Hi TC, Really good video mate! One thing you left out was the retention of the factory rear camera that I assume would be annoying 6volt, do you have any info on that? Cheers, Phil UK
I also plan to install android radio, you made a useful video for easy installation of a new radio, now I know that I will need to go the same way. I have the same set of speakers as you. Eldar from Kazakhstan.
The passenger seat heater switch was moved when they installed the big cooler type center console. The center console is blocking the original position switch location.
your passenger side heater switch would actually go in the blanking plate close to where you found it - your centre console is covering up the hole and lighter socket hole - maybe that centre console (between seats) is not the original one?
I extended the wires and relocated it next to the other heater switch for the driver seats. The center console I have is an optional accessory that came from Toyota in Japan. Some Alphard have them and most don't in the Malaysian market.
Finally we have purchased a 2011 purple Vellfire V6 with the same rear seating as yours. Can you recomend a company that exports all kinds of accessories for these vehicles please (ambient lighting etc).
That's great to hear. I can't really recommend as i get my accessories for this car from various platform. Mainly Shopee for Malaysian sellers and Aliexpress for China purchases.
Hello, I liked you carpet, where can I find, can you put link of site to buy this android radio and carpet as well, because I'm living in África/Mozambique
The carpet came with the car when I bought it. The android player.... i got it off a Malaysia online platform and I don't think they ship internationally.
Sorry to bother you. Where did you source that new center panel from? I have a 9" Teyes CC3 2k, and tried the trim kit that came with it for 2008-2014 Alphard/Vellfire, but the head unit just falls back from it at the top. I would love the same like you have there. Thanks again!
I don't have the exact link anymore since its been around 2 years plus ago. But here is another link selling the same thing i have. But mine is for a 10 inch player. 9 inches are kinda uncommon here. shopee.com.my/TOYOTA-ALPHARD-VELLFIRE-ANH20-2008-2014-10''-INCH-casing-android-player-T0-277-i.239678995.10716833732?publish_id=&sp_atk=5ea9e3fe-53b8-44df-be0c-cf08a9f94615&xptdk=5ea9e3fe-53b8-44df-be0c-cf08a9f94615
Depends on how the camera is wired. As my car does not have multiple camera so I can't really advice. If the camera is individually connected to the old player, then it cannot be done. If the cameras are connected to a centralized/hub controller then maybe. Cause Android players only has one camera input.
Hello mate,I recently bought a ekiy t900 head unit for my 2009 Vellfire,same your van,your video helped me a lot to find right cables but having trouble to find speaker cables from original wire loom can you kindly help me with that and already contacted steering wheel wires but all buttons working only one function I’m based in London.😢😢
Hello. If your Vellfire is the same as mine, then your speaker loom is under the passenger seat. Not the head unit loom as it only has a digital out to the amplifier. You will need to program the steering wheels button on the headunit. Somewhere in the settings, look for steering wheel. Programming is as simple as choosing the function and holding the steering button down for a second or two. Hope this helps.
So it’s mean I have to get the wires from android head unit to amp or just cut the amp wires and reconnect to android player right,but my android player got 4 channels,hellfire got more than 4 channels right,sorry bit confused,can you kindly explain a bit please and You are a star mate thank you
@@Cham.88dis i explained it in the video So, you have to pull 8 wires from the android to where the amplifier is. Then from there, connect it to the speaker wires that is there. Amplifier can be removed. Yes, the android head unit is only 4 channels where as we have 18 speakers (i don't know how many channels are in the amp). So you just test and see which speaker you want to connect to which channel.
I see only one power steering motor in my car. I disabled the auto park feature the moment I change to Android. Even the switch for it have been removed. I find auto park as a gimmick cause ALL the time I tried to use the auto park, I am wasting more time adjusting it. I think most of us will be able to park the car much faster than the auto park.
TC, I purchased my Tesla Style Android device about a year ago and have it installed in my Alphard 20. The main reason for me making this purchase was to be able to have video in the front as well as the rear with my overhead monitor... The problem is there is no video out on the Android device and I am wondering is there any way possible to be able to get this to work or did I just take a loss... Your help would be greatly appreciated!
That's odd. I owned 4 different android players and all of them have video out. But mine is all 10 inch universal android players and not the tesla style player. Do you still have the link where you purchased yours so I can see what comes with the player.
