Oratex may be great stuff, but it would be nice if they fact check... I am the proud owner of one of the planes shown in this video. At 7:00 my Rans S-6S with callsign PH-ANR is shown. It is covered with Superflight, and if you look closely just below the windshield you can read "Paintwork: Rijk van de Vis".
Oratex the BetterAircraftFabric will be at Sun&Fun in Florida this year again!!! Paul will be at the SportAir USA Booth. It looks like at our Booth #300 in Oshkosh at EAA Airventure we will be covering a Biplane during the week of the show. In Oshkosh we will be present with at least 6 people, so that everybody can get his questions answered with no big delays.
For anybody going to Oshkosh for EAA Airventure (2019) with any interest in Oratex; - As always, like every year, we will be at booth #300 near the Control Tower. Right beside Hangar A. Right on the main road that passes in front of the tower. We will be covering an airplane there again and so we can teach what to do and what not to do at all; non-stop during the whole week. We will also display several Oratex airplanes at the booth, aside of those that show up in Oshkosh anyway...(like the ones competing at the STOL competition !)
Regarding EAA Oshkosh 2017 Airventure, we have a New location and will no longer be at the two old booth locations of previous years (2012-2016). We will be at booth number 300, a new outdoor display including an finished Oratex6000-covered Cub and a Belite that we are covering during the show. The New Outdoor Location of our booth its on the runway side of Hangar A, very close to where our old booth was within Hangar A ! Also be aware that we now have a public Facebook group called BetterAircraftFabric as well. We are posting much more photos of customer aircraft there then we could ever show on the website. Its also quite interactive as customers are posting there as well. We also have a New Catalog. Best Regards, (Oratex6000) by BetterAircraftFabric
We now also have a BetterAircraftFabric Facebook Group where I showcase airplanes that did not fit on the website...in the sense of easy to Facebook and hard to get stuff on the website. Some customers post there as well. facebookDOTcom/groups/1711231782441032/ Best Regards, Lars
Oratex may be great stuff, but it would be nice if they fact check... I am the proud owner of one of the planes shown in this video. At 7:00 my Rans S-6S with callsign PH-ANR is shown. It is covered with Superflight, and if you look closely just below the windshield you can read "Paintwork: Rijk van de Vis".
Nice to see model aircraft technology being applied to full-size planes.
REALLY??? What do you think the first airplanes were made of. Its the other way around.
@@nuke1959 It's coming back. RC, drone and experimental aircrafts have very resourceful communities and a lot can be learned from them.
Nice clip of applying the fabric!
Oratex the BetterAircraftFabric will be at Sun&Fun in Florida this year again!!! Paul will be at the SportAir USA Booth.
It looks like at our Booth #300 in Oshkosh at EAA Airventure we will be covering a Biplane during the week of the show.
In Oshkosh we will be present with at least 6 people, so that everybody can get his questions answered with no big delays.
For anybody going to Oshkosh for EAA Airventure (2019) with any interest in Oratex;
- As always, like every year, we will be at booth #300 near the Control Tower. Right beside Hangar A. Right on the main road that passes in front of the tower. We will be covering an airplane there again and so we can teach what to do and what not to do at all; non-stop during the whole week. We will also display several Oratex airplanes at the booth, aside of those that show up in Oshkosh anyway...(like the ones competing at the STOL competition !)
Regarding EAA Oshkosh 2017 Airventure, we have a New location and will no longer be at the two old booth locations of previous years (2012-2016).
We will be at booth number 300, a new outdoor display including an finished Oratex6000-covered Cub and a Belite that we are covering during the show. The New Outdoor Location of our booth its on the runway side of Hangar A, very close to where our old booth was within Hangar A !
Also be aware that we now have a public Facebook group called BetterAircraftFabric as well. We are posting much more photos of customer aircraft there then we could ever show on the website. Its also quite interactive as customers are posting there as well.
We also have a New Catalog.
Best Regards, (Oratex6000) by BetterAircraftFabric
This is so much easier then poly fiber
Like covering an RC plane. I used it back in the day instead of monocote.
Nice informative video, great product as it seems. On a different note, be careful Dan, you are gaining weight 😃
You can't install this on a Piper Tri-pacer, can you?
Whats the product called again I didn't quite catch it?
Why not use Line-X as a coating?
weight
Line-X is VERY VERY VERY VERY Heavy in aircraft terms.
We now also have a BetterAircraftFabric Facebook Group where I showcase airplanes that did not fit on the website...in the sense of easy to Facebook and hard to get stuff on the website. Some customers post there as well.
facebookDOTcom/groups/1711231782441032/
Best Regards,
Lars
Great product, way to f.....ing expensive. It’s about three times as expensive as it’s competitors. I am not wading in money.