Hi dear Mr Tevz. Do you know that you have one of the best method for training the led technicians? So your job is always great. So I am very glad to have you.
Very good sir, super job, with knowledge, your blower gun, very good,I liked.after soldering the spot should shine,no dry soldering 😊, your soldering iron is good ,in between clean carbon deposit, sir your work is fine. Use a little more flux in order to cool IC,from300degree temperature, after blowing hot air sir, all the best 😊
Opps, bugger lol, I've worked on a board and blown capacitors off the board, always good to film intensive work to see if everything ok then watch footage in case I fooked it up. nice bleeps you had. Make a perfect tutor to student.
Good day... A very nice technique... Your 220 ohms 20 watt is very handy, as a precautionary safety device that prevents bursting (similar to the sound of a dancing fire cracker or "whatusi") of the other components. Tip: there is also another way to check if the PWM ic is not working. You can check a pulsating voltage at the gate terminal of the mosfet while it is removed from the circuit. Setting the analog tester to DC 50 range. The usual pulsating voltage is less than 1 volt or typically .8 volt. An absence or no pulsating voltage reading is a sign that the PWM ic is defective... Anyway, I enjoy watching your videos that really do help begginers and experts in the field of electronics repair... Ps: An audio beeping sound after that overheating those nearby componnents of the PWM. I didnt heard that "ilocano" word of expression...😅
Dear Mr. Tevz: I really enjoy your videos, they are very educational. Even in your errors and omissions you teach us your work technique. Thanks for sharing. 👍🙏🙋 👏
i use metal tape or high heat resistance tape over components to avoid them to desolder and get lost with heat gun air blowing and also to protect them from heat !
Hello Tevz, I missed you! If it allows it at some point, could you explain how you managed to know in the event of a vertical line on the lcd panel which lines where gate, where driver column should be cut? THANKS
Hi dear Mr Tevz.
Do you know that you have one of the best method for training the led technicians?
So your job is always great.
So I am very glad to have you.
Thanks
Let us upload him
I like the robot voice rather than silence fix. keep em coming. Already subbed
Hello, thank God that we have a good teacher like you. Reza from Iran
❤❤❤
Very good sir, super job, with knowledge, your blower gun, very good,I liked.after soldering the spot should shine,no dry soldering 😊, your soldering iron is good ,in between clean carbon deposit, sir your work is fine. Use a little more flux in order to cool IC,from300degree temperature, after blowing hot air sir, all the best 😊
Good information sir
Without Rooster Crowing I consider your video is incomplete. 🙂 Great Info.
So you need Papaya and Ginger for Tinola old man😅
❤Good work as usual ❤️
gracias. siempre impecable y transparente tus videos
Great video
Nice Video 😊😊
Your the best
Opps, bugger lol, I've worked on a board and blown capacitors off the board, always good to film intensive work to see if everything ok then watch footage in case I fooked it up. nice bleeps you had. Make a perfect tutor to student.
Good day...
A very nice technique...
Your 220 ohms 20 watt is very handy, as a precautionary safety device that prevents bursting (similar to the sound of a dancing fire cracker or "whatusi") of the other components.
Tip: there is also another way to check if the PWM ic is not working. You can check a pulsating voltage at the gate terminal of the mosfet while it is removed from the circuit. Setting the analog tester to DC 50 range. The usual pulsating voltage is less than 1 volt or typically .8 volt.
An absence or no pulsating voltage reading is a sign that the PWM ic is defective...
Anyway, I enjoy watching your videos that really do help begginers and experts in the field of electronics repair...
Ps: An audio beeping sound after that overheating those nearby componnents of the PWM.
I didnt heard that "ilocano" word of expression...😅
hahahaha
sir, i learnt a lot from your video. keep it up. you are angel of knowledge
Dear Mr. Tevz: I really enjoy your videos, they are very educational. Even in your errors and omissions you teach us your work technique. Thanks for sharing. 👍🙏🙋 👏
You are very welcome
i use metal tape or high heat resistance tape over components to avoid them to desolder and get lost with heat gun air blowing and also to protect them from heat !
Thank you friend God bless you always
Merci beaucoup cher ami
Watching Master
Emeğine sağlık ustam. Sağlıklı günler dilerim .
Good job sir thanks
Excellent explanation
The best Mr Tevz
Very nice video.Sir.
Keep watching
lodi..🎉🎉🎉
Very nice video.
Thank you very much!
Thanks sar, that great, good day sar
Ótimo serviço, boa explicação 🙂
Tev I have similar issue on 57inches tv.but mine voltage output at the LED port but doesn't light up. The LED are all good
It's possible that the led driver also has a problem.
Hello Tevz, I missed you! If it allows it at some point, could you explain how you managed to know in the event of a vertical line on the lcd panel which lines where gate, where driver column should be cut? THANKS
Will do
@@tevzTVTevatronics thank you very much my friend
❤❤❤❤🎉🎉🎉🎉🎉❤❤🎉🎉❤❤🎉🎉
Hi tevs !!! you are using the 220 ohm resistor . but how many watts ??? thank you
20 watts
Good job
dump for bn41-1604 emmc
HISENSE 32 TV "LM1EZ" REGULATOR NOT FIND SRILANKA.. PLS SAME IC NUMBER TELLME
INPUT VALTAGE 3.3
Boss whare are from you
I'm from Philippines
Am Indian but now am working Malaysia😊
SIR MODEL NUMBER PLEASE ! MATHERBOARD NUMBER