3210YB 12 100 Micro diaphragm pump working demo video

Поділитися
Вставка
  • Опубліковано 12 жов 2024
  • This is a short video of micro diaphragm pump device 3210YD-12-100W. In this video, we adopted two power supplies: Power supply A is a powerful enough 12VDC power supply, while Power supply B is a 12VDC power supply which is not powerful enough to power the pump.
    Note that rated power consumption of this pump model is 100W; so if users want to power the pump with a AC/DC power adapter, the requirement of output capacity of power adapter should be 12V, at least 8A. If less, it could be not powerful enough.
    If we use Power supply B to power the pump, we will feel that motor of pump starts & stop repeatedly and cannot normally work. This is because that power supply cannot provide enough power to this pump.
    Instead, if pump is powered by Power supply B, we can see that pump works normally, in continuous rotating status. At this moment, pump can normally pump water.
    In fact, it's also recommended that users can change to use a 12V DC battery to power the pump, when pump cannot normally work under power adapter, to verify whether it's issue of weakness of the power adapter, or it's issue of pump itself.

КОМЕНТАРІ • 27

  • @VijayaKumar-pr2rj
    @VijayaKumar-pr2rj 6 років тому

    How did the video show the working? It would have been clear if an inlet supply of water is given and then the output checked.

  • @mga1858
    @mga1858 5 років тому

    Lily Yan: Who in the whole-hell uploads a video *WITHOUT A DEMONSTRATION* of functionality??!

    • @lilyyan5645
      @lilyyan5645  5 років тому +1

      My friend, with all due respect, please do not use word like 'hell'. This is my recommendation.

    • @lilyyan5645
      @lilyyan5645  5 років тому

      Regarding this short video, it was just recorded for a previous user, who used a less-powerful AC/DC power adapter to power this pump, so it cannot run normally. Just for this purpose.

    • @lilyyan5645
      @lilyyan5645  5 років тому

      As to its real spraying performance, currently I temporarily don't have demo video to share, at this moment. Yet, some descriptions on the notes of video may show some info that is useful. For sure, I also suppose that it's a bit pity that video does't show the performance of pump. I agree with this point.

  • @212025510
    @212025510 Рік тому

    How loud is this type of a pump?

    • @lilyyan5645
      @lilyyan5645  Рік тому

      The noise of this type of pump is deemed as loud, since it runs on brushed motor. I didn't measure the exact dB.

  • @محلاتالنسرالذهبي0097

    Yes there is a positive and negative cable, but there is a third cable at the top if you have Watts or Emails

  • @Niopmahcheep
    @Niopmahcheep 5 років тому

    How much ampere from the power supply unit supplied to the water pump?

  • @dwaynestinson
    @dwaynestinson 7 років тому

    has anyone tested the actual psi and amp draw of this unit using a 12volt battery source?

  • @SDP17
    @SDP17 7 років тому

    what's the output of adapter should have? 12volt output & how much Amp is need for this pump.

    • @lilyyan5645
      @lilyyan5645  7 років тому

      12VDC, 9A or 10A should be OK.

    • @SDP17
      @SDP17 7 років тому

      Lily Yan are those for laptops adapter?

    • @lilyyan5645
      @lilyyan5645  7 років тому

      I think that laptop adapter is not suitable to power this pump. As far as I know, it should be with output capacity of appr. 19VDC.
      Instead, matching power adapter for this pump is recommended to be with output capacity of 12VDC, 9A (more or less)

    • @585DnA
      @585DnA 5 років тому

      @@lilyyan5645 p

    • @herdinanriza9153
      @herdinanriza9153 4 роки тому

      @@lilyyan5645 Hello, i want to ask this propump can used with 80watt adaptor? Because i have this product and i use 80watt adaptor. When i use continuesly that's make the cable going very hot and burning the switch controller, but i use with spare time thats not make hot. Sorry bad english.

  • @محلاتالنسرالذهبي0097

    I have the same pump. There are two wires for the battery and one wire that I did not know

    • @lilyyan5645
      @lilyyan5645  7 років тому +1

      If your pump is the same, there only exist two cables: Positive and Negative. No 3rd cable exists.

    • @محلاتالنسرالذهبي0097
      @محلاتالنسرالذهبي0097 7 років тому

      Yes there is a positive and negative cable, but there is a third cable at the top if you have Watts or Emails

    • @lilyyan5645
      @lilyyan5645  7 років тому

      In our pump product, we don't have the 3rd cable.
      By the way, it's my sincere recommendation that you'd better directly contact the seller who provided you the pump; after all, it's the pump of his/hers and he/she must know more in detail on the pump in your hands.

  • @محلاتالنسرالذهبي0097

    Can you give me an email

    • @lilyyan5645
      @lilyyan5645  7 років тому

      OK. alexanderwu110@gmail.com

    • @RajKumar-cf5pm
      @RajKumar-cf5pm 6 років тому

      محلات النسر الذهبي 0097450112213

  • @luiscenturion8815
    @luiscenturion8815 3 роки тому

    Very noisy

    • @lilyyan5645
      @lilyyan5645  3 роки тому

      Yes, you are correct, noisy is deemed as one typical working characteristics of a diaphragm pump product.
      Instead, brushless DC pump products will work with low noise, yet, they cannot be self-priming.
      Different types, different performances.
      For example,. ua-cam.com/video/ZxmVLLxj2tE/v-deo.html
      or,
      ua-cam.com/video/mh_RXF8sKsI/v-deo.html