This is what we need in order to learn anything no silly 3 minutes intro no trailers no music no unnecesary speech no begging of comments and subscription and bell button no low quality voice recorded in an echoing room no sponsors no advertisings I watched all of the four videos in this channel and enjoyed every minute in them while lively applying the instructions I am really sad that there are no more videos in the channel and I have to visit other channels to learn more
Seriously, I’ve watched a multitude of FreeCad tutorial videos but I just couldn’t absorb the contents or the speed it was given. I was discouraged and I was just about to stop trying to learn it, till I finally found your videos. The ease, the clarity… You have such a way to share your knowledge. I would add more positive comments but in a nutshell, please, please Jeff, don’t stop. I can’t wait to learn more.
I have seen many Freecad tutorials online. I just learnt 4 new things in one 8 minute video from you! Please continue with these. I hardly ever comment but you are fantastic in your explanations. Clear, Concise and to the point.
Jeff I need more. Following along with your videos while learning to use Ondsel ES which operates off of FreeCAD and you make this so easy to understand. We need more Jeff.
I was about to stop using FreeCAD as the tutorials i used until now, didn't help as much as i would like. Your tutorials are really well made, not too fast and not too slow so i become bored. Great work
Hey Jeff, just wanted to add to the multitude of other comments that these videos were very helpful and concise. I hope you are doing well and I hope to see more instructional videos from you. Thanks.
Just in the 4 videos I've learned more then all the others I've watched combined. I think now I should be able to create my part I've been getting so frustrated in designing for the past 2 weeks. Can't wait for your new videos. New sub here🎉
This was the third set of FreeCAD tutorials I tried and the first one that clicked. I understood both the "what" and the "why". I occasionally had to go back a few seconds to watch a section over again, but your explanations made things clear. More importantly, I think I "got" the basics of FreeCAD. Sure, there's a huge amount still to learn but now I feel like I have a solid foundation. I think you've rewired my brain to "think" FreeCAD. I'd absolutely love you to continue this series. I'm interested in modelling for 3d printing. If I want to print several separate parts, how would I do that in FreeCAD? What if I want my parts to join together? How about adding screws or screw holes? If you don't produce more episodes, you still have my very sincere thanks.
Thank-you Jeff, I've learned alot from your videos in a short time. I hope you keep it up because you impart the kind of knowledge I'm looking for and have already answered a lot of questions that I had.
Thanks, Jeff. I'm really struggling with making some simple Dwell cams for my project. I need 3 cams 80mm dia. X 5mm thick with a positive dwell and three with a negative dwell. This seem like it should be simple, but I can't to find the correct tool combinations to make it happen. ei; Positive dwells, cam A+ = 270* to 360*, cam B+ = 66* - 186*. Negative dwells, A- = 105* to 350* , B- = 260* to 350* , These are used to trigger micro switches to turn motors on/off and prevent component collisions in old bowling machines. We're building an emulator/ tester.
Thank you Jeff for making these video's. I've been trying to be more efficient in FreedCad for awhile. While I can model everything I've attempted it's far from an efficient way to do it, in other words I do it the hard way. After watching your video's I have learned so much.
How can I sign in to FreeCad if they do not accept my username or passwood. Being retired, I would like to start 3d printing along with FreeCad. Is there some one I can talk to or something I have to do to get into FreeCad before I get too old to care ??
Jeff, you have the knowledge to teach. The absolute best CAD exercise I've seen. Your voice is clear and it doesn't go too fast. It's easy to follow along and the way you build up what you want to teach means that it creates a basis for continuing on your own. So good! Looking forward to following you. I will recommend your channel to anyone who wants to do 3D printing and use FreeCAD for carpentry, metal work and building drawings. I'm really looking forward to seeing your tutorials on the different workbenches in FreeCAD
As a PhD who spent many years at university I can say that knowledge of a subject and ability to explain it to students are two totally different skills which rarely overlap. Jeff is an unique example of a person combining both.
