are your bolt springs guide hardened steel ? if not then spring material tends to lose its elasticity when compressed multiple times. try using hardened steel spring as for your final project.
@@alialsarraf144 Thank you for your comment, the problem was lubrication. I applied it to the bolt carrier and hammer side in consideration of the bolt carrier , but it turned out that the answer was to apply it to the spring. Also the problem was that the unicorn nozzle didn't work properly because it had some interference with the bolt carrier
@@MynisAgh good to know it was fixed. But lubrication it self must not be the only solution. It must function without lubrication. Check if there is clearance in the bolt and the upper receiver. If you need any assistance please do talk to me here.
작동성 잡았습니다
알고보니 구리스 문제였네요.. 볼캐가 옆쪽에 닿이는거 같아 볼캐에 구리스 위주로 발랐는데
알고보니 볼트캐리어는 떠서 움직이기에 뒤쪽 용수철에만 구리스 발라주면 조금더 부드러워지기에
트리거박스 해머에 부딪히는 문제가 덜해집니다.
연발은 유니콘 노즐의 문제 였습니다.
유니콘 노즐이 건모나 순정제품과 달리 위쪽이 끼는 문제가 있었기에
노즐에 작동에러가 생겼던 겁니다.
노즐을 살짝 위로 들고 위아래 반복으로 자연스럽게 갈리게 해주니
일반 mws처럼 정상적으로 리턴하네요
판매자 분이 친절하게 답주셔서 문제를 해결하였습니다.
are your bolt springs guide hardened steel ? if not then spring material tends to lose its elasticity when compressed multiple times. try using hardened steel spring as for your final project.
@@alialsarraf144 Thank you for your comment, the problem was lubrication. I applied it to the bolt carrier and hammer side in consideration of the bolt carrier , but it turned out that the answer was to apply it to the spring. Also the problem was that the unicorn nozzle didn't work properly because it had some interference with the bolt carrier
@@MynisAgh good to know it worked, if you need any mechanical or technical assistance please reach me in this comment section.
@@MynisAgh good to know it was fixed. But lubrication it self must not be the only solution. It must function without lubrication. Check if there is clearance in the bolt and the upper receiver. If you need any assistance please do talk to me here.
ㅗㅜㅑㅗㅜㅑ
@@-hyun764 볼캐가 중간에 계속 걸림 ㅜㅠ