Cleaver Restoration [Golden Cleaver With Golden Handle]
Вставка
- Опубліковано 17 лис 2021
- I have used two new techniques in the restoration of this rusty cleaver. The first time I use a hardening furnace for the blade to harden and I galvanize gold on the formerly rusty cleaver. I made the new handle out of Osage Orange and brass, which now revealed a completely gold cleaver. Restoring the old cleaver I had to drill, grind, file, remove rust and glue. This old hand tool I found again on a flea market website and wanted it badly.
▬ What did I do ?! ▬▬▬▬▬▬▬▬
The cleaver was badly rusted, so I put it in rust remover for a day. I removed the remaining rust with sandblasting. Afterwards I made the rough contour with a belt sander and sanded the sides until no more pitting was visible, up to a grit of 1500. With the help of a grinding stone I sharpened the cleaver again. Now I gilded the old hand tool with the help of electroplating. The new wooden handle is made of Osage Orange. Now all that was left was to assemble everything and the golden cleaver was ready.
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: Hammer, pliers, wire brush, sandblasting cabinet, corundum 0.2-0.8mm, belt sander, double-sided tape, orbital sander, multi-function tool, file, key file, hardening furnace, immersion heater, Rapeseed oil, forging pliers, stop angle, pen, steel ruler, saw, cordless screwdriver, drill, scriber, caliper, fretsaw, two-component glue, screw clamps, sandpaper (various grits), polishing bench, grindstone, galvanic current device, degreaser, activator, gold electrolyte
▬ Special Thanks to my Members! ▬▬▬▬▬▬▬▬
Debora Richards
Zamzuraini Zolkiple
▬ Do you want to support me? ▬▬▬▬▬▬▬▬
Would you like to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
www.paypal.com/donate?hosted_...
▬ Did you like it? ▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it! Many Thanks! - Наука та технологія
![Hatchet Multitool Restoration [Axe, Hammer, Prybar, Nail Puller]](http://i.ytimg.com/vi/hEUXZFpEhR4/mqdefault.jpg)
![Hatchet Multitool Restoration [Axe, Hammer, Prybar, Nail Puller]](/img/tr.png)
![Rare Double Cleaver [Black Blade With Kingwood Handle]](http://i.ytimg.com/vi/mFusXojhLjQ/mqdefault.jpg)
![Water Pump Pliers Restoration [Laser Engraving And Red Rubber Handles]](/img/n.gif)
Finally - a restoration video that actually gets rid of the pitting!!
The gold electroplating was a cool little extra! I'd recommend shaving down that handle considerably more - the chunky, square handle has got to feel like a nightmare to hold in your hand 😱
It doesn't actually feel that bad ...
@@ForgottenShineRestoration Hi
Hi
S
More grip means more control.
There’s absolutely nothing better than watching your phenomenal videos on a cold day. Just the absolute care, dedication and quality you put into your restoration is enough to put a smile on anyone’s face
Thank you very much for your kind words!🤗
-11C where I am. Good start for the winter.
Aw that little ghost on the rust remover uncapping was cute lol
DANG! THAT RUST REMOVER IS POWERFUL!
@Candy Queen gacha it kinda looks like poison…? 😅 just me? Okay I’ll shut up now.
This was an amazing restoration! The handle did look as if it would be uncomfortable to hold, but it was amazingly decorated! You have a new subscriber!
Thank you very much! 🐢😊
lemme guess, is it… rick astley?
That's very polite..
I thought it looked like a dog turd
@@nugget1044 nope, Patrick Bateman
Interesting handle choice there. Almost looks like it’d be fairly uncomfortable to hold. And Thats a very neat way of applying a gold plating!
Side note, turtle is my favorite recurring character of this series
Thank you very much! 🐢🐢
same thought i had
If only I could be so polite...
Big Fan Bro Big Fan♥️
This is a masterpiece. Congratulation from Vietnam.😉👍🍺
Thank you very much! 😊🤗
Nice, but the handle needs to be contoured for a more comfortable grip.
What a beautiful piece of art! Love these, keep the knive restorations coming!
