I started with a Taurus 2 saw twenty years ago; at that time users were advised ONLY to cut at a 45 degree angle (forwards or backwards) - now I see you cutting at all angles but that. Of course the design has obviously been improved, but I want my saw to last - comments?
Looks like a great tool to have in one's collection. Love the idea of being able to come into the store and use it to test it out! Thanks for your excellent videos, Delphi!
Hi Gillon, the Taurus Ring Saw does not offer enough throat depth to be able to pass the bottle through as you make the cut. Saws like the Gryphon c-40 Bandsaw or the Precision 2000 Bandsaw would be ideal for cutting bottles.
The saw is almost completely assembled in the box. Here is a video from our website from Taurus about how to set up the saw. www.delphiglass.com/video/Glass-Tools/how-to-set-up-the-taurus-3-ring-saw
The saw makes cuts with a diamond abrasive blade, which can cause some fine chipping along the cut. Some styles of glass are more prone to chipping than others - so you may notice some variance in the finished edge depending upon the glass. If you wish to minimize chipping and get the smoothest possible edge there are a few things you can do. 1. Use a “fine” blade. The Taurus 3 Dichroic Blade features a thinner profile and finer diamond grit to take away less material and give a smoother finish to each cut. This does mean that the blade is more delicate and may not have the same longevity as a standard blade. 2. Make sure that you have clean, cool water in the saw reservoir every time you use your saw to keep the blade flushed and the blade and glass surface cool. This will help keep the diamond coating in the best condition, which will help minimize chipping and give you the best lifespan for your blade. 3. Reduce your cutting speed. The saw runs at a set speed, but often users apply a fair amount of pressure to the glass as they feed it into the blade to maximize how quickly the material is ground/cut away. This can increase chipping and increases the risk of damaging your blade. Guide the glass in the appropriate direction to make your cut, but apply the minimum pressure needed to guide the glass. This will allow the blade to remove the material cleanly. Hope this helps.
The Taurus 3 saw is suitable for solid materials up to ¾” thick. The saw has the following MOHS rating for different materials: Slate has a MOHS rating of approximately 3-4 Marble has a MOHS rating of approximately 3-4 Glass has a MOHS rating of approximately 8 Diamond has a MOHS rating of 10 Based on these hardness rating it is reasonable to use this saw with a diamond blade to cut natural slate. The material may be more prone to flaking due to the properties of the rock.
Hello Cynthia. No, I do not have experience with cutting stone however I do know that some of the saws do have various blades. This saw has what is called a mega blade kit #57004 that cuts dense materials up to 1/4". So if the stone fits that criteria it would be just like cutting glass but you would want to go slowly.
Wow, do you have access to petkowsky stone? My mom feel in love with a piece I brought home from Michigan, I'd like to get a few pieces. Johnson173@msn.com
The Taurus 3 Ring Saw is available on our website: www.delphiglass.com/glass-tools/ring-saws/taurus-3-ring-saw. We ship all across America and around the world.
She isn't using the shield provided with the tool. Also, the fact we can hear her she's def not using a mask. Aren't glass particles flying about? Isn't it dangerous?
It is very kind of you to offer to let others use it. I have one on the way and I won’t even let anyone touch it with one finger ☺️
LOL! Don't we all know the feeling? !!!
I started with a Taurus 2 saw twenty years ago; at that time users were advised ONLY to cut at a 45 degree angle (forwards or backwards) - now I see you cutting at all angles but that. Of course the design has obviously been improved, but I want my saw to last - comments?
If I cut with this would I still need to use a grinder to smooth the edges? Or are the edges smooth when you take the glass from the machine?
Great, question. The great thing about this saw is it does grind as it cuts. No need to use a grinder.
Looks like a great tool to have in one's collection. Love the idea of being able to come into the store and use it to test it out! Thanks for your excellent videos, Delphi!
Would this saw cut a 3/8 inch piece of glass tubing (about 3" long) in half (Lengthwise), ending up with 2 C sections?
can i use it for cement samples of thickness 0.6 inch?
Hi I'm thinking about getting a Taurus ring saw for my stained glass work. Can I also cut bottled with this or would I need the Gryphin band saw?
