in video
hi can i make this for just one time sound i want to make a welcome sound for my car and only play sound when i start engine also i want can it be a usb powered?
Yes, it can be usb powered. You have to make a one time pulse circuit using 555ic.
Im sorry actually i don't know what is that. i just know how to solder. And understand a little bit of wiring.
Can you make one so i can copy it.
Only play voice once after receiving power through usb and stop.
And when you unplug and plugin again it play sound once and stop.
Ok i will soon try to post.
@@RGInnovations wow thanks 😅
Hello friend, can I input any pre-recorded sound into it?
No
@@RGInnovations Thank you so much for your quick response. Is there any device that can do this?
Yes, there are mp3 modules with sd card.
@@RGInnovations I know all about Micro SD card-based MP3 players. Actually, I want a microcontroller-based recorder.
Thre are modules for microcontroller
I am making cardoboard train so I can intall it in train and attach motor to automatically play
Sorry your question is not clear to me
Sir how can i modify this module so that if i switch on my light there will be a single anouncement
I will try to show in a future video
@@RGInnovations thank you😇😇
Please tell can we buy it offline
Sorry I cannnot say where you can buy at your location. Buying online is easier.
How to export the recording to pendrive?
not possible
क्या isd1820 ic offline milega
Check in shops near you
Record Kiya hua kitti baar chlega
Until you record next time.
How to connect with amplifier
ua-cam.com/video/YyjqqUzlE60/v-deo.html
I have explained in this video
Can we power it using normal batteries?
yes, we can.
@@RGInnovations thanks. One more question. The rated voltage is 3 to 5 V. Will it cause a problem if I use a 9V battery instead?
yes, it will burn. If you use 9v battery, use a regulator like 7805 or AMS1117 5v.
@@RGInnovations i see. Thanks a lot for replying
most welcome
whta is the power supply for this 5v 2ams ?
5v 200ma is enough.
@@RGInnovations tq
wlcm
Can I use 3.7v 150ma???
Yes can be used.
How tp Change the time slot from 10 to 20 sec
ua-cam.com/video/VR-XlO3AZPE/v-deo.html
How to change the playback speed of an ISD1820
not possible
Sir can please make a video on like when we touch the touch sensor it should convert it into voice
Sir can u please make that video within 2 or 3 days please....
I have inspire awards competition in next 5 days
You can use this same circuit with a ttp223 module... Sorry but won't be abe to make a video in 2-3 days
Sir ok at least 10 days plssssz
Please sir 🙏
And thank you sir for your reply
I will try, but cannot commit. Try to build the project with a ttp223 module. If any confusion, mail me at rgstech85@gmail.com
How to delete a failed recording?
not needed to delete, just do a new recording, that will erase the previous one.
@@RGInnovations thanks
Welcome
Where can i buy?
I'm from Philippines
check amazon or any electronics vendor in your location
Can i know if it will work in motorcycle
I want to insert it to my motorcycle so that when i turn on my motorcycle it will talk to me does it work ?
yes, it will work, you need to use an amplifier with it, and keep in mind, this module runs in 5v only