Thank you!
Another religious experience , resurrection
in its purest form!
Your talented assistant
is always on hand and at the right time.Thank you both, fascinating videos
the cleaver in the beginning without the wooden handle looked hilarious lol. like a little chihuahua tail
This is so so amazing and different from other createors' content, the best way I could put this is that it feels like an itch finally getting scratched.
The heart with the sand blaster made mine own heart happy. That, my friend, is the main thing I'd do the moment I got one 😂 one day! 😂
🤣🤣
THATS AWSOME
Thank you very much!
Why is everyone so mad about the handle, the entire cleaver is a work of art that obviously took so much hard work
Thank you very much! 🐢
No hate but that handle isn't it
Ooh! I love the shine, big fan of the golden design! Overall amazing job done by the king 👑
Thank you very much!
I would 100% buy this for my partner, we collect knives and SHES into really pretty decorative ones while im into more historical and unique ones, but I think she would love this as a art piece lol, 10/10 beautiful work
*idk why the “shes” capitalised my keyboard is buggy idk
A nice gift for Mr. Goldfinger. With this cleaver, he hadn't need to use a laser for cutting 007 into two pieces. 👍😁😇
Really, really good job. I always like how it goes from a rusty piece of junk to something that could potentially become a persons favorite item to use. The handle still looks a bit bulky but other than that great job.I’m a new subscriber but I watch ur vids all the time and today I forgot I wasn’t subbed to u. Keep up the great work!
Thank you very much! 🤗🐢
I was so with you until the last few minutes. I guess this is more of an art piece than a tool, which is fine, but not for me. You will probably forget more knowledge about crafting and restoration than I'll ever know, so I won't pretend to be an expert, but it drives me crazy to watch people put these razor sharp, super delicate bevels on cleavers like they're a paring knife. And to go through all that work and leave the handle a massive rectangle? It seems like you've got some pretty big hands so maybe it works for you, but man that ending was so anticlimactic.
Agreed
Yeah I’ve seen a few of these videos and he tends to make the handles big and bulky, which I find very unsatisfying. Amazing work pretty much everywhere else but those handles always frustrate me lol
I can understand the inappropriate bevel to play up the sharpness for UA-cam, but there's no excuse for that godawful block of wood for a handle.
I was about to say the same. It looks like half a job.
I agree but at the same time it probably takes almost a week to complete and it'll probably be very fustrating to use a small handle then it breaks And it probably fits him best so at the same time I disagree with you😵
I want to call you a master of your craft, but that doesn't begin to sum it up. Thank you for such informative (and satisfying) videos!
Thank you very much! 😊🐢
These knife restorations are real pieces of 🎨🎭 Art. Please keep them coming.
But always mix things up a bit.
Parabens pela dedicaçao ao seu trabalho, que continue assim👏👏
Muito obrigado! 🐢
What an amazing restoration,the video is so relaxing also,good job man !!!
Thank you very much! 🤩😊
Never see the galvanised gold on before, that was cool. Thanks for posting.
This man goes out finding rusty things just to entertain us now that’s big brain
So shiny! 😀Great work, I really like the close-up shots. Nice touch with the gold plating
Thank you very much! 😊🤩
These videos are so cool and relaxing to watch. I think it is amazing how you restore items that appear in such harsh conditions and make them even better than they were in their prime! Keep up the fantastic work! And I hope all is well!
Thanks very much! 🐢
Please continue your wonderful work some folks love to add what they think needs to be done, please don't listen
Stay the course and do it your way
THANK YOU !!
MAGIC SPARKS!!!! WOW LOVE THE VID!!!!
Thank you very much! 🐢
Excelente trabalho. Parabéns 👏👏👏
Olá Marcello. Obrigado e bom ler de você novamente ..🤩
@@ForgottenShineRestoration 私はあなたのビデオが良い仕事を続けるのが好きです
Awesome job! Keep it up Bro! 👏🏼👏🏼👏🏼
Nice to read from you Bro, thank you so much!
Nice job , but the old handle was more comfortable and more beautiful
These videos are so fascinating (and frankly relaxing) to watch
Thank you!
