How to Make a Wooden Bong Pipe
Вставка
- Опубліковано 22 сер 2024
- Hey everyone! My name is Dylan Taylor, and this is my DIY channel! Today I made a wooden bong pipe using a baby food jar, some plastic tube, and a few scraps of wood. The purposes of this video are for education. I do not condone smoking, nor do I smoke.
If you want to see more of me...
Check out my vlog channel!
/ @dylantaylor
Instagram: @dylansdiyworkshop
TheFatRat
Telescope: • TheFatRat - Telescope
-Unity: • TheFatRat - Unity
----
? DOCTOR VOX - Endgame
• Video
/ doctorvox
/ doctorvoxofficial
----
HEY GUYS! I'm Still Making Things! Be sure to subscribe for more, and If you want to look at the custom pipes I have for sale, check out my store here! www.etsy.com/ca/shop/DylansDIYWorkshop?ref=pr_shop_more
Seriously dope
🖓🖓🖓
stop lying! 420 everyday
he doesn't smoke because that thing will not draw for shit.
+commander187 a few of my friends have tried it and have said it works like a dream
If you don't smoke and have a good idea what of makes a good smoking pipe your pipe will be sub standard. Breathability, heat absorption, Size, comfort and finish. all these things make a good smoking pipe.
+commander187 not necessarily a sub standard pipe, I have friends who test and reflect for me, and i keep changing it up until I get one that works very well
You need to add carburation. Like a car the carburetor adds air to the fuel. The air oxidizes and cools. If you have to much heat/smoke You will not get as high no matter how much ice water you have the taste will be bad , you will not be able to clear it, after a few drags ( and choking sessions)the smoke will start to stale and it will not be a pleasurable experience in the least bit. Making pipes is not as simple as drilling a few holes.
Glue, epoxy and plastic tubes...you definitely DON'T want smoke passing near those...
+tmctomas yeah.. I'm aware now 😂😂 I haven't made one like this since I made this one several months ago.
Dylan's DIY Workshop good thing you've learned, always a good day when you learn something new. Maybe put a disclaimer on the parts regarding glue, epoxy and plastic tubes? Inform more people :)
+tmctomas if I could put annotations on the video I would do that. UA-cam doesn't allow that anymore. But I can explain that in detail in the future
also Osage Orange releases poison gas when heated so maybe be more careful with wood type in the future. dont want someone copying your video and actually smoking the thing to end up dead man.
+HS42 I honestly didn't know that it released a poisonous gas, as it was often used as firewood because it burns twice as hot as ash. A few people tested the pipe and it worked fine. No-one died
I’d classify this pipe as art and wouldn’t use it if I owned one. I own some really expensive glass pipes that I’ve never used. I look at them as functional art.
TheQueenSpider yeah riiiiiggghhhhttttttt. Lmao.
Fantastic design! I'd use that puppy!!
+McGinn's WoodShop thank you!
This young definitely has his act together and it shows in his tutorial, patience in explaining the details of his work. I’m a retired electrician and looking for a side business opportunity. This goes right along with my selection of wooden toy truck production in my new shop. Can’t wait to get started.!!
idk if i would trust smoking from something a non smoker made
+Alyssa Wilson I've made plenty of pipes and I have people who are close who test them. And we've came to the conclusion the ways I make the pipes work out best
You are my inspiration to get back into hobbyist woodworking, i thoroughly enjoy all of your content and style. Nice work and thankyou again for sharing all you do
+Matthew Ballard That's so awesome to hear!! That makes me so happy :)
Thank you so much for taking the time to comment and thank you so much for watching! It's great to hear that people are enjoying my videos!!
Dylan's DIY Workshop it's my pleasure! Seriously keep it up, your craftsmanship truly shows through your videos and people appreciate it! Take care!
+Matthew Ballard I don't plan on quitting any time soon :) Have a great day man!
Nice work she even shaping and finishing this. Really pretty looking. To bad about the momentary gaff, but who doesn't have them every now and then. Just a suggestion that you could use to update this if you're still doing similar.
I'll bet it's well within your capabilities to learn how to cut threads for the jar and there by skip the part where you epoxy the lid into the bottom. Let me know if you try it please. I'd love to see it!
I like the idea of cutting the threads into the wood. I just dont see myself doing a project like that again anytime
Just a personal observation... Several items used here (such as your plastic tubing and epoxy) I would NEVER expose to heat and smoke from!
The process is good, even interesting... But, watch those materials folks!
+Rhal75 couldn't agree more, this video is merely to serve as proof that you can make anything you can think of. If anyone is thinking about doing the same, they should take their material choices into careful consideration
I just quit smoking but that was awesome Dylan.
+Opa's Workshop congratulations opa! Proud of you! And thank you!
Hey Dylan! I am currently inside my woodworking shop in my trade school doing a construction based trade and our computers have no sound, would you mind making this video with subtitles? Thanks bro, love your other videos.
if you click the "cc" button the subtitles pop up. theyre auto generated on all videos. it might be in the little settings button on the video if the cc button isnt there
nice, if you make another one try using a ring for canning jars and this will give you a threaded ring that can fit any canning jar for the size of jar opening you want- from baby food jars to quart jars and you won`t have to drill holes in the lid as canning jar rings have a replaceable lid.
Dude, I subscribed because of this video. Awesome job. But you either have the coolest shop ever.....or....you're making bongs at school shop class! Either way, you're awesome!!
Wish that was my shop lol. someday!
This video should have more views, good work!
+CYNGI thats up to the people watching it! Share it with your friends and it will get more :)
what? recreational purposes only?😁 haha! i liked the 1st song too..relaxing🎶👍
i dont smoke either..