@@TCsAnythingGoes can you upload a video of your head unit, is the radio working ok ? I have a cheap android player and the radio is terrible, the android auto only connects with usb, I was looking at getting a proper pioneer SPH-EVO950DAB and get a normal double DIN facia, as i think everyone likes the idea of these android players, but they always have issues
@@monkins1010 my radio works fine on this unit. A cheaper unit that I installed in my other car, the radio ain't good. The difference I see is that my Alphard uses one with RDS chip
Hi TC , I just purchase my vellfire ANH20. Same spec like you. Unfortunately my head unit can’t use to open roof monitor and no sound at all. I believe my power amp speaker under front seat passenger was problem.. Look like yours amp same like my power amp. Are you plan to sell ? 😅
my amp have been sitting in storage for almost 2 years already. Not sure if it even works anymore. why not consider changing to android player? Its cheaper and actually produce better quality sound (if you get the hi-end android player). Only thing i gave up was the auto parking and the parking assist line (the line that turns as I reverse and turn the steering). Both features that I do not find useful.
oh ok2. i prefer to have original spec. now have head unit just plug in to cigarate point. Have 10" monitor. similar as android player. Anyway thanks bro. now i know how to dismantle every part of my vellfire .@@TCsAnythingGoes
Hello again the one i was able to buy has a DSP amp but only 4 outlets for speakers. FR, FL, RR and RL wondering how you wired your two large door speakers in and the centre on dash speaker please? hope you can help as think your car is same as mine. regards steve in uk london
center dash speaker goes to the FR line. door speakers..... front door or rear doors? You can follow the color code at the original amp. it has 4 sets of color only which makes me believe its a 4 channel amp as well.
@@TCsAnythingGoes hi TC the front door speakers I thought because they are big they are subwoofers? BUT NOT SURE. when looked at your video between 13 and 15 mins you didn`t say how to connect all of the speakers and would really help me out to know what you did do please? thank you again steve
The only subwoofers were the one under the driver seat. I basically just twist all the wires together according to each channel and polarity then connect it to the red/black wire i pulled from the player.
@@TCsAnythingGoes Ok thank you TC. Can you please send link for the Antenna Adaptor harness/cable please. looked everywhere but cant seem to find it. thank you. steve
Here ya go. Sorry for the late reply. UA-cam doesn't sent me notifications for replies on top of replies. shopee.com.my/CRIMEFIGHTER-%F0%9F%92%A5Ready-Stock%F0%9F%92%A5-MALE-RADIO-ANTENNA-HARNESS-SOCKET-FOR-ALL-TOYOTA-CAR-i.43715877.1761124418
Hi. I am about to buy a Vellfire GGH25 and it comes with Japanese language. Some people told me that it uses the same Screen etc. like the ANH20. Do you know about it? I really want to replace it so that I can actually understand the menu and settings and use waze, spotify, radio etc. I do not need the navigation system which comes with the car. Just the standard functions of this car. I will be in Malaysia again around June/July and I hope to find a solution at there which I could bring back home to get it done.
even if it uses a different screen, i will say RIP it out and install an Android player. much more connectivity and the screen is better too if you get a decent android player.
@@aijesa8185 my original screen was kinda junky and it was all in Japanese hence i did not explore much but I do know i lost the below functions - auto parking assist - reverse line (the one that turns with your steering when you reverse) Both are functions that I can live without.
@@TCsAnythingGoes Ok sure. Parking assist I also don´t need, because I either know how to park or not. Reverse line would be nice, but I could easily install a new camera and get it to work I guess. Aircon, lights, music etc works fine? Thanks for the information so far
I used a wireless transmitter to connect my reverse camera. ua-cam.com/video/OJY9vSxaQaI/v-deo.html Only applicable cause I changed to an AHD camera which is much better quality that the original.
Thanks for thje video. Can you tell me where to get the frame that fits the android player? I have the same android player and right now it is jutting out. ugly!
I can't find the exact link where I purchased it from since its been almost 2 years already. But the link below is the same thing and I am not sure if they ship outside Malaysia. shopee.com.my/Big-Screen-Casing-Android-10-inch-Toyota-Alphard-Vellfire-ANH20-2008-2014-(without-Socket)-i.115959142.7147888983?sp_atk=cf741ab0-2cfa-453e-a488-d38aac223621&xptdk=cf741ab0-2cfa-453e-a488-d38aac223621
@@TCsAnythingGoes Another question, if I may hijack this discussion...is there a 5v source near central light and automatic door controls that I can use to power my dashcam so I don't have to route a wire through the dashboard and have it take up a USB slot. Thanks!!!