Wow bro! These videos are so helpful! I can’t wait for more of them. I’ve only tried the first video object so far. It took like 50 tries but I got it finally. Thank you for taking the time to make these videos. Also the 360* revolution you did on this video blew my mind! 🤯. I can’t wait to try it! 🤙
These videos have been very welcome. As many others have experienced, I've watched a heap of UA-cam tutorials on Freecad but these are crisp, concise, well delivered and above all open up FreeCad in a practical manner. Thank you very much and please keep them coming.
Thank you so much, very clear and simple and i really hope you will continue to make these helpful videos. I would like to make a request for a tutorial on gears and holes for - or on a shaft. The ones i have found have seamed almost arcane - or is it that manipulating gears is freecad really is difficult? It's pretty easy to find how to draw a shape and then pad it out, but not this - or am i just stupid?
love your tutorials but on this one, even though i follow to the letter i cant get past the revolve stage. when i try any base axis nothing comes up and i get an error mess. "conflicting constraints". what do you think im doing wrong?
I hope your channel continues into the foreseeable future. Cause great content like this is hard to find. Especially on FreeCAD. I just found your channel tonight. You have some excellent content. Please continue the great work. Thanks from a new subscriber.
I hope that you are going to make more tutorials like this. You have answered so many questions I have had while watching other tutorials. Your voice is just right, pace isn't rushed and you don't, THANK the gods, keep injecting pointless off topic information. My poor old brain (63y) can actual keep up.
I have been watching recently a lot of FreeCad videos. Majority of authors are strong professionals in FreeCad but they totally lack teaching skills. They start with crafting overly complicated shapes and than quickly switch through most crucial moments, like attaching sketch to a plane or using hotkeys. Contrary, Jeff sticks to very simple shapes and demonstrates the concept of operation. I also like his demonstrations of using various tools to make the same operation. Jeff, please continue the channel. Maybe you want to set up some donations option as well.
I watched several videos but your are the only one I am able to follow and replicate exactly what you do and this tool is starting to make a lot more sense to me. I was overwhelmed in previous efforts to learn basic CAD. Thank you.
These videos have been excellent, very clear and easy to follow - please do something more on workflow/best practises like using symmetry and when to use constraint equal/parallel etc to make things easier to modify later.
At 4:33 I get those buried objects a lot...I am only day two with mechcanical CAD and FreeCAD. I was drawing such things in n left field then constrained them into place blindly - what a pain. Showing us 'view section' is just what we needed... thank you!
It was easy to understand even without the drawings, but I think it will help you understand better if you have them. I look forward to working with you.
This is what we need in order to learn anything
no silly 3 minutes intro
no trailers
no music
no unnecesary speech
no begging of comments and subscription and bell button
no low quality voice recorded in an echoing room
no sponsors
no advertisings
I watched all of the four videos in this channel and enjoyed every minute in them while lively applying the instructions
I am really sad that there are no more videos in the channel and I have to visit other channels to learn more
Exactly
Same. This was great. Straight to the point and useful
Seriously, I’ve watched a multitude of FreeCad tutorial videos but I just couldn’t absorb the contents or the speed it was given. I was discouraged and I was just about to stop trying to learn it, till I finally found your videos. The ease, the clarity… You have such a way to share your knowledge. I would add more positive comments but in a nutshell, please, please Jeff, don’t stop. I can’t wait to learn more.
As everyone said below, these are by far the best tutorials I've seen. I'm really looking forward to more videos from you. Truly appreciated.
I have seen many Freecad tutorials online. I just learnt 4 new things in one 8 minute video from you! Please continue with these. I hardly ever comment but you are fantastic in your explanations. Clear, Concise and to the point.
You have a gift for making CAD tutorial videos, keep 'em coming!
FINALLY .... someone with FULL explanations. Thank you!