+Joe basementwoodworking the first song is telescope by thefatrat.
Dylan's DIY Workshop pretty cool song bro... so where were you and your buddy going? So you guys walking through the grass or was it weeds LOL no pun intended
+Joe basementwoodworking That's my brother. That's a clip from my one vlog where we go cliff golfing. I do daily vlogs now on my second channel. "Dylan Out Front"
your have some amazing skills I wish I could build myself a bong like that.
+Andres lol thank you! It just takes practice!
If that’s his personal shop. DAMN. Must be nice to have that kinda backing at his age.
schol shop
Nice work
+Ben MM thank you
I'm sorry but unless there's something that came up in the last 5 years, running the bowl near-directly into plastic hosing and epoxy is going to cause toxic fumes. I've done my own diy attempts like this before and all of them had problems with this. Be smart, no plastic or resins near the heat source.
+phil m I don't use resins or plastics any more. Thank you for the support
phil m what about vinyl?
Same deal, as far as I've been able to find, there are no plastics that are safe when too close to the heat source. An example of a relatively safe plastic peice would be acrylic bongs, as long as the downstem is far enough from the bottom that the smoke i'snt touching it, since in this case there's not enough heat touching any plastics to cause it to release toxic fumes.
Also try to avoid aluminium foil, as aluminium can release fumes aswell at too high of a temperature. Same goes for brass, and stainless steel to a degree. Titanium can be safer and is used in proper quality smoking pieces today on the market.
Not my thing... But man looks great dude! nice work
+Mitch Deitrich Thanks Mitch!!
YEa i have full working shop in garden house yea...DIY or Do it yourself is a method of home improvement, where the home owner gets materials and tools for themself, then does the work on their own, without "professional help" "professional help" "professional help"
?
Nice
Dylan went on your site was looking for the exact same pipe on your DIY, didn't see one can you help me?
Thanks
+John Martin were you looking for the bong pipe? Like the one shown in this video?
He already sounds very high.
I know you said you didn't smoke but you should have made a real wooden bong it's time consuming but it's worth it for that nice wood taste / burn
+deaf fly I'm going to make a real wooden bong. I just have to get the setup on my lathe right. And then I'll make one
Looks good, should have found a smoker to show how it works. 👍
I wouldnt use glue and epoxy on them. If i have pipes/bongs with glue/epoxy on them i wouldnt use it
+Breezetix fair enough. I wouldn't smoke either. However you can use a heat resistant epoxy that is good for hundreds of degrees
king of free handing god damn
+Patrick Green :) it's close enough eh?
I'd like if you demonstrated
What did you tell your shop teacher you were making? Lol
+iGro W33D I just didn't
I'm gonna use mine for herbal smoke (trying to quit smoking pot and tobacco)
+llMist Titanll whatever floats your goat!
Dylan's DIY Workshop Sorry for my random ass comment, I haven't slept in a week, so I have no idea wtf I'm talking about this week.
+llMist Titanll 😂😂😂 no worries bro, been there. UA-cam school and work last year had me down to no more than 5 hours a night for sleep
Dylan's DIY Workshop Same, I don't have a job but UA-cam and school are messing up my sleep schedule so damn much 😂
+llMist Titanll you have a channel too? What kind of videos do you make?
I woulda done brass pipe instead of plastic tubing, but i guess uou gotta be a smoker to think of that
+The Age of The Awakening true. I could always redo it
Dylan's DIY Workshop here's my concern, hot smoke traveling through plastic. It makes me think of heating food in plastic in the microwave. Brass would look good too with the dark wood. This is Really imaginative. You put a Lot of work into it. Very inspiring
+The Age of The Awakening I completely agree maybe brass would work
Nice design and creativity; but using epoxy near a heat source you plan to inhale does not sound smart...
itll be high heat epoxy in the next one ;)
"Tabacco use only "
+Azurda Azurda yes, for Sure!
Dylan's DIY Workshop 420
so fuckin big cool
Gandolf's bong!
+Christian Miranda 😂😂😂
Lol u had a tanner Bronghart
+Ty collyard lmao
al final tenias que probar el producto, aver que tal funciona Xd :/
You should have made the base outta wood
You wouldn't be able to see the water to make sure its bubbling right. Also having bong water sitting in Wood not really good for the wood.
I wasn't making a pipe man. Dave's not here
+your face Lolo what
I don’t think anyone would really care anymore if you smoke or not 💨
I guess its canada in 2019. But its still true
but the tube is plastic?
+Kaged Creations plastic tube
How to get higher than the moon
lmaoo
nice meme
+Dejon Nathan meme meme
simple way to smoke
+йцукен ячсмить "simple"
if u dont smoke weed then why make this
+Breezetix to educate. To show my problem solving ability. To show someone who does smoke and can't be swayed to not smoke. To make something new. To grow my channel. Is that enough reasons?
4:30 song?
+1323GamerTV all songs are in the description
Would you sell this?
+FPSAmerica this specific one has sold. But yes. I would make another. Email me at dylansdiystudio@gmail.com or dm me on Instagram @dylantaylor_youtube
bruhhhh dont smoke out of osage orange
Education my ass
well uh...
@@DylansDIYWorkshop you build it to smoke not for education you don't learn for fun you learn to learn in general
blown away at how well you think you know me 😂😂 you know what they day about assuming ;)
Lost me at don’t condone either you have a twisted sense of humor or just don’t understand what condone means.
You dont condone smoking? I dont think you're using that word right
Hals je het niet goed kurt. Dan moet je ook geen video maken toch ...
+johnversluis versluis I don't know specifically what that says. I believe that's either ducth or German?
I respect the hussle but this pipe is stupid