Looking forwards to seeing the crosskart back again, if you have any stability problems with the rear suspension, i would recommend welding a long spar pipe across top to join the two suspension supports (with the three holes) this will compensate for inward pressure and remove some pressure off the frame, as opposed to the two smaller pipes, just a suggestion though, the work you have done is awesome, that's some damn good work man 👌👌👌
really like these videos. :) just one thought, those two pipes conecting the a-arms are really weak, they will bend in the ends(not saying it won't work). they could be replaced with one diagonal tube like this -> |/|
I can see this video is a couple of years old now. I hope you have learnt from your mistakes on the shock pick up, length of shock and rear end geometry and rectified it!
emmanuel cañas hey pal, without writing up an essay I’ll try make it short. In my experience the top shock mounts are way to long and will have to much leverage and snap once under load. (Look up Triangulation in buggy/car builds and how it works) The length of the shocks look to long to me also. For the geometry is the geometric arrangement of the parts of a suspension system and the value of the lengths and angles when all move in cinq, if you build off the top of your head like he has, he will get issues. I’m at all trying to insult what he has done either just my 2 cents from me experiences. 👍
@@SikSwanger I see what you mean now, i did think about the top being to far away from the frame without enough support, as for the long shocks i will take that into consideration, as i am actually building a crosskart and needed some inspiration so i thought i'd watch some videos. Thanks for the advice man.
15-vuotiaana saa ajaa traktorimönkijää, joka ei oo mikään 200cc. Traktorimönkijä saa mennä 40km/h. Uusimman uudistuksen mukaan LT eli liikennetraktori kortilla saa ajaa traktorimönkijää joka kulkee max. 60 km/h, sitä voi myös ajaa C eli rekkakortilla.
Your english is getting better. We have always understood what you say but your pronounciation was soooo finnish. Good job
Best accent ever :) Like that South African rally driver..can't remember the name...
Nice build !
Looking forwards to seeing the crosskart back again, if you have any stability problems with the rear suspension, i would recommend welding a long spar pipe across top to join the two suspension supports (with the three holes) this will compensate for inward pressure and remove some pressure off the frame, as opposed to the two smaller pipes, just a suggestion though, the work you have done is awesome, that's some damn good work man 👌👌👌
yes ten minutes of stunt freaks team 😍😍
tulleeko kesällä taas sft carage vlogeja koska ne on parhaita👍
+Niko Kuusisto tottakai👍 hetiku ajokausi alkaa kunnolla et saa monipuolista ajomatskua:)
You have to build one of the coolest since you have access to real tools and all the materials you need dude so far so good do
lmao how many people have you triggered with your "precision"? So good.
really like these videos. :)
just one thought, those two pipes conecting the a-arms are really weak, they will bend in the ends(not saying it won't work). they could be replaced with one diagonal tube like this -> |/|
I did pipe like that already :)
Pretty cool shop accese to lots of tools!!!love ur videos
Mikä ton musiikin nimi on joka soi tuol taustalla
Is great fun time building shitbox to Ledde Zeppelen.
veri nice
on nähny ton ice car livenä Ruokolahti freeski muute tulaa uusiksi tänätalvena
Simple eplanation.. Hhee.. Love this video
are those the fox float 2 shocks?
tuliko siitä sinisestä kelkasta se uus renggas kelkka ja tuuttako kesäl seinäjoelle miittii?
I can see this video is a couple of years old now.
I hope you have learnt from your mistakes on the shock pick up, length of shock and rear end geometry and rectified it!
Hey, i'm curious about what you said, would you mind to elaborate?
emmanuel cañas hey pal,
without writing up an essay I’ll try make it short.
In my experience the top shock mounts are way to long and will have to much leverage and snap once under load.
(Look up Triangulation in buggy/car builds and how it works)
The length of the shocks look to long to me also.
For the geometry is the geometric arrangement of the parts of a suspension system and the value of the lengths and angles when all move in cinq, if you build off the top of your head like he has, he will get issues.
I’m at all trying to insult what he has done either just my 2 cents from me experiences. 👍
@@SikSwanger I see what you mean now, i did think about the top being to far away from the frame without enough support, as for the long shocks i will take that into consideration, as i am actually building a crosskart and needed some inspiration so i thought i'd watch some videos.
Thanks for the advice man.
emmanuel cañas no worries pal.
get onto www.minibuggy.net heaps of info on there!
@@SikSwanger Will check it out, thanks brother!
Can I like twice!
Ne piirtää kellä on liituu! ja Jos riski on olemassa niin riski otetaan
Koska teilta tulee uusia tarroja??
what diff, rear axel and hubs are u using?
+Christopher Wickman diff is from speedcar, shafts are from bmw and hubs are selfmade
Nice
Don't know what your doing with this but shock towers and Heim joints would be far stronger and far superior performance.
Very Nice car
Miten toi alapää vahvistetaa vai tarviiks sitä vahvistaa hitsien lisäks?
+jonnenne emmä meinaa ku yhen poikki latan laittaa
"I have no idea what I'm doing".
😨nooo......say it ain't so.
Huikee show oli messuilla! Harmi että ne ei ollut tajunnu laittaa yhtää screeniä mihkää ku oli nii paljo jengiä :( mutta silti 5/5
solid broh!
were did you get youre suspension?
I love northern english accents.
the accents is more like Russian
I believe they are from Finland. It's close to Russia but there are clear differences.
ite laittasin vielä vaikka putken tohon säätöpaljoen väliin nii ei välttämättä joustais ja kestäis paremmim🤔
voitteko sft jätkät tehä lisää lintta videoo
How much travel
rälly inglis is vero vahva in this
bartmanapina 😂😂
millon se on valmis
kuuluuko antti pendikainen viä sft?
topias nikki Ei
oliks toi näytöksessä vai häh????.....
#1000like
Haha love the vid man was funny
joo ihan liian hepponen tulee tuosta jousituksen yläpäästä ellet tuo sitä poikittaissuunnassa vielä.
+PHUSII saanähä. Emmä meinaa sitä tukea enempää
How many cc? And hp
so add a drill their
mulla on tommonen sft käppi
SUOMI PERKELE! miullakii on huppari ja käppi
+Oskari Lampinen siistiä!!:)
Stunt Freaks Team mullaki on huppari ja käppi ja mopo on täynnä teidän uber tabea
SUOMI PERKELE! sama
mitkä välitykset tossa on?
+tomi suikkari taitaa olla 14-62
ON
Haluaisin tietää että saako 200cc mönkijän 15vuotiaana kilpiin ku se menee 75-80km/h
Pitääkö pistää rajotin pienemmälle😂😂
kai juu
Ei kilvet liity mitenkään ikään.
15-vuotiaana saa ajaa traktorimönkijää, joka ei oo mikään 200cc. Traktorimönkijä saa mennä 40km/h. Uusimman uudistuksen mukaan LT eli liikennetraktori kortilla saa ajaa traktorimönkijää joka kulkee max. 60 km/h, sitä voi myös ajaa C eli rekkakortilla.
Eyeetu faktat kuntoon C kortti on kuorma-auto kortti. Rekkakortti on jo asia erikseen eli CE
kaunista
Hello sir I’m building an R6 buggy and need a bigger sprocket. Where can I buy one like yours?
Miks sanot melkei koko ajan öö
koitappa ite puhuu virheettömästi ilman taukoja englanniks videolle nii tiiät!
9:10
hyvä kun acdc soi
moi
eka OMG
jaa
kuudes
eka
Topias Niku et ollu eka mä olin kato vaikka XD
Siel lukee 1 näyttökerta
Eka
Eemil Klasila olin eka XD