This entire series is amazing, and has helped me a lot understanding better the way of 3D modeling in FreeCAD. Keep them coming!!! 👍
anyone know where this guy went? WE NEED MOOOOAAAAARRRRR
Jeff I need more. Following along with your videos while learning to use Ondsel ES which operates off of FreeCAD and you make this so easy to understand.
We need more Jeff.
Hello fellow Joe blow 🤣
I was about to stop using FreeCAD as the tutorials i used until now, didn't help as much as i would like.
Your tutorials are really well made, not too fast and not too slow so i become bored.
Great work
Hey, JeffCAD. Good job here. FreeCAD can be a bit frustrating, even for a guy proficient in Solidworks. Thanks for the great start!
Easiest videos to follow on freecad. Thanks for getting me started
Hey Jeff, just wanted to add to the multitude of other comments that these videos were very helpful and concise. I hope you are doing well and I hope to see more instructional videos from you.
Thanks.
How you get all those tools, I can't find those dimensions tools like vertical constraints
Just in the 4 videos I've learned more then all the others I've watched combined. I think now I should be able to create my part I've been getting so frustrated in designing for the past 2 weeks. Can't wait for your new videos. New sub here🎉
Only 4 tutorials?! yeah, that's all I really needed! Thanks alot! good videos!
This was the third set of FreeCAD tutorials I tried and the first one that clicked. I understood both the "what" and the "why". I occasionally had to go back a few seconds to watch a section over again, but your explanations made things clear. More importantly, I think I "got" the basics of FreeCAD. Sure, there's a huge amount still to learn but now I feel like I have a solid foundation. I think you've rewired my brain to "think" FreeCAD.
I'd absolutely love you to continue this series. I'm interested in modelling for 3d printing. If I want to print several separate parts, how would I do that in FreeCAD? What if I want my parts to join together? How about adding screws or screw holes? If you don't produce more episodes, you still have my very sincere thanks.
Great series of videos. Would love to see more. Thank you!!
Thank-you Jeff, I've learned alot from your videos in a short time. I hope you keep it up because you impart the kind of knowledge I'm looking for and have already answered a lot of questions that I had.
Thanks, Jeff.
I'm really struggling with making some simple Dwell cams for my project. I need 3 cams 80mm dia. X 5mm thick with a positive dwell and three with a negative dwell. This seem like it should be simple, but I can't to find the correct tool combinations to make it happen.
ei; Positive dwells, cam A+ = 270* to 360*, cam B+ = 66* - 186*. Negative dwells, A- = 105* to 350* , B- = 260* to 350* ,
These are used to trigger micro switches to turn motors on/off and prevent component collisions in old bowling machines. We're building an emulator/ tester.
Thank you Jeff for making these video's. I've been trying to be more efficient in FreedCad for awhile. While I can model everything I've attempted it's far from an efficient way to do it, in other words I do it the hard way. After watching your video's I have learned so much.
These tutorials are awesome, they're simple, concise, fun and helpful. Please make more! :)
How can I sign in to FreeCad if they do not accept my username or passwood. Being retired, I would like to start 3d printing along with FreeCad. Is there some one I can talk to or something I have to do to get into FreeCad before I get too old to care ??
more tutorials plzzzzz
your explaintion is so good
Jeff, you have the knowledge to teach. The absolute best CAD exercise I've seen. Your voice is clear and it doesn't go too fast. It's easy to follow along and the way you build up what you want to teach means that it creates a basis for continuing on your own. So good! Looking forward to following you. I will recommend your channel to anyone who wants to do 3D printing and use FreeCAD for carpentry, metal work and building drawings. I'm really looking forward to seeing your tutorials on the different workbenches in FreeCAD
As a PhD who spent many years at university I can say that knowledge of a subject and ability to explain it to students are two totally different skills which rarely overlap. Jeff is an unique example of a person combining both.
Great Video Thank You for your time, Im new to this and you make it look easy...
Wow bro! These videos are so helpful! I can’t wait for more of them.
I’ve only tried the first video object so far. It took like 50 tries but I got it finally.
