Fixing the Rear Suspension on the CRF250F - Hagon Shock
Вставка
- Опубліковано 8 лип 2024
- Install video of the Hagon Shock from Bruce at Bruce's Suspension
0:00 Plastics and seat removal
0:50 Brake removal
1:09 Link and shock removal
2:30 Corona Link and Shock install
3:52 Easiest way to remove shock for adjustment
Torque Specs:
Upper / Lower Shock Mount Nut: 33 ft/lbs
Shock Link Rod Nut : 33 ft/lbsa
Triangle To Linkage Nut: 33 ft/lbs
Shock Arm Nut (Swingarm Side): 60 ft/lbs
Swingarm Pivot Nut: 65 ft lbs
Rear Axle Nut: 80 ft/lbs
www.brucessuspension.net/ - 704-637-3675
Link to other specs: drive.google.com/drive/folder... - Авто та транспорт
I did the whole suspension mods as well. I was a little disappointed with the Hagon shock and front fork mods, my bike was very stiff and not nearly as plush as I was hoping. I had seen a few riders make these mods and they all said it was immediately noticeably better, I didn't have the same experience.I had a professional suspension shop do the install and sag setup.
Everyone likes it a little differently that's for sure. The bike is a lot stiffer, but I haven't bottomed out yet!
Bruh I went hard af and got a custom race tech shock and paid over a grand and that piece of shit couldn’t last 2 laps on my local track and the stock shock handled it better…. Bbr springs is all you need for this bike and it will be a monster all that after market shit is absolute trash!
@@chrisvillarreal2752
🤔
Cost of hagon shock?
I bought it in a bundle from Bruce triplet... But I believe it's around 600$
The Hagon shock sucks for this bike. Vonkat just released their shock for the 250f, and i can say it is 100x better than the Hagon.
Love to see a video on it 👍
@@Garagehype199 ua-cam.com/video/7V6QPaMF00c/v-deo.html