Yd100 Screamer!
Вставка
- Опубліковано 14 жов 2024
- Testing a br6hs plug on the yd100. I love this build she pulls up any hill I can find, more than happy with this build. Has a Af80 rod, 15.5mm thick crank webs with some 8272 marine jb weld in the case transfers but flowed to enter the cylinder transfers. Jb weld is only there to add case pressure because I have such thin crank webs.
Man you got some beautiful weather down there. Love the palm tree bud. Your build sounds and performs spot on, great job.
Thank you JM. Gotta love beautiful Southern California🙌🏼. I agree, Im impressed with how it performs for using a $10 “warrier” dremel
@@justanothermotorizedbikech5138 Nice. Yep, making cheap shit, with cheap shit and going fast is the way to go😎
@@justanothermotorizedbikech5138another cheap hack is cutting some inner tube make an extra gas tank gasket stops fuel spilling
Super nice ride along ny friend! The sunset ride was awesome! Now I know why your bikes all idle so nice is because Your at sea level. So much easier to tune in may opinion. 👍
@@DirectCurrent4u Thanks buddy. If you have idle problems change your crank seals out on both sides then apply some RTV gasket maker on top of the seals no one will over see it and it holds very good. A seals is behind your magneto and one behind your small bevel gear
@@justanothermotorizedbikech5138 I have done that on all my motors. That is one thing You don't see many people do or talk about But it's really important because they like to leak there if they can for sure. I like to use the brown ones seem to last muck longer then the black ones. I am at 7500 ft so jetting is always a little time consuming to get them dialed in. Thanks for the reply my friend! 👍
@@DirectCurrent4u 😎😎nice. Wow 7000+ft😲😲
Great ride locknuts would be a good choice on the gas tank but you was definitely keeping up with traffic 🚦
Yessir i miss that one I had just forgot to tighten it didn’t want to go back to have to edit it out the video next time for sure
Love the smell and sound of 2-stroke in the morning. My 1st three motorcycles over 40 years ago were all Yamaha RD's. This would be awesome on my '73 Schwinn Varsity 10 speed but, I'm thinking might be too heavy for the skinny tire wheels.
I agree. The simplicity is just amazing! I’m sure the spokes on the '73 will hold for low power. When you have time up the Honda 50cc in the 1960’s that thing was a screamer on thin wheels and regular bicycle rim brake’s. I say go for it!!
Thanks for the ride along brother she screams you need lights for your night Riding safer for you driver's cant say they didn't see you other than that ride safe i subscribed see your next video
I agree I’ve hit some few things now in the road from no light😭😭. I’ll have one on next video for sure
@@justanothermotorizedbikech5138 I was just talking from experience I almost got hit by a car
That's yd 100 is running very nice 👍 look like it pulls hard
Thanks man😎😎. She wants a bigger carb for sure at full throttle motor is lean
Thanks for the ride along bud yd sounds good
Man I could ride it forever it’s too fun
Thanks for coming alone😎💪🏼
I like the long ride videos bro and the bike sounds awesome 💥💥🦾
Noted!! Thank you brotha😎😎
That bike sounds and runs really good. It doesnt wanna die at idle, like a lot of folks videos. I am just in my research phase, watchin a lot of videos. Lol. Im collecting parts for my first moto build, and probably will not have everything I need until about Spring.🙄 It should be really nice, as long as I put it all together well😬. Ha. -Hey man, YD 100s are one of those 1 piece/non-removable head engines, right?
Thank you Marcus I appreciate it. I did a few mods to make it run like this. I sanded the case down 1.5mm then added jbweld in the case transfers (I don’t recommend the jbweld but it does work. Yes the yd100 are single piece but so are some 66cc motors you have to measure the piston if it’s 47mm it’s a regular 66cc, if 50mm piston it’s a yd100
@justanothermotorizedbikech5138 Thanks for the info. I've been wondering if it's possible to cut the head off of a YD 100, and then bolt a better one onto there!?
@@marcusprince3999 yes it very possible but you do change the squish valve which will change how the motor runs, the flow of the mixture when ignited is very important in how a 2 stroke performs. If not right the head and top of piston will become too hot or too cold for the motor to function properly. You want the squish band to be 70% of the bores diameter with a 25 degree roof angle
@@justanothermotorizedbikech5138 That is some very important information there! I appreciate your help!!
Thanks for the ride along ride safe
No problem brotha😎🚀🚀
❤ Happy to subscribe and much love to you and your family.
I appreciate it😎
Sounds great it seems like it's running real fast are those yd 100 eng worth?...how much is engine cost..? mods have you done to this bike ?
This one has a ported exhaust somewhere around 180-190 exhaust, 130 transfers. They are worth it but you can always get a bad motor/kit. They run around 130-$175 per kit just depends where you get them. If you can find the owner on Facebook you can buy directly from the guy who owns them and for cheaper with no issues. The pipe was $90, carb was $40, pilot and main jets
$25, stand along cdi (not really needed) $40. The case did have some JB weld in the case transfers to add crank case pressure. The jb weld makes the motor draw more from the jets
Man, put it on a bike with shocks. I’m getting arthritis just watching this. Sweet build❤
😝😝😝👌🏼
My bike is steel framed but it doesn't shake to bad
I put a 30cc 2 cycle on a 1979 26-inch Schwinn 15-speed. I had to cut some spacers and use longer high-tensile All Thread to mount the motor. I painted it Caterpillar Yellow and gave it mountain bike handlebars, it was really cool looking. I know it got up around 40 mph or a little faster.
I rode it around for a year and had fun then some rich kid who liked working on things bought it from me. If I build another I think I would choose a bike with bigger tires. That is a lot of extra weight on skinny road bike tires. Get some lights! LOL
The first thing that failed me was the chain slack adjuster idler wheel I found something else in at the Ace hardware store bin that worked better. I found out Quick Links for the chain are hard to find an odd chain size when I found some I bought extras.
What motor? Sounds like fun. That’s pretty fast for a 30cc😎
@@troytaylor1913 build another!!! I’m sure lots of people will enjoy seeing it
@@troytaylor1913 yeah those tensioner wheel bearing are not the best at all
Needs a little tunning but sounds good. Thanks for the ride.
I agree she’s not 100% there. Needle clip is maxed out 4/4😝 she needs a bigger jet or better carb. Idk if you can hear but on the top end when I pull the clutch in shes definitely lean. Thanks for coming alone Leonard
Nice Bike a mans frame. Not like todays Sissy frames
Thank you!! Definitely one of the better ones🚲👌🏼