more reliable. and once you put lifts on them, the toyota has better approach and departure angles, and there's way more aftermarket products (in the US at least) for toyotas rather than nissan. But pathies are no slouches. Just not as good as a toyota that will run for 700k miles
@SAVEtheRHINO Buy the body lift, much cheaper than the suspension. If not you could make some spacers for the rear springs I guess. Almost like a "leveling kit"
i also have the same model. is that the original rear bumper that came with it? if not can you please let me know ware you got it as im in need of one.
@alexaugustine302 I got lucky and found it in the local classifieds for an odd price of $27 around 4 years back. Only one I have ever seen on the adds. Check your local adds.
suzuki230 and since I have the 2” lift spacers I’m trying to figure out what tires should I put on, I’m keeping the stock rims I’m just going to add the 2” lift spacers, the Algerians , and paint the wheels black
@@suzuki230 aaaaaaaaa you answered me! 1st thank you very much 2nd ok see the site 3° upload more videos of your nissan phatfinder it is a beautiful car but I don't know anything about it
I think it's XE and SE. XE is base model, SE is the more fully loaded model, I.E power windows, doors, mirros etc. Although, the XE can be fully loaded as well.
@aaron111382 I used a 3 inch Body Lift and cranked the torsion bars. It was about $130 for the kit and about 6 hours for the installation if you dont have a lot of jacks, but it was an easy install. Best place is at 4x4parts.com
@FH415 Thanks man, good to hear, I will have a custom light bar here soon.
Why do people say that Toyota 4Runner is better for offroad, I drove both stock, and Pathfinder felt better.
more reliable. and once you put lifts on them, the toyota has better approach and departure angles, and there's way more aftermarket products (in the US at least) for toyotas rather than nissan. But pathies are no slouches. Just not as good as a toyota that will run for 700k miles
Four runner has stronger transmission and you don't want a Pathy to find you out in the mountains. They are right.
@norcalhempapers I replaced the shocks and all the front end stuff except the torsion bars, waiting to buy a complete lift.
Really nice truck
awfully nice of your buddy to do all that running around. hahaha
33x12.5R15 superswampers tsl are the tires, wheels are Ultra brand, 15 inch spay painted black
That ir a damn cool pathfinder
@drumgod54KID I just put the SL on a few weeks ago, it just takes so long to go through and edit the videos.. but thanks!
@SAVEtheRHINO Buy the body lift, much cheaper than the suspension. If not you could make some spacers for the rear springs I guess. Almost like a "leveling kit"
what did you use to lift your finder? ive been trying to find a cheap way to get mine some ground clearance
What lift kit did you use and how much was it?
what size and model are the wheels and tires? they look really awesome so i wanna know!!
@davidtellez89 Thanks! Just wait till you guys see it with the supercharger and SAS on it.
What's your plan for a super charger? I've been thinking of swapping the s/c vg33 top end on mine but I haven't seen or heard of anyone else doing it.
Sounds like this guy is in 4lo when he should be in 4hi
Absolutely agree and it's a Terrano. I have the exact model in Australia. Cheers.
True
nice pathfinder
can u tell me the build on ur pathfinder?
i also have the same model. is that the original rear bumper that came with it? if not can you please let me know ware you got it as im in need of one.
couls someone tell me the diff between the EX and the SE? (92)
@alexaugustine302 I got lucky and found it in the local classifieds for an odd price of $27 around 4 years back. Only one I have ever seen on the adds. Check your local adds.
I have an 88 pathfinder and i cant find any brush guards or racks for it where did you get yours??
I have a Diesel truck, a Dodge Ram 2500 Cummins Turbo Diesel. They never sold the Terrono here or I would have for sure! :)
Why does it sound like the fan is going full tilt on the pathfinder... Probably not good
Most likely in low range when they should be in hi range
@norcalhempapers yeah you can. I had 235/75/r15s I ran with the lift for a while. Didn't look too bad but looks much better with 33's
suzuki230 how many inches did you get your lift ?
Because I have a 2” spacers lift for my pathfinder, it’s the same color as yours just not the hard body mines a 96
suzuki230 and since I have the 2” lift spacers I’m trying to figure out what tires should I put on, I’m keeping the stock rims I’m just going to add the 2” lift spacers, the Algerians , and paint the wheels black
nice pathy
Whats the size of yout tyres
OK. I see in an earlier post you mention you are using Ultra wheels. Which version/name?
I couldn't tell ya. Sold the wheels a long time ago. Just have some old Chevy wheels on it now.
All that money in that thing and you didn't even get a full size spare? That was my first upgrade for my Pathfinder
My dad gave me one of these. and I love this car. but the car is neglected. Do you think you could make a video explaining things about the car?
What would you like to know? NPORA is a resourceful site that has a lot of information
@@suzuki230
aaaaaaaaa you answered me!
1st thank you very much
2nd ok see the site
3° upload more videos of your nissan phatfinder it is a beautiful car but I don't know anything about it
I almost bought one but the frame was rotted out now I have a jeep grand cherokee woulda much rather have a pathfinder like yours
I think it's XE and SE. XE is base model, SE is the more fully loaded model, I.E power windows, doors, mirros etc. Although, the XE can be fully loaded as well.
And ST
@aaron111382
I used a 3 inch Body Lift and cranked the torsion bars. It was about $130 for the kit and about 6 hours for the installation if you dont have a lot of jacks, but it was an easy install. Best place is at 4x4parts.com
suzuki230 do u have a video of the lift and install
That's a Terrano mate. I've got the same model. Perth Australia.
@suzuki230 No shit your lucky ill check mine i want some so bad...
cringiest thing was watching them pin it through the water.
Thats how you end up hydrolocked.
You forgot to move the camera, so you could not see anything!
get to of roading I do more at the base of my drive way
I didn't see any real action here i could of done all this with my front wheel drive car
@distroy90 yeah and you can shut the hell up. If you dont like it, then dont watch it.
Moms jeep
2:10 and that is how you flood your engine, hydrolock it and split a block.
hold your phone more steadily bro
WTF
Get a REAL one! Range Rover is ALOT better then that crap :)
Al 357 And you know anything about my economy? Fyi i have had two RR and a Discovery! Donkey!
Where’s it at now?