⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/users/AutoRepairGuys
Thanks to this video! My 2014 Ford f150 is been doing this for 2 weeks now! Replaced the fuel pump! Fuse and relays and still having issues! Now I’m gonna try this
My dodge magnum 2006 3.5l do the same thing After turning car off after car warm it won’t start till I let it sit for like 20-30 then it start up only code I scan for was p0058 any help to let me know what it can be?
A bigger tip don’t waste your money on parts first like he says it’s not always the case In fact studies show 20% it’s a sensor fix ALWAYS check wires first Your first job is continuity tests FIRST after a scan A scanner is the wrong hands and someone that changes parts and crosses fingers is bad news check wires
It depends. Some manuals say to relearn. You could as suggested, run through the relearn? Not sure. It might be worth it. "What have you got to lose?" 🙂
My car started in morning and when hot immediately just closed to get stuff from my job place. D we hen came bsck after 5min my car cant start please suggest problem .still left in parking
My problem only happens when it’s hot outside. My car always starts perfectly all day long as long as it’s under 75 degrees Fahrenheit outside, but anytime it’s hotter, like 80 degrees or more my car has an extremely hard time starting. It’s a 2017 honda Civic with the 1.5T
ok i got the similar problems, Car starts cold all good. everything works until it's hot then we have digital mileage showing our mileage also some lights is not showing on dashboard plus the obd port is not working. I did scan the car and we only have the code P0140 o2 sensor Activity bank 1 sensor 2. But we had that code for a long time as we have removed the catalytic converter and made it free flow. But we never had any problems over a year. If the sensor packs up will it give out a code?
@@automotivetv9861 I found the problem about 3 week ago. A small plastic part in the ignition assembly that swelled and shrunk with the outside temperature. The part cost me less then $100. Had to go through the steering panel to get to the part .
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/users/AutoRepairGuys
Thanks to this video! My 2014 Ford f150 is been doing this for 2 weeks now! Replaced the fuel pump! Fuse and relays and still having issues! Now I’m gonna try this
my car does exactly that, thanks a lot brother
I have this issue with my Mercedes Geländewagen 270cdi 2004 model. I have ordered a new crankshaft position sensor and hope that will fix it..
My dodge magnum 2006 3.5l do the same thing After turning car off after car warm it won’t start till I let it sit for like 20-30 then it start up only code I scan for was p0058 any help to let me know what it can be?
Thanks for your teaching,I appreciate
Did it fix the problem
Thank you for your video, well explained ❤
What if vehicle is carbureted and has same issue ?
Can you still start the car if there is no continuity in the wires of the camshaft position sensor?
I have the same problem on Nissan Vanette petrol
Damn crankshaft sensor!!!!
Thanks for the video and information, AUTO REPAIR GUYS
Im having this issue with mazda 6 05
Hola señor de dónde eres .
my 2005 jeep does this...I need a step by step on jeep...
A bigger tip don’t waste your money on parts first like he says it’s not always the case
In fact studies show 20% it’s a sensor fix
ALWAYS check wires first
Your first job is continuity tests FIRST after a scan
A scanner is the wrong hands and someone that changes parts and crosses fingers is bad news
check wires
So,no need to do a re learn when replaced them?
They don't answer comments mate, I've tried before.
just clear the codes with the scanner tool.
Do you replace it ???
It depends. Some manuals say to relearn. You could as suggested, run through the relearn? Not sure. It might be worth it. "What have you got to lose?" 🙂
My car started in morning and when hot immediately just closed to get stuff from my job place. D we hen came bsck after 5min my car cant start please suggest problem .still left in parking
You are absolutely 👍
My problem only happens when it’s hot outside. My car always starts perfectly all day long as long as it’s under 75 degrees Fahrenheit outside, but anytime it’s hotter, like 80 degrees or more my car has an extremely hard time starting. It’s a 2017 honda Civic with the 1.5T
Air filter clogged or maf sensor!
ok i got the similar problems, Car starts cold all good. everything works until it's hot then we have digital mileage showing our mileage also some lights is not showing on dashboard plus the obd port is not working. I did scan the car and we only have the code P0140 o2 sensor Activity bank 1 sensor 2. But we had that code for a long time as we have removed the catalytic converter and made it free flow. But we never had any problems over a year.
If the sensor packs up will it give out a code?
I had this on a vauxhall
What was it a Corsa D, 1.0L won't start warm after changing 02 sensor 1,2 and EGR valve. Pulse sensor crank sensor. It's still the same.
That could be a crankshaft position sensor too
Zdravei mojesh li da mi pomognesh s BMW 1 series 2.0l diesel I cut out I neiska ba zapali please help 😭
thanks for the tip, you just helped me to fix my cayenne.
My car do not start when I park it under the sun heat but it do start when parked under the shade
My car is Audi TT. What can be reason?
Hi..I have same problem..have you found a solution?
Same problem. Audi TT mk2 2.0 diesel
My car starts when it’s cool outside but once it get above 75, it won’t even turn the starter.
Did you find out what the problem was? Im having the same issue in my accord!
@@automotivetv9861 I found the problem about 3 week ago. A small plastic part in the ignition assembly that swelled and shrunk with the outside temperature. The part cost me less then $100. Had to go through the steering panel to get to the part .
I would get annoyed AF if some foreigner was running an auto repair shop out of his residential garage in the city. Buy or rent a damn shop!