Yoooooo! I had no idea y’all had a channel. I stopped in your shop about a year ago and was super intimidated by my noob status but y’all were awesome. I think I’m actually going to make the trip from Raleigh to come talk to you guys again.
One thing you may have forgotten to mention, These bows have no dampeners on them. The hoyts have that mini stabilizer out the front along with the limb dampeners. I honestly don’t see why everybody is so hell bent on a bit of vibration that can be taken care of from a couple bolt on accessories.
But if it has less vibration with no dampeners then it’s gonna be even better with dampeners.. so I agree pse needs to go full roller gaurd and beyond parallel limbs maybe change the series of aluminum they use to dampen sound and vibration
Did you guys try too see the draw cycle with 80% on the s2 was wondering if that helped out with eliminating that dumb. I am trying to figure out if I should go with the s2 of the e2 cam since I am 29” draw length and want to get the most out of the bow for speed
I currently shoot a PSE Stinger Max. 27.75 draw 400 spine length at 50lbs but that’s because I need to rebuild my strength. I sure I can do 60lbs soon.Whitetail deer hunting and target shooting. What do you recommend the 30 or the 33?
@@King_Archer_ my only thing with bowtech is the polymer limb pockets. I know they used to use them exclusively, but I haven’t looked at one in years. And it’s not even so much durability, but the cost. Paying the same price for a bow with a cheaper component just bugs me a little. Until I get the chance to shoot them back to back, I’ll remain torn lol.
@@jorrick66 I’ve heard the draw cycle is very aggressive. I will admit the deadlock system for cam tuning is by far the best out right now. I agree 1100-1200 for cheaper components is kinda weird.
I thought I read that the xf has a bigger axle diameter, and/or bigger bearings. Might cause a conflict with fitment. I’m no expert, just sharing some info.
@@jorrick66 Yesbi thought i heard that too im just wondering if they made the ec cam fit the new xf it would be supper counterproductive to redesign a new ec cam just for the xf when they need replacement parts still for the older bows and materials are hard to come by right now. Which makes me think its the same axle and bearings l but who knows.
You say short draw guys are exited, but no test for short draw, what a dissapointment. Just bought solution sd so im not interest to buy one but very curious...
![80lb Bows... Are They For You? [ RX7 Ultra, Revolt X80, Inline 5 ]](http://i.ytimg.com/vi/-OAToUevD4w/mqdefault.jpg)
Yoooooo! I had no idea y’all had a channel. I stopped in your shop about a year ago and was super intimidated by my noob status but y’all were awesome. I think I’m actually going to make the trip from Raleigh to come talk to you guys again.
Heck yea man come hang out with us again and shoot some bows!
I've been a PRIME and HOYT guy. These PSE bows are intriguing... Thanks guys, great review!
The PSE bows are definitely worth checking out! Thanks for watching!
I’m a pse guy with a evo nxt and a stinger but almost got a black 3. They fit similar shooters
That’s great now, nice video guys 👍
Sleigh ride into the valley at 90% on a lot of EVO's mine included.
Great review, Thank you! May be in your area soon, will check you out.
No doubt! Heck yea come on by, hang out and sling some arrows with us!
Great video guys!
Thanks for watching!!
Can't wait for my Prime Inline 5. Just shipped yesterday with 80 lb limbs!
It’s a sweet shooting bow. I love mine
Great review guys..
Thanks for watching!!
I love my fortis 33 with e2 cam. Smooth and fast
Not to mention they finally have a indention that is universal for 2 piece quivers in the industry
One thing you may have forgotten to mention, These bows have no dampeners on them. The hoyts have that mini stabilizer out the front along with the limb dampeners. I honestly don’t see why everybody is so hell bent on a bit of vibration that can be taken care of from a couple bolt on accessories.
We agree with you there. A good set of bars cures most vibration
But if it has less vibration with no dampeners then it’s gonna be even better with dampeners.. so I agree pse needs to go full roller gaurd and beyond parallel limbs maybe change the series of aluminum they use to dampen sound and vibration
You guys should start a Patreon as I’d donate a couple bucks to fix that obnoxious buzzing ballast.
Just go ahead and give me your PayPal. I’ll send a request
surprising amount of these on eBay. Might get one just to see.
Did you guys try too see the draw cycle with 80% on the s2 was wondering if that helped out with eliminating that dumb. I am trying to figure out if I should go with the s2 of the e2 cam since I am 29” draw length and want to get the most out of the bow for speed
I currently shoot a PSE Stinger Max. 27.75 draw 400 spine length at 50lbs but that’s because I need to rebuild my strength. I sure I can do 60lbs soon.Whitetail deer hunting and target shooting. What do you recommend the 30 or the 33?
I would check out the 30 if I were you being you have a shorter draw length.
Always had Mathew’s, but the xf30 and the cp28 are really grabbing my attention this year.
I’ve heard nothing good about the cp28 personally
@@King_Archer_ my only thing with bowtech is the polymer limb pockets. I know they used to use them exclusively, but I haven’t looked at one in years. And it’s not even so much durability, but the cost. Paying the same price for a bow with a cheaper component just bugs me a little. Until I get the chance to shoot them back to back, I’ll remain torn lol.
@@jorrick66 I’ve heard the draw cycle is very aggressive. I will admit the deadlock system for cam tuning is by far the best out right now. I agree 1100-1200 for cheaper components is kinda weird.
@@King_Archer_ absolutely. The deadlock is why I’m so interested in bowtech.
@@jorrick66 my brother in law shoots the solution and he loves it. Only thing is the grip is kinda wack.
That's is a beautiful bow...what kind of release is that?
We agree! Cody is shooting a Stan More X and Zakk was shooting a Stan Perfex
Do the new e2 and s2 cans fit the evl since the ec cam still fits this new xf? Thanks for the content!!
I thought I read that the xf has a bigger axle diameter, and/or bigger bearings. Might cause a conflict with fitment. I’m no expert, just sharing some info.
@@jorrick66 Yesbi thought i heard that too im just wondering if they made the ec cam fit the new xf it would be supper counterproductive to redesign a new ec cam just for the xf when they need replacement parts still for the older bows and materials are hard to come by right now. Which makes me think its the same axle and bearings l but who knows.
Would a 60 pound S2 cam draw similar to a 65 pound Evolve cam?
I don't have a dealer anywhere new me how does the e2 cam on the 33 compare to the ntn33
You say short draw guys are exited, but no test for short draw, what a dissapointment. Just bought solution sd so im not interest to buy one but very curious...
Sorry to disappoint man. Head over to our Instagram @extreme_outfitters and we’ll have a speed test up for you today. What draw length are you?
@@extremeoutfitters im 25" But i have no instagram account so it doesnt show me anything.
@@JJ79_ ah bummer
Mate, you guys just cost me a grand lol.
hahahahaha
The draw is stiff and has a hump regardless of the cam…..
Ehhhh Depending on the cam and mod Id have to disagree….
@@extremeoutfitters unless it’s the evolve cam you can’t get the s2 cam to feel comfortable period it’s going to dump on back end the way it’s design.