How to Replace Rear Wheel Bearing & Hub 2001-2005 Honda Civic

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASH...
This video shows you how to install a rear wheel hub and bearing on your 2001-2005 Honda Civic. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2001 Honda Civic
2002 Honda Civic
2003 Honda Civic
2004 Honda Civic
2005 Honda Civic
Tools you will need:
• 19mm Socket 1aau.to/oa/1AXA...
• 32mm Socket 1aau.to/oa/1AAS...
• 1/2 Inch Breaker Bar 1aau.to/oa/1AXA...
• 3/8 Inch Breaker Bar
• Torque Wrench 1aau.to/oa/1AXA...
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• Paper Towels 1aau.to/oa/1AXS...
• Chisel 1aau.to/oa/1AXA...
• Drain Pan 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@Playstation_Sony]

omg I just replaced both front wheel bearings on my Nissan altima. looked up the average time it takes to complete and everyone was like 2 or 3 hours...... well it took me 2 days 10 hours each day, never again!
you can speed through removing the wheel, brake kit, abs sensor within 10 mins but the brake rotors and wheel bearings is where you will spend all day swinging a hammer(didn't have a sledge😅)

[@vice4134]

What kind of grease are you using for the axle spindle???

[@julianreyes6857]

What size are those drum releasing bolts?