Hi Gillon, the Taurus Ring Saw does not offer enough throat depth to be able to pass the bottle through as you make the cut. Saws like the Gryphon c-40 Bandsaw or the Precision 2000 Bandsaw would be ideal for cutting bottles.
When using the Mega blade does one have to remove the stabilizing foot?
Any tips on putting it together? Having a heck of a time
The saw is almost completely assembled in the box. Here is a video from our website from Taurus about how to set up the saw. www.delphiglass.com/video/Glass-Tools/how-to-set-up-the-taurus-3-ring-saw
Hello. Is there any chipping at the cut? If so, what is your recommendation to reduce chipping - slower speed, more water???
The saw makes cuts with a diamond abrasive blade, which can cause some fine chipping along the cut. Some styles of glass are more prone to chipping than others - so you may notice some variance in the finished edge depending upon the glass.
If you wish to minimize chipping and get the smoothest possible edge there are a few things you can do.
1. Use a “fine” blade. The Taurus 3 Dichroic Blade features a thinner profile and finer diamond grit to take away less material and give a smoother finish to each cut. This does mean that the blade is more delicate and may not have the same longevity as a standard blade.
2. Make sure that you have clean, cool water in the saw reservoir every time you use your saw to keep the blade flushed and the blade and glass surface cool. This will help keep the diamond coating in the best condition, which will help minimize chipping and give you the best lifespan for your blade.
3. Reduce your cutting speed. The saw runs at a set speed, but often users apply a fair amount of pressure to the glass as they feed it into the blade to maximize how quickly the material is ground/cut away. This can increase chipping and increases the risk of damaging your blade. Guide the glass in the appropriate direction to make your cut, but apply the minimum pressure needed to guide the glass. This will allow the blade to remove the material cleanly.
Hope this helps.
Your answer is complete and addresses all my concerns - thanks.
@@Thelonious2Monk I always put some icecubes in the water reservoir when using the saw... Helps for #2 :)
@@DelphiGlass I always put some icecubes in the water reservoir when using the saw... Helps for #2 :)
Interesting. Thanks for the tip/
Hi i am looking to get the taurus 3, i work with natural slate, can you tell me what thickness can you puss through the saw. Dermot
The Taurus 3 saw is suitable for solid materials up to ¾” thick. The saw has the following MOHS rating for different materials:
Slate has a MOHS rating of approximately 3-4
Marble has a MOHS rating of approximately 3-4
Glass has a MOHS rating of approximately 8
Diamond has a MOHS rating of 10
Based on these hardness rating it is reasonable to use this saw with a diamond blade to cut natural slate. The material may be more prone to flaking due to the properties of the rock.
thank you , that was great information, have a good day.
Will it cut stone?
What do you use to trace the pattern onto the glass? I’m using a black sharpie and it washes off & now the sharpie is not even working. Thanks!
try "science markers"
I would love to have one . I’m on low encome .How much do they cost
The Taurus 3 is currently on sale here is the link to it on our website. www.delphiglass.com/glass-tools/ring-saws/taurus-3-ring-saw
I have had this saw suggested for cutting stone, like petosky. Do you have any experience with that?
Hello Cynthia. No, I do not have experience with cutting stone however I do know that some of the saws do have various blades. This saw has what is called a mega blade kit #57004 that cuts dense materials up to 1/4". So if the stone fits that criteria it would be just like cutting glass but you would want to go slowly.
Wow, do you have access to petkowsky stone? My mom feel in love with a piece I brought home from Michigan, I'd like to get a few pieces. Johnson173@msn.com
@@dianejohnson1946 I have a bunch
How much the machine
Where can I get the backsplash I see behind this machine?
Where can I bye this machine?
The Taurus 3 Ring Saw is available on our website: www.delphiglass.com/glass-tools/ring-saws/taurus-3-ring-saw. We ship all across America and around the world.
Is it possible to use it with ceramics tiles ?
Yes
how often does the belt need replacing?
I started changing directions and the blade starting making a very odd sound.. I think it broke
Why a ring saw vs a bandsaw?
HUGE thank you!!!
She isn't using the shield provided with the tool.
Also, the fact we can hear her she's def not using a mask.
Aren't glass particles flying about? Isn't it dangerous?
I'm trying to sell one if anybody is interested 👀 🙂
Ys i m interested pls write ur email id