@@renecanlas8617 There isn't. What I did was i extended a 12v to the back of the glovebox and connect it to a 12v socket that I purchased aftermarket. Then after that I just connect those 12v socket to usb and be done with it.
I connected my Android player to a new 17 inch roof monitor. Ran new cables to the roof monitor. Cause my original roof monitor..... the lcd is gone (probably due to over exposure to heat.) But technically should be do-able if you can identify which cable is the video input for the roof monitor. Just need to splice it and add on an RCA connector.
Hello fantastic thank you for this. we live uk london. can you please tell me the model number of the unit you have installed please as think we have the same model mpv as you. thank you steve
So good to hear that my video even reached London viewers. Here is the link to the player i purchased but i am not sure if they ship internationally. shopee.com.my/2021-TOP-MODEL-6GB-RAM-128GB-MEMORY-SKY-NAVI-CAR-ANDROID-PLAYER-i.286132689.6962168591
@@TCsAnythingGoes Thank you so much is that where you got the 10" casing from as well please? I would like to send pic to you that shows where the passenger heated seat switch is on my mpv as I think you mentioned in your video, you found the switch inside your consul my email is stevencarresq@gmail.com if you want me to send you a pic of location drop me a mail and I will send pic. Tip for you. Just found out leave mirror selection button in middle position and the mirrors don`t auto tilt. thanks again
I got the casing from here - shopee.com.my/TOYOTA-ALPHARD-ANH20-2008-2014-10-ANDROID-CASING-(FREE-PLUG-PLAY-CABLE)-i.41956296.3641867283 Thanks for your offer, I believe the passenger heated seat switch is supposed to be located at the center console next to the 12v plug. But since I am having the cooler box console, so the switch was thrown and forgotten inside the dashboard. I extended the wire and placed the switch next to the driver side heated seat switch now.
@@TCsAnythingGoesты подключил 4 канала. Работают ли при таком подключении динамики на потолке? И работают ли все остальные динамики ? На панели слева и справа?
@@TCsAnythingGoesдинамики, которые на потолке над третьим рядом сидений к какому каналу подключены? К заднему левому (черный+ жёлтый синей фишки) и заднему правому (красный +серый синей фишки). А коричневая фишка не знаешь для чего?
Ada perlu tambah apa apa part kah boss.. Sebab saya pasang soundstream player.. Tp baru perasan speaker depan saja yg bunyi.. Bahagian belakang tiada sound
Siapa yg pasangkan? kalau kedai yg pasang, suruh dia orang check balik wiring dia. Lagi kena check setting kat player, mungkin fader dia set ke depan saja. I direct connect speaker output dari player terus ke speaker je. Tak tambah apa apa. I keluarkan amp dia ada la.
Hi TC,
Really good video mate! One thing you left out was the retention of the factory rear camera that I assume would be annoying 6volt, do you have any info on that?
Cheers, Phil UK
I also plan to install android radio, you made a useful video for easy installation of a new radio, now I know that I will need to go the same way. I have the same set of speakers as you. Eldar from Kazakhstan.
The passenger seat heater switch was moved when they installed the big cooler type center console. The center console is blocking the original position switch location.
I’d love to do an android install but I don’t want to lose the factory features. Loved the vid. Keep them coming
your passenger side heater switch would actually go in the blanking plate close to where you found it - your centre console is covering up the hole and lighter socket hole - maybe that centre console (between seats) is not the original one?
I extended the wires and relocated it next to the other heater switch for the driver seats.
The center console I have is an optional accessory that came from Toyota in Japan. Some Alphard have them and most don't in the Malaysian market.
Finally we have purchased a 2011 purple Vellfire V6 with the same rear seating as yours. Can you recomend a company that exports all kinds of accessories for these vehicles please (ambient lighting etc).
That's great to hear. I can't really recommend as i get my accessories for this car from various platform. Mainly Shopee for Malaysian sellers and Aliexpress for China purchases.
@@TCsAnythingGoes Thank you so much TC for the reply, Aliexpress looks good. Best wishes ✌😎
Hi TC, did you managed to find the speed pulse input wire?
Hello, I liked you carpet, where can I find, can you put link of site to buy this android radio and carpet as well, because I'm living in África/Mozambique
The carpet came with the car when I bought it. The android player.... i got it off a Malaysia online platform and I don't think they ship internationally.
