Schumacher LD3 Stock Spec Build - Step 10

Schumacher LD3 Stock Spec Build Step 10. Had to trim a bit of excessive flashing from the ball cups. Make sure to have all the left hand threads on the left side of the car. Left side of the turnbuckle is indicated by the shoulder by the adjustment flats in the center of the turnbuckle. I'm happy with the quality of the plastics. Not too hard or too soft. Threading the turnbuckles into the ball cups was easy. Should make for easy adjustments once on the car and they shouldn't pop off the ball studs since the threading felt just right.
Please buy from your local hobby shop or consider supporting mine!
Check out Houston RC at houstonrc.net/
They do have an online shop, but if they don't have what you need, you can message them here to order [e-mail]
Kit, Upgrades, and Electronics I will use during the series.
Schumacher LD3 Kit - houstonrc.net/...
Aerox AX009 - houstonrc.net/...
Brass Pivot Block - houstonrc.net/...
Brass Radio Tray - houstonrc.net/...
Alloy Front Link Mount - houstonrc.net/...
Hobbywing XR10 Pro ESC - houstonrc.net/...
Hobbywing Xerun 17.5T Motor - houstonrc.net/...
Hobbywing Programming Box - amzn.to/3H0S9Ot
Yeah Racing Bullet Connectors -amzn.to/3CIoXcx
Good supplies to have for the build:
Tamiya Shock Vacuum - amzn.to/3YnRkoD
3D Printed Ball Cup Tool - www.thingivers...
ProtekRC O-ring Grease - amzn.to/3sO4EVO
ProtekRC gearbox grease - a.co/d/2Vd4FKm
snips, diagonal cutters - amzn.to/3CcuN4V
x-acto blades - amzn.to/3Ni7ZWe
Blue Loctite - amzn.to/3KsZh6l
Digital Scale - amzn.to/3yxMGu6
Bearing Oil - amzn.to/3cV2VJI
MIP Driver Set - amzn.to/3FhjpFP
MIP Speed Tip Driver Set - amzn.to/3wZOIlV
Calipers - amzn.to/3ntNkT9
Shock Pliers - amzn.to/3yye9vX
Lexan Scissors - amzn.to/3WfByuQ
Electric Screwdriver - amzn.to/3ACqpew
*Notice: Some descriptions may contain affiliate links, which means that if you click on or use one of the product links/ codes, we may receive a small commission. This helps support the channel and allows us to continue to produce content.