Це відео не доступне.
Перепрошуємо.
CAMWorks Tutorial - Assembly Machining
Вставка
- Опубліковано 4 лют 2020
- This is a great introduction video to the world of CAMWorks and SOLIDWORKS CAM assembly mode machining. It explains how to get started, the proper work flow and the advantages of programming in assembly mode vs part mode. Many people would benefit greatly by taking advantage of assembly mode programming but just don’t know the work flow so they opt to continue using part mode and to me this is unacceptable. So I decided to make a video that introduces you to assembly machining and by the end of it you should have the confidence to step into the world of programming in assembly mode and taking full advantage of its capabilities.
www.goengineer.com
/ goengineer
/ goengineer
/ goengineer
how to orient workpiece in machine TIA
I don't expect this to help you 2 years out. But you orient the workpiece in the machine by defining your coordinate system to whatever coordinate system origin your machine uses.
If you are establishing your origin by probing the stock then you can use the stock vertex, if you are using an established fixture coordinate you can specify that position in relation to the part being machined or as a position on the fixture plate.