Hi again, will be coming to KL again on monday. Can you recommend any shop to buy from? Except online shops
tks for sharing,but u link per pair speaker output to 2pair speakers right?
"since this is a family car and i want my family to have the best" i would use this excuse to my wife later., thanks
It is always the best excuse. =)
Sorry to bother you. Where did you source that new center panel from? I have a 9" Teyes CC3 2k, and tried the trim kit that came with it for 2008-2014 Alphard/Vellfire, but the head unit just falls back from it at the top. I would love the same like you have there. Thanks again!
I don't have the exact link anymore since its been around 2 years plus ago. But here is another link selling the same thing i have. But mine is for a 10 inch player. 9 inches are kinda uncommon here.
shopee.com.my/TOYOTA-ALPHARD-VELLFIRE-ANH20-2008-2014-10''-INCH-casing-android-player-T0-277-i.239678995.10716833732?publish_id=&sp_atk=5ea9e3fe-53b8-44df-be0c-cf08a9f94615&xptdk=5ea9e3fe-53b8-44df-be0c-cf08a9f94615
Thanks for the reply!!@@TCsAnythingGoes
Your Alphard is come with CAN Bus?
Bro where is roof monitor cable, front camera and reverse came cable.
Hi, loved your video. If the car has multiple cameras can that be made to work with android units?
Depends on how the camera is wired. As my car does not have multiple camera so I can't really advice.
If the camera is individually connected to the old player, then it cannot be done. If the cameras are connected to a centralized/hub controller then maybe.
Cause Android players only has one camera input.
So good to see your vedio ~
Thanks a lot~
Hello mate,I recently bought a ekiy t900 head unit for my 2009 Vellfire,same your van,your video helped me a lot to find right cables but having trouble to find speaker cables from original wire loom can you kindly help me with that and already contacted steering wheel wires but all buttons working only one function I’m based in London.😢😢
Hello. If your Vellfire is the same as mine, then your speaker loom is under the passenger seat. Not the head unit loom as it only has a digital out to the amplifier.
You will need to program the steering wheels button on the headunit. Somewhere in the settings, look for steering wheel. Programming is as simple as choosing the function and holding the steering button down for a second or two. Hope this helps.
So it’s mean I have to get the wires from android head unit to amp or just cut the amp wires and reconnect to android player right,but my android player got 4 channels,hellfire got more than 4 channels right,sorry bit confused,can you kindly explain a bit please and You are a star mate thank you
@@Cham.88dis i explained it in the video
So, you have to pull 8 wires from the android to where the amplifier is.
Then from there, connect it to the speaker wires that is there. Amplifier can be removed.
Yes, the android head unit is only 4 channels where as we have 18 speakers (i don't know how many channels are in the amp).
So you just test and see which speaker you want to connect to which channel.
@@TCsAnythingGoes
Thank you mate I’ll try that way 👍👍
Can we restore the auto parking? Is it related to type of steering rack.. Or do the auto parking use another servo to move the steering
I see only one power steering motor in my car. I disabled the auto park feature the moment I change to Android. Even the switch for it have been removed. I find auto park as a gimmick cause ALL the time I tried to use the auto park, I am wasting more time adjusting it. I think most of us will be able to park the car much faster than the auto park.
Thanks.. I guess its ok not have it anyway
How to know n connect the speaker wire from player....if im not mistaken, have pin for speaker wire...
Did you install an amplifier or sunwoofer?
Where can i purchase the centre console casing as i live in the UK
I got mine off Shopee but I am not sure if they ever ship international.
Those I see in Aliexpress seems to be bundled with a player.
TC, I purchased my Tesla Style Android device about a year ago and have it installed in my Alphard 20. The main reason for me making this purchase was to be able to have video in the front as well as the rear with my overhead monitor... The problem is there is no video out on the Android device and I am wondering is there any way possible to be able to get this to work or did I just take a loss... Your help would be greatly appreciated!
That's odd. I owned 4 different android players and all of them have video out. But mine is all 10 inch universal android players and not the tesla style player. Do you still have the link where you purchased yours so I can see what comes with the player.
