*** To buy your NordicTrack hardware and also help support this channel at no extra cost to you. Please use these links!: 🇺🇸🇨🇦🇲🇽: bit.ly/NordicTrackUS 🇬🇧🇩🇪🇫🇷🇪🇸: bit.ly/NordicTrackEurope 🇦🇺 : bit.ly/NordicTrackAUS *** All the best. Steve
This video had my daughter and me chuckling each time we replayed it while putting our treadmill together tonight. Loved the humor. thanks for getting us through it!
Watching this since helping a buddy move his 1750 across town. Contemplating dismantling components to easier load into van and re-attach and Point B site.
Excellent video! My Nordic Track will be delivered tomorrow and this will help a lot in assembly. Nordic Track design should have prevented the screen from being installed wrong. This is a Nordic Track error.
We moved and couldn't figure out why the screen wasn't powering up, your video saved the day by showing some of the wires from the monitor slipped out in transit! Couldn't find anything on nordictrack website showing the wires, so thank you for making this video.
Thank you so much. My wife wore her 12 year old pro form out so I purchased the lastest 1750 for the holidays. Thanks for the turned around screen tip. I would do something similar. Have a great Xmas.
Absoloute class video, way easier than following the manual. Even followed the screen mistake, figured it out then continued the video to confirm my mistake 😅. Thanks soo much for making the setup a lot easier, would have taken me a lot longer than with the manual.
Thanks a lot for the informative video brother. A question... do you think it would be worth it to lubricate the underneath the big belt with pure silicon oil or to do it after few months or hours of use ?
New sub here,I'm assembling a 1750 from Nordic track. So I see a little yellow tag on my very first step of assembly,that says scan before connecting. Is that important?,I do have the ifit trial but i dont know about the scan code thing yet. I put it together anyway... Thanks for the video..
Hi Steve, How did you move it into position. I’ve just built mine. I need to spin it round and move it a couple of metres. Just wondering if I need to get some man power in.
Just spoken to Nordic Track and they say it cannot be tilted on delivery due to potential motor damage, but your video shows the delivery team doing this. I have one narrow door (76.5cm) Nordic track say it must be 90cm - but with a tilt it would go through. I'm unsure what to do. Any thoughts?
That’s interesting. My door is the same width and NordicTrack have delivered 4 treadmills through it. I also take them out the same way when I have to bring new ones in. Sorry I can’t tell you more. Perhaps check with them again? 🤷🏽♂️
@@SteveJulien 76.5cm door width? I really would like the longer track than the EXP range. Your videos are fab - best I've seen and very helpful - thank you!
***
To buy your NordicTrack hardware and also help support this channel at no extra cost to you. Please use these links!:
🇺🇸🇨🇦🇲🇽: bit.ly/NordicTrackUS
🇬🇧🇩🇪🇫🇷🇪🇸: bit.ly/NordicTrackEurope
🇦🇺 : bit.ly/NordicTrackAUS
***
All the best.
Steve
This video had my daughter and me chuckling each time we replayed it while putting our treadmill together tonight. Loved the humor. thanks for getting us through it!
Excellent! 😂
Watching this since helping a buddy move his 1750 across town. Contemplating dismantling components to easier load into van and re-attach and Point B site.
Really helped watching this before assembling and during assembly. Much easier to follow than the diagrams in the manual. Thank you.
Glad it helped
Excellent video! My Nordic Track will be delivered tomorrow and this will help a lot in assembly. Nordic Track design should have prevented the screen from being installed wrong. This is a Nordic Track error.
Great video!
We moved and couldn't figure out why the screen wasn't powering up, your video saved the day by showing some of the wires from the monitor slipped out in transit! Couldn't find anything on nordictrack website showing the wires, so thank you for making this video.
Excellent!
Thank you so much. My wife wore her 12 year old pro form out so I purchased the lastest 1750 for the holidays. Thanks for the turned around screen tip. I would do something similar.
Have a great Xmas.
Thank you!
Absoloute class video, way easier than following the manual. Even followed the screen mistake, figured it out then continued the video to confirm my mistake 😅. Thanks soo much for making the setup a lot easier, would have taken me a lot longer than with the manual.
Glad it helped
This video was incredible. So much easier to follow than the instructions that came with it. Thanks so much!
So glad it helped!
Very helpful thank u
Appreciate your assistance it was awesome thanks!
Awesome video, saved me a lot of time and gave me a laugh as well, thank you Steve!!
4:11. This bit right here. Thank you so much.
Hey Steve, thanks for the tip on the covers that fit under the screen. Made exactly the same mistake, putting it on the wrong way around! 🤣
Glad its not just me! haha!
Thank you for the step by step video!!!
You are so welcome!
Great content! Is this going to be the next review?
Thanks! Yes, lots to come with the 1750!
Thanks a lot for the informative video brother.
A question... do you think it would be worth it to lubricate the underneath the big belt with pure silicon oil or to do it after few months or hours of use ?
Glad it helped!
How to Lubricate A NordicTrack Treadmill Belt. (Without wrecking it!)
ua-cam.com/video/u20_urZ2258/v-deo.html
Hey @steveJulien - thanks for the guide great work, just wondering what matt you've gone for under the 1750 - thanks
New sub here,I'm assembling a 1750 from Nordic track. So I see a little yellow tag on my very first step of assembly,that says scan before connecting. Is that important?,I do have the ifit trial but i dont know
about the scan code thing yet. I put it together anyway... Thanks for the video..
Hi Steve,
How did you move it into position. I’ve just built mine. I need to spin it round and move it a couple of metres. Just wondering if I need to get some man power in.
Hi.
With tread base folded up, you should be able to pull it back into its wheels to move.
Was assembly one for a friend the screen seems to be locked will not spin around, what did you have to do do to move the screen?
Just spoken to Nordic Track and they say it cannot be tilted on delivery due to potential motor damage, but your video shows the delivery team doing this. I have one narrow door (76.5cm) Nordic track say it must be 90cm - but with a tilt it would go through. I'm unsure what to do. Any thoughts?
That’s interesting.
My door is the same width and NordicTrack have delivered 4 treadmills through it.
I also take them out the same way when I have to bring new ones in.
Sorry I can’t tell you more.
Perhaps check with them again?
🤷🏽♂️
@@SteveJulien 76.5cm door width? I really would like the longer track than the EXP range. Your videos are fab - best I've seen and very helpful - thank you!
Yes, both the doors the treadmills go through are 76.5cm wide.
Thanks, glad you like them!
How do you turn it off? I don’t want to unplug every time because it takes a while to load ifit.
A recent software update means it can go into standby turning the screen off. 👍🏽
Is it applicable to Commercial 1250?
Yes, will be the same or very similar.
Have you figured out how to disassemble to move it to a different room ?