Using the AXIS Foils ART999 for some months - Frontwing talk

Поділитися
Вставка
  • Опубліковано 1 лют 2025

КОМЕНТАРІ • 19

  • @Twizz1979
    @Twizz1979 2 роки тому +1

    Fantastic review and info! Thank you very much for your video. I think it's one of the most real and informative I've found so far! Thanks again.

    • @WingsurferNL
      @WingsurferNL  2 роки тому

      Thanks, I appreciate your comment a lot!

  • @erikallen5056
    @erikallen5056 Рік тому +1

    Perfect review
    The art 999, short fuze, 375 stab is my daily driver
    I ride from wind chop to overhead and don’t have an issue ( not sure it’s the best in the bigger waves, it gets stiff on the hi speeds which is good but I’m thinking something can turn better in those situations)
    Also I’m on aluminum mast
    I never experienced the drop out you experienced
    I wonder if your mast was flexing casing the issue
    I have had that problem with hi aspect wings on No limits mast
    Nolomtiz is not a stiff mast in my opinion
    Maybe the new ones are better

    • @morF1ni
      @morF1ni Рік тому

      man I just got the art999, short fuse and 350 progressive. But only have a 90cm 19mm mast tha I use for kiting. would you suggest the 16mm 75cm for my all around prone surfing? or 68cm?

  • @morF1ni
    @morF1ni Рік тому

    Great video, thanks! Man I just got the art999, short fuse and 350 progressive. But only have a 90cm 19mm mast tha I use for kiting. would you suggest the 16mm 75cm for my all around prone surfing? or 68cm?

    • @WingsurferNL
      @WingsurferNL  Рік тому +1

      Thanks! I would stick with 19mm for prone foiling. It doesn't need the speed that much. 999 is a large span and will benefit from the extra stiffness. But also will be stronger.
      75 or 68 will both work. Depends on the depth I'd say. If it doesn't matter go for 75. 68 is quite short. 🤙

    • @morF1ni
      @morF1ni Рік тому +1

      Thanks for your time@@WingsurferNL All the best!

  • @michaelkihn8311
    @michaelkihn8311 2 роки тому

    Does that piece you used to change the rear wing angle come with the screw set of axis? 🙋‍♂️🙋‍♂️

  • @r55551
    @r55551 2 роки тому

    Nice review. A quick Q: Do you position the 999 in the same place in the mast track as the HPS1050?
    btw - I bought a HPS1050 partly on the basis of your 1050 review. It's brilliant, so thanks for that 🙂.

    • @WingsurferNL
      @WingsurferNL  2 роки тому

      Happy that it helped! Have fun with it! :)

    • @r55551
      @r55551 2 роки тому

      @@WingsurferNL thanks what about the position of the 999 in the foil box?

    • @WingsurferNL
      @WingsurferNL  2 роки тому +1

      @@r55551 a yes, it's the same.

    • @r55551
      @r55551 2 роки тому

      @@WingsurferNL thanks!

  • @matthiasmucke2348
    @matthiasmucke2348 2 роки тому

    Your review is perfect, helped me a lot.
    What fuselage do you ride with the 999 ? And did you use a negative or positiv shim from axis?
    have a good time.
    Matt

    • @WingsurferNL
      @WingsurferNL  2 роки тому

      Hi Matthias, good to hear! Must say I prefer either ultra short or short. Crazy short is very loose, but find it quite difficult when conditions are getting though. I used the positive one, 1 degrees. But haven't been using it for a while now. Probably got used to the art feeling.

    • @matthiasmucke2348
      @matthiasmucke2348 2 роки тому

      @@WingsurferNL Thanks for your answer. Thats good news. I will try it out with and without shim.
      Looking also forward to the new advance fuselage. Sounds really good the mast going forward 4cm.
      Best regards Matt

    • @WingsurferNL
      @WingsurferNL  2 роки тому

      @@matthiasmucke2348 Getting some Ultra shorts in tomorrow. Finally!

  • @matthiasmucke2348
    @matthiasmucke2348 2 роки тому

    Matt