Hipot testing. Cable Hipot Test. High Pot test. High potential Test. DC Hipot Test. Hi pot Test.

In this video
Hipot test is explained with respect to the following points,
1. Hipot testing kit
2. Hipot testing explained with example
3. Testing connection for phase to earth and phase to phase cable insulation test
4. HIpot test voltages as per the standards
5. Safety precautions during the tests
6. A Practical demo of the test
For business inquiries mail to: [e-mail]
Video URL: • Hipot testing. Cable H...
#hipot #hipottest #hipottesting #highpottest #highpotentialtest

[@syedimam8261]

Didn't shown leakage current during test
How much leakage current?

[@ElectroGlobe1]

Leakage current was around = 0.5 mAmp

[@syedimam8261]

Thanks

[@pradeepraghavan2109]

Thanks for sharing...very informative topic and well explained

[@ElectroGlobe1]

Thank you for the comment

[@chaudhrymujeebali7565]

its really good information to understand Hipot testing

[@ElectroGlobe1]

Thank you for the comment.

[@karingulasrinivassrinivas4515]

Super 👌 sir your explanation is very good

[@ElectroGlobe1]

Thank you for the comment.

[@tamilchelvanramasamy8733]

Lucid and elegant!!!!!!
Thanks Sir

[@ElectroGlobe1]

Thank you for the comment.

[@user-kh8qd5pw7c]

Sir if you break it down to its components, How does your test transformer can produce up to 60KV of voltage from 230 volts. please explain.

[@ElectroGlobe1]

By using Transformers.

[@motivatednandu]

But when you apply DC voltage to primary of transformer you will get 0 output so how can you apply voltage

[@ElectroGlobe1]

Converters and inverters are used to transform AC into DC and vice a versa. At transformer ends only AC is applied. Transformer does not work on DC current.

[@nerosmero1183]

Thanks for sharing this great experience. One question: How much the Hi-pot test results should differ between old and new cables? Regards

[@ElectroGlobe1]

Thank you for the comment. Either old or new cable, the high pot results such as leakage currents, voltage withstand time, should be as per the standards.

[@nerosmero1183]

@@ElectroGlobe1 what about the test voltage values?

[@ElectroGlobe1]

@@nerosmero1183 In the video reference standards are mentioned for test voltage values.

[@evervasquez2489]

Cuales son las valores maximos de corriente fuga o cual es el standard

[@shaikhsiddiqui8560]

Very good information.

[@ElectroGlobe1]

Thank you for the comment

[@jims9916]

Thanks. In my Hipot Kit for DC, In the diode how much oil should be there. In our case it is 50%. as there is a small hair line crack at the top of diode. is it recommended to test when the oil in diode is only 50%. What oil is used to top up. Thanks

[@ElectroGlobe1]

Thank you for the comment. It is advisable to refer to the manufacturers manual.

[@wolfpackrc]

Good job

[@ElectroGlobe1]

Thank you for the comment.

[@syedaijazmohiuddin5237]

Sir, at end+ 1700 I am not getting please explain

[@ElectroGlobe1]

The Values are as per the standard.

[@chaudhrymujeebali7565]

GREAT MY FRIEND

[@chaudhrymujeebali7565]

You are doing well dear