First one of your vids that I’ve seen. Very nice restoration and the polishing then gold plating was phenomenal. I think the wood and brass that you chose for the handle are great but it looks kind of bulky and unfinished. It’s still a great cleaver. You have a new subscriber.
Thank you very much!
Красиво! Только я не понял, зачем квадратный профиль у рукояти? Держать ведь неудобно.
I wondered this also?
Я думаю, что в руке лучше, чем я думал, я думаю, что выглядит красивее ...
@@ForgottenShineRestoration cox gozeldi amma desteyi kvadrat lazin deyildi mence
I’m so glad this guy removed the pitting because other videos I’ve seen don’t and then the cleaver looks ugly this one was done very well
Thank you very much!
This is so relaxing... Thank you very much.
Хороший перевод субтитров : вертолёт звонил дважды в час ноооорм
Да субтитры это п****ц
ВоПРОС ! Кому это дважды в час звонит вертолёт ! Оранжевому океану ?
Just subscribed and wow your extremely underrated I wish I have found your channel sooner I’m really obsessed with these vids love your craft and how patient and gentle you are with your craft keep up the good work 👍🏻
Thank you very much!
Your videos are so soothing to watch and the little bits of personality you add in them are so great, they really put a smile on my face
Thank you very much for your kind words!🤗
yes is very good 😎👍🏻
love ❤️ from @amrphone
Love those restoration videos, wonder if we ever gonna see a full human restoration
É um trabalho artístico...devolve a vida útil da peça... parabéns por seu trabalho,uma arte!❤️
Muito obrigado!
You deserve way more views... This is one of the most interesting and relaxing things i've seen in a while.
Thank you very much!
Man your amazing in taking rusty into goldy 🔥😳💯
Thank you very much for your great comment!😁
Sou de Rio do Sul SC Brasil e achei seu trabalho maravilhoso
Obrigado! Saudações ao Brasil! 🐢
진짜 신기하다
Muito bom, inclusive o detalhe decorativo 👏👏👏👏👏🙏🇧🇷
Muito Obrigado!
Você é montanhoso
@@jluis.Alves_ 🤔 ???
@@Tatal.b adios
@@jluis.Alves_ Desculpe-me, não entendi o que você quiz dizer, se sou montamhoso
Loved the little ghost.
This was amazing! I know nothing of metalworking, but the noises are so calm, I fell asleep watching these last night.
😅😅 im glad to hear it
It's a good job, But the handle of this cleaver does not look so good, In my point of view if it will be round handled would look more beautiful. The Original handle was also round.
ok, thank you for your feedback!
fantástico, sensacional! Like garantido👍
Ein richtiges "Schine Restoration" 😄💫toller Job!
Vielen Dank 🤣👍
Excellent work. That is a nice trick with the clamp and vise. I need to remember that one. Cheers!
😁👍🐢
Hello and i really love your videos especially the process you do which is oddly satisfying,keep up the good work!
Thank you very much!
What is that crusty stuff that came off when it was put in the oil?
That is an oxidation layer that was formed during the heating of the steel. Also called 'scale'. It's very brittle and tends to flake off during quenching. Perfectly normal but not something you'd ever want to leave on the steel for a knife like this. You can wrap the blade in steel foil or use an inert gas furnace to minimize oxidation during heat treatments.
@@CatalystRestorations That's cool! Thanks for answering! And the quenching is to soften or harden the steel? Cool it slow to make it softer and cool it fast to harden it?
@@Scott_G It technically depends on what type of steel you are dealing with, but in general the faster you cool (quench) the harder the steel. Quenched steel is usually very brittle though (good strength, but can't absorb a lot of energy before breaking, AKA material toughness ), so after quenching you usually heat it back up again (lower temperature this time, called tempering) to soften it up just a bit to keep most of the strength but also improve the toughness and give you the best of both worlds!
@@CatalystRestorations Wow, that's so much more complicated than I ever thought it would be. Thanks again for the explaination. :)
@@Scott_G Welcome to the field of metallurgical engineering! 😁
i love how you do your work with so much passion bro keep up the good work i hope you have a great future :) ✌️
Thank you very much!