Thank you for taking the time to make these videos.
Also the 360* revolution you did on this video blew my mind! 🤯. I can’t wait to try it! 🤙
These videos have been very welcome. As many others have experienced, I've watched a heap of UA-cam tutorials on Freecad but these are crisp, concise, well delivered and above all open up FreeCad in a practical manner. Thank you very much and please keep them coming.
Thank you so much, very clear and simple and i really hope you will continue to make these helpful videos. I would like to make a request for a tutorial on gears and holes for - or on a shaft. The ones i have found have seamed almost arcane - or is it that manipulating gears is freecad really is difficult? It's pretty easy to find how to draw a shape and then pad it out, but not this - or am i just stupid?
hej!
this mini intro series have been nice. im new to CAD and 3D printing. would you like to do a tutorial for internal threads? regards from sweden
love your tutorials but on this one, even though i follow to the letter i cant get past the revolve stage. when i try any base axis nothing comes up and i get an error mess. "conflicting constraints". what do you think im doing wrong?
Do more i these sir, I am a beginner in 3d modeling and cad. I love your videos❤
Amazing, Thank You!
You doing any more videos?
If you are flipping hurry up.
Love this channel, subscribed! Im a beginner in FreeCAD and this videos are most helpful for start! Thanks ❤
Thanks for subscribing! I'm glad these videos have been helpful!
I hope your channel continues into the foreseeable future. Cause great content like this is hard to find. Especially on FreeCAD. I just found your channel tonight. You have some excellent content. Please continue the great work. Thanks from a new subscriber.
The select face to chamfer trick is nice to know. 👍
Thanks you really helped me out
New sub🎉. Thanks for sharing
Thank you once again Sir!
Great content, thank you!
thank you !!!
Great info, short and to the point.
Thanks for the tips👍. Two in particular 1) "M" Key for switch line type, and 2) the Select and Preview when creating fillet or Chamfer.
I hope that you are going to make more tutorials like this. You have answered so many questions I have had while watching other tutorials. Your voice is just right, pace isn't rushed and you don't, THANK the gods, keep injecting pointless off topic information. My poor old brain (63y) can actual keep up.
Thank you for the great tutorials, your examples are the best I've seen for understanding what is happening, looking forward to seeing more.
I have been watching recently a lot of FreeCad videos. Majority of authors are strong professionals in FreeCad but they totally lack teaching skills. They start with crafting overly complicated shapes and than quickly switch through most crucial moments, like attaching sketch to a plane or using hotkeys. Contrary, Jeff sticks to very simple shapes and demonstrates the concept of operation. I also like his demonstrations of using various tools to make the same operation. Jeff, please continue the channel. Maybe you want to set up some donations option as well.
I watched several videos but your are the only one I am able to follow and replicate exactly what you do and this tool is starting to make a lot more sense to me. I was overwhelmed in previous efforts to learn basic CAD. Thank you.
These videos have been excellent, very clear and easy to follow - please do something more on workflow/best practises like using symmetry and when to use constraint equal/parallel etc to make things easier to modify later.
Thank you for your clear concise instructions. I’m just starting out in 3d modelling and these videos are brilliant.
Thanks again. I have done all 4 of your tutorials. They are the best, up to date ones around. Looking forward to the next ones!
At 4:33 I get those buried objects a lot...I am only day two with mechcanical CAD and FreeCAD. I was drawing such things in n left field then constrained them into place blindly - what a pain. Showing us 'view section' is just what we needed... thank you!
It was easy to understand even without the drawings, but I think it will help you understand better if you have them. I look forward to working with you.
Awesome tutorial! I learned a few new tricks. Thanks
Big thanks! I only watched these 4 on how to cad and I now feel I can cad anything.
I am following this tutorial please keep up your good work
Another great and helpful video, thanks for sharing!
I am waiting for more tutorials, you are doing great job!
Thanks for your sharing
Thank you!