@@TCsAnythingGoes can you upload a video of your head unit, is the radio working ok ? I have a cheap android player and the radio is terrible, the android auto only connects with usb, I was looking at getting a proper pioneer SPH-EVO950DAB and get a normal double DIN facia, as i think everyone likes the idea of these android players, but they always have issues
@@monkins1010 my radio works fine on this unit. A cheaper unit that I installed in my other car, the radio ain't good. The difference I see is that my Alphard uses one with RDS chip
Hi TC ,
I just purchase my vellfire ANH20.
Same spec like you.
Unfortunately my head unit can’t use to open roof monitor and no sound at all.
I believe my power amp speaker under front seat passenger was problem..
Look like yours amp same like my power amp.
Are you plan to sell ? 😅
my amp have been sitting in storage for almost 2 years already. Not sure if it even works anymore.
why not consider changing to android player? Its cheaper and actually produce better quality sound (if you get the hi-end android player). Only thing i gave up was the auto parking and the parking assist line (the line that turns as I reverse and turn the steering). Both features that I do not find useful.
oh ok2. i prefer to have original spec. now have head unit just plug in to cigarate point. Have 10" monitor. similar as android player. Anyway thanks bro. now i know how to dismantle every part of my vellfire .@@TCsAnythingGoes
Hello Hi ! May u teach me how to take out the driver seat & front passenger seat.. pleaseee.. 😅😊
here ya go my friend
ua-cam.com/video/uwfSWvKsLec/v-deo.html
Did you have any reliability issues since installing this head unit TC?
after two years, i can finally reply and say that till date..... no issues with this head unit and its still kicking ass.
@@TCsAnythingGoes Superb 👍
Where can buy the cable?
Hello again the one i was able to buy has a DSP amp but only 4 outlets for speakers. FR, FL, RR and RL wondering how you wired your two large door speakers in and the centre on dash speaker please? hope you can help as think your car is same as mine.
regards steve in uk london
center dash speaker goes to the FR line.
door speakers..... front door or rear doors?
You can follow the color code at the original amp. it has 4 sets of color only which makes me believe its a 4 channel amp as well.
@@TCsAnythingGoes hi TC the front door speakers I thought because they are big they are subwoofers? BUT NOT SURE. when looked at your video between 13 and 15 mins you didn`t say how to connect all of the speakers and would really help me out to know what you did do please?
thank you again steve
The only subwoofers were the one under the driver seat. I basically just twist all the wires together according to each channel and polarity then connect it to the red/black wire i pulled from the player.
@@TCsAnythingGoes Ok thank you TC. Can you please send link for the Antenna Adaptor harness/cable please. looked everywhere but cant seem to find it. thank you. steve
Here ya go. Sorry for the late reply. UA-cam doesn't sent me notifications for replies on top of replies.
shopee.com.my/CRIMEFIGHTER-%F0%9F%92%A5Ready-Stock%F0%9F%92%A5-MALE-RADIO-ANTENNA-HARNESS-SOCKET-FOR-ALL-TOYOTA-CAR-i.43715877.1761124418
Hi. I am about to buy a Vellfire GGH25 and it comes with Japanese language. Some people told me that it uses the same Screen etc. like the ANH20. Do you know about it? I really want to replace it so that I can actually understand the menu and settings and use waze, spotify, radio etc. I do not need the navigation system which comes with the car. Just the standard functions of this car. I will be in Malaysia again around June/July and I hope to find a solution at there which I could bring back home to get it done.
even if it uses a different screen, i will say RIP it out and install an Android player. much more connectivity and the screen is better too if you get a decent android player.
@@TCsAnythingGoes Do you have any loss of function compared to the original screens after replacing it? Like settings menu, speakers etc?
@@aijesa8185 my original screen was kinda junky and it was all in Japanese hence i did not explore much but I do know i lost the below functions
- auto parking assist
- reverse line (the one that turns with your steering when you reverse)
Both are functions that I can live without.
@@TCsAnythingGoes Ok sure. Parking assist I also don´t need, because I either know how to park or not. Reverse line would be nice, but I could easily install a new camera and get it to work I guess. Aircon, lights, music etc works fine? Thanks for the information so far
Hi..how do you connect the reverse factory cam to the android?
I bought the plug n play reverse cam socket 4pin but still cant activate the reverse cam.hope you got video.
I used a wireless transmitter to connect my reverse camera.
ua-cam.com/video/OJY9vSxaQaI/v-deo.html
Only applicable cause I changed to an AHD camera which is much better quality that the original.