Gold just makes everything better
15:15 guys be mature.
Dude, I want that skull bottle. Way cool ✌️😎
اللهم صل وسلم وبارك على سيدنا محمد وعلى آله وصحبه أجمعين يارب العالمين
اول عربي😍😍😍😍😍😍🤚
Damn. I was sure that handle would be too big but actually seeing you hold it, it was actually seeming like a nice handle. Though, you do seem to big-ish hands so maybe those with small hands might have had a problem. I'm glad it looked so cool and looked actually nice to hold!
I liked the handle, it makes it look oriental
The blade restoration was top notch. However, in my opinion, the handle was absolutely horrendous.
You are so good at what you do. Every video the tool is restored good as new.
Thank you very much! 🐢
Молодец. Смотрел до конца. Хороший контент. Заранее извиняюсь, но рукоядку я бы сделал анатомическую как старая была.
Большое спасибо!
Very nice yes 👍 great finished project.
Love the new handle. A lot of time spent polishing up that blade I bet.
Thank you for your great comment! Yes, polishing can take a few hours, but it's worth it ...🤗😊
@@ForgottenShineRestoration I know right.
Osage Orange wood? That’s a fancy handle right there.
Thank you very much!
i love watching the videos, they are stress relievers lol
Let us appreciate this man's time and life to make us these
Thank you!
Friend, a decent job a storm of liked. Congratulations and always continue like this. a brazilian hug
Thank you!
Great Job Bud, even with all that Slow motion effects.....
Please round off that handle.
Couple things. No need to gold plate a cleaver plus the handle was basically square. Round off the handle to a more oval shape. Plus the tang was so skinny, I thought it might break off during the process. I'd shape the handle then only cut out enough brass to cover that. Other than that, great work.
Really beautiful!!!!
Thank you very much!😅
Instead of doing homework, I now watch these restoration videos.
But homework is also important! As a little break you can of course watch it😅😅
Like for sure in this restoration 🤝👏🤝👏🤝👏
Thank you!
Nice finish well done.
Thank you! 🤩🐢
My hands seem way too small for the handle, but it looks very pretty.
Also the gold touch is just *chef’s kiss*
🤗🤗👍
A lot of people talking shit about the handle... I have seen a few of your videos and know that if you wanted this handle to look different, you would have made it different. I like the square look. Fantastic job 👍
Thank you very much!🤗🐢
I can’t be the only one who’s scrolling through the comments and noticing just how kind these people are… 😅 I’ve never seen such an inviting comment section. ❤ (keep up the good work)
Thank you very much! 🤩 🐢
Dang, you take the cake for restoration channels dude.
🤗🐢
That bottle gets a like!
Looks good
15:10 HEY BRO WTF ARE YOU DOING? Great work with the knife bro
انت شخص رائع احب ما تفعل احب ان ارا الأشياء القديمة (التالفة) تعاد من جديد مذهل ❤️
شكرا جزيلا! 🐢
I just sat here and watched this whole video because I can’t go to sleep and let me say it was very interesting
Thank you! 🤗🐢
Am I the only one who loves the handle?
Just found ur channel! Love your videos! Going to subscribe! Keep up the good work!
Thank you very much!🐢
Amazing job 👍
Thank you!
You are a wonderful person, you have the potential, I love your work so much
Thanks very much! 🐢
أفضل حساب في اليوتيوب ☺️
شكرا لتعليقك الرائع!
Very satisfying 🌟👌🏻 Beautiful filming and great outcome. Thank you for sharing with us 🗜️⚒️✌🏻
Thank you very much! 🐢
@@ForgottenShineRestoration with pleasure ✌🏻
CHONKY handle, I love it. Really great work!
Thank you very much! 🤗🐢
Welcome back Welcome back
"Until the glue dries I finish off the blade"
*Airplane engines roar overhead*
U proved that old is gold
I love restoration
i love it too! 😅
ua-cam.com/channels/SRwBgeKfE4txYvwZKLcIHw.html