Changing the bolt pattern on my 92 f150 from 5x5,5 to 5x4,5 so can run a better wheel selection #bolt #f150 #wheels #redring #shoplife #tools #racetrack #helpful
I have done this before by hand with a hand drill. All i did was buy a wheel spacer with the bolt pattern i wanted and put a hub centric spacer ring to make the spacer fit perfect over the hub. Then center punched all the holes. Then drilled and tapped them. And bought wheel bolts instead of studs. Super easy. Diy
@@desifrazier121 I’m not sure I had a few people ask for other sizes try googling the name on the tool I bought it about 8 years ago Rottenleonard.com think I found him on jalopy page
Yes it you could it just needs to have a way for the stud to sit straight with out doing something the stud will always be pulling at a angle hope that helps
@@thedelawareranch2379 where do I find it I have looked everywhere and I don't even know what the tool called and my truck is 4 wheel drive that want matter and I been doing some reading and some people say you can use the 2 peace wheel adapters for one of those tools to my truck a 6 lug
@@johnhammond2390 I found it on the jalopy form it’s made by a guy Rottenleonard .com That’s what I’m the tool I have had several people ask I’m not sure if he’s still making them or not this one let you go from 5x5 to smaller ford 5x5.4
@@thedelawareranch2379 yeah mines 5x135 and I want to got 6x135 I've googled and I've talk to some people I know they have truck like mine and have switched the whole thing to 6 lug pattern and I guy I work with told my wheel adapters of the bolt pattern I want and drill the holeyfor it
I have done this before by hand with a hand drill. All i did was buy a wheel spacer with the bolt pattern i wanted and put a hub centric spacer ring to make the spacer fit perfect over the hub. Then center punched all the holes. Then drilled and tapped them. And bought wheel bolts instead of studs. Super easy. Diy
I want to do the opposite 5x4.5 to 5x5.5 to put f150 wheels on a ranger good video
To get a flat surface on the backside, I use a counterbore with an alignment pin and just clean up the surface. Works best with a drill press.
Thanks for sharing this.
Been thinking about buying one. Seems to work very good. Thanks again you got my sub. Take it easy👍
I just tap the holes and use screw in studs with thread lock. Work's perfect.
That was a thought i had at one point as well
I love what you did on the rotor I want to change a 5x4.75 to a 5x5 can I buy that tool for it
@@desifrazier121 I’m not sure I had a few people ask for other sizes try googling the name on the tool I bought it about 8 years ago Rottenleonard.com think I found him on jalopy page
I know you got this a while back... do you remember who u bought this from?
Hey im in Delaware i need you to do mines!!!!
I’m down the beach
Where did u get that tool from
Could you just grind a small bevel on the stud seating surface where the radius on the rotor interferes with it going all the way down?
Yes it you could it just needs to have a way for the stud to sit straight with out doing something the stud will always be pulling at a angle hope that helps
I just want to know. Is that yellow drill still rocking back and forward to this day?
It sure is don’t ask how lol
Where can I buy this tool ?
Any video on rear
who makes the wheels?
Summit racing wheels drag thrust
Can I do this to my 2002 Ford F-150 5.4 Triton XLT I wanna change it form 5x135 to 6x135 and is this work for mine
@@johnhammond2390 if you can find one in that size yes
@@thedelawareranch2379 where do I find it I have looked everywhere and I don't even know what the tool called and my truck is 4 wheel drive that want matter and I been doing some reading and some people say you can use the 2 peace wheel adapters for one of those tools to my truck a 6 lug
@@johnhammond2390 I found it on the jalopy form it’s made by a guy Rottenleonard .com
That’s what I’m the tool I have had several people ask I’m not sure if he’s still making them or not this one let you go from 5x5 to smaller ford 5x5.4
@@thedelawareranch2379 yeah mines 5x135 and I want to got 6x135 I've googled and I've talk to some people I know they have truck like mine and have switched the whole thing to 6 lug pattern and I guy I work with told my wheel adapters of the bolt pattern I want and drill the holeyfor it
@@johnhammond2390 I did just google that name comes up to a Rotten Leonard’s jalopy shop in Idaho I have had this tool for 8 years or so now
amazing video man 🤌 this is a great video that explains it and shows it well
what is the name of that tole
Rottenleoard was the name on the tool
And then wheels don’t look like 9 years old men wheels