Hi! U need voltageconverter. Original cam is running with 6V. Thats the problem.
Thanks for thje video. Can you tell me where to get the frame that fits the android player? I have the same android player and right now it is jutting out. ugly!
I can't find the exact link where I purchased it from since its been almost 2 years already. But the link below is the same thing and I am not sure if they ship outside Malaysia.
shopee.com.my/Big-Screen-Casing-Android-10-inch-Toyota-Alphard-Vellfire-ANH20-2008-2014-(without-Socket)-i.115959142.7147888983?sp_atk=cf741ab0-2cfa-453e-a488-d38aac223621&xptdk=cf741ab0-2cfa-453e-a488-d38aac223621
@@TCsAnythingGoes Thanks, that almost works...except my Alphard is a left hand drive... :(
@@TCsAnythingGoes Another question, if I may hijack this discussion...is there a 5v source near central light and automatic door controls that I can use to power my dashcam so I don't have to route a wire through the dashboard and have it take up a USB slot. Thanks!!!
@@renecanlas8617 There isn't. What I did was i extended a 12v to the back of the glovebox and connect it to a 12v socket that I purchased aftermarket. Then after that I just connect those 12v socket to usb and be done with it.
Can u connect the Android player to roof monitor?
The original roof monitor can connect the Android player or not?
I connected my Android player to a new 17 inch roof monitor. Ran new cables to the roof monitor. Cause my original roof monitor..... the lcd is gone (probably due to over exposure to heat.) But technically should be do-able if you can identify which cable is the video input for the roof monitor. Just need to splice it and add on an RCA connector.
Hello fantastic thank you for this. we live uk london. can you please tell me the model number of the unit you have installed please as think we have the same model mpv as you. thank you steve
So good to hear that my video even reached London viewers. Here is the link to the player i purchased but i am not sure if they ship internationally.
shopee.com.my/2021-TOP-MODEL-6GB-RAM-128GB-MEMORY-SKY-NAVI-CAR-ANDROID-PLAYER-i.286132689.6962168591
@@TCsAnythingGoes Thank you so much is that where you got the 10" casing from as well please?
I would like to send pic to you that shows where the passenger heated seat switch is on my mpv as I think you mentioned in your video, you found the switch inside your consul my email is stevencarresq@gmail.com if you want me to send you a pic of location drop me a mail and I will send pic. Tip for you. Just found out leave mirror selection button in middle position and the mirrors don`t auto tilt. thanks again
I got the casing from here - shopee.com.my/TOYOTA-ALPHARD-ANH20-2008-2014-10-ANDROID-CASING-(FREE-PLUG-PLAY-CABLE)-i.41956296.3641867283
Thanks for your offer, I believe the passenger heated seat switch is supposed to be located at the center console next to the 12v plug. But since I am having the cooler box console, so the switch was thrown and forgotten inside the dashboard. I extended the wire and placed the switch next to the driver side heated seat switch now.
Hi bro, player no amp can support 18 speaket??
Yeap, all speakers are working fine.
@@TCsAnythingGoesты подключил 4 канала. Работают ли при таком подключении динамики на потолке? И работают ли все остальные динамики ? На панели слева и справа?
@@romandashko426 yes, all my speakers works. But its only running on 4 channels
@@TCsAnythingGoesдинамики, которые на потолке над третьим рядом сидений к какому каналу подключены? К заднему левому (черный+ жёлтый синей фишки) и заднему правому (красный +серый синей фишки). А коричневая фишка не знаешь для чего?
Hello bro.. nak tanya after install android player ni full speaker function kah?
yeap. ikutkan cara i buat wiring dia, semua speaker function. Woofer pun function. Sound lebih mantap dari player asal. Amp kena keluarkan.
Ada perlu tambah apa apa part kah boss.. Sebab saya pasang soundstream player.. Tp baru perasan speaker depan saja yg bunyi.. Bahagian belakang tiada sound
Siapa yg pasangkan? kalau kedai yg pasang, suruh dia orang check balik wiring dia.
Lagi kena check setting kat player, mungkin fader dia set ke depan saja.
I direct connect speaker output dari player terus ke speaker je. Tak tambah apa apa. I keluarkan amp dia ada la.
How can I get in touch with you...
add me up on FB. Seach for "TC's AnythingGoes Channel"
How to Stering control
Wiring portion I have explained in the video (3 wires)
For the programming portion, its pretty straight forward in the Android settings.