Gibson 63. I've been working on my '65 Buick Gran Sport for over a year now and every once in awhile I get the feeling I'm never going to get it done. Then I just watch your amazing work, get motivated and tackle another rusty panel. Thanks for the insipration!
You're remarkable workmanship throughout all your restoration videos, clearly shows that with a lot of hard work / patience & the desire to learn from others , that a project like this can be done by doing it yourself.: ) Once again your level of detail restoring this truck to a SHOW QUALITY level is truly BREATH TAKING to say the least . Thank you so much for sharing these videos with myself & others who are thinking of or are already in the process of doing a car/ truck restoration . Please keep these videos uploaded here on UA-cam for many more years , thank you & take care .
I watched all you video's today you did a great job on this truck.Thanks for filming everything I have a 56 that I'm going to be starting soon.Watching your vids put it all in place for me thanks for the inspiration. can't wait to see the finished product!
I know I'm late to the party, but dang those doors look sweet! Great inspiration and info. I'm planning to repaint (same color) my cab interior. Can you tell me, for the doors interior, how much paint did you prepare? I don't have a lot of experience and would like to not mix too much. A couple people told me a quart, single stage, would cover the whole interior?
Wow! Excellent! I watch videos like this and it kind of lets the wind out of my sails. My truck restore will never be as good as yours. But, hey, If I can do half as good as you I will be happy.
Just stumbled upon your videos from the summer here… nice work. Love your attention to detail; remind me of how I work. Learning watching you. Glad you showed some of the buffing work at the end. Wanted to see how that was done with the buffing tool. I'm starting a restoration of a '67 F100 and pulling it apart now. I will be at this stage in the spring of '15. Thanks for sharing the experiences! Subscribing. Clay
Gibson! I am a fan of yours! I saw your videos over and over again, I'm from San Juan, Argentina! I would like to paint my C10 the same color as your truck, Red, could you tell me the color code? I thank you very much, although I do not understand the language, I learn a lot!
I am learning sooooo much from watching you work. I am in awe to what detail you do everything, I think you have the ability to show your truck in the Detroit Autorama when your done with it. I have a question that I ask only because I am still learning at this, why did you only paint the inside of your doors and not both sides? It looks great and I am looking forward to more videos of your project and hope to start on my 67 Impala with what I have learned from your videos.
Love watching your videos , sure have learned a lot . If I decide to do my own painting , I will definitely be doing that part inside a large portable canvas garage ( with exhaust fans ) to eliminate all overspray from inside my main shop . I see that you setup a few fans by the garage roll up door & hung up some plastic to keep overspray from settling all over to a minimum : )
Thanks man that would be a great idea wish I had a bigger area to paint but it worked out fine will not be painting any more in this shop after my truck is complete
you must have a talent for spraying, I wath the gunman and it is discouraging cos of expensive gun so if you don't mind me asking what is the brand gun u use......goedendag
I just know it will be finished on the other side yeah it cost more time and money on tape and things but it's just the way I wanted to do it thank for watching man
the perfect it system is awesome , thats what I use. The only thing I do different is after the buffing is done I use a breathable protectant (formulated for NEW paint) called Shine Master by Wizards. Its the last step I do to protect the finish. Then after a few months I use regular wax.
all the proof that a good job begins by a good base, a good process and a good finish probably that these doors are better than the original as originally, often, there even no paint in the inside of the panels. I've often replaced doorskins that were bare metal on the non apparent side ...american bullshit!!!!!
Gibson 63. I've been working on my '65 Buick Gran Sport for over a year now and every once in awhile I get the feeling I'm never going to get it done. Then I just watch your amazing work, get motivated and tackle another rusty panel. Thanks for the insipration!
I'm doing an 84 short wide and agree! Don't have a lot of time so good to see what progress looks like
You're remarkable workmanship throughout all your restoration videos, clearly shows that with a lot of hard work / patience & the desire to learn from others , that a project like this can be done by doing it yourself.: ) Once again your level of detail restoring this truck to a SHOW QUALITY level is truly BREATH TAKING to say the least . Thank you so much for sharing these videos with myself & others who are thinking of or are already in the process of doing a car/ truck restoration . Please keep these videos uploaded here on UA-cam for many more years , thank you & take care .
Fantastic build. You can paint my car any day! Love this body style Chevy truck. Congrats on a beautiful build.
You are the MAN I have learned so much great stuff watching you made me a happy man Wayne.Thanks
I love how deep the paint looks.
I watched all you video's today you did a great job on this truck.Thanks for filming everything I have a 56 that I'm going to be starting soon.Watching your vids put it all in place for me thanks for the inspiration.
can't wait to see the finished product!
thanks for watching man good luck on the 56
I know I'm late to the party, but dang those doors look sweet! Great inspiration and info. I'm planning to repaint (same color) my cab interior. Can you tell me, for the doors interior, how much paint did you prepare? I don't have a lot of experience and would like to not mix too much. A couple people told me a quart, single stage, would cover the whole interior?
Nothing like painting with Bill Monroe singing in the background,Blue Moon of Kentucky keep on shineing...👍🏿
I noticed that too! Great music to work to.
Brother, you are an inspiration... Thank you
Thanks for showing your technique. Those doors are amazing.
'65 Econoline Pickup. Never finished.
Excellent work...This truck will be awesome.
Thanks man
Wow! Excellent! I watch videos like this and it kind of lets the wind out of my sails. My truck restore will never be as good as yours. But, hey, If I can do half as good as you I will be happy.
What a nice job...love your work!!!!
Thanks man
0:20 Heyyyy. Wet the floor. That's a good idea.
Your Awesome they turned out beautifully tks for sharing..
It’s painted better than it was at the factory. Nice job.
Just stumbled upon your videos from the summer here… nice work. Love your attention to detail; remind me of how I work. Learning watching you. Glad you showed some of the buffing work at the end. Wanted to see how that was done with the buffing tool. I'm starting a restoration of a '67 F100 and pulling it apart now. I will be at this stage in the spring of '15. Thanks for sharing the experiences! Subscribing. Clay
Thanks man good luck on your project
Whats the best way to sand the inside of a door like that to get the surface rust donw.. ?
Do each of the polishing pads last through enough use and cleaning to do the whole project or did you need a few?
Gibson! I am a fan of yours! I saw your videos over and over again, I'm from San Juan, Argentina! I would like to paint my C10 the same color as your truck, Red, could you tell me the color code? I thank you very much, although I do not understand the language, I learn a lot!
I am learning sooooo much from watching you work. I am in awe to what detail you do everything, I think you have the ability to show your truck in the Detroit Autorama when your done with it. I have a question that I ask only because I am still learning at this, why did you only paint the inside of your doors and not both sides? It looks great and I am looking forward to more videos of your project and hope to start on my 67 Impala with what I have learned from your videos.
To me it was easier to do one side at a time and complete the inside of the cab and then focus on all the outside panels
And I'm like you man, I learn from watching other people like you on UA-cam
You the man son! Bluegrass and GOOD body work. Where do you live? I need my 77 Silverado K10 rust repaired and painted.
That glasurit clear is good stuff . I’ve used it before . Keep up the good work
Neat job, convinced me to take the doors off my IH Scout and do the job properly. Cheers
Great job from all the way from Trinidad,I've watch majority of your videos thanks bro
Hey brother what brand base/clear auto paint are you using? I dont recognize that brand. Im always trying different brands.
looks real good steve,i always like the buffing part,reayl brings the color to life,nice job
Didn't realy know how much work was in cut and buff until I started thanks man
really nice work thums up
Subscribed..man your vids kick ass. Just picked up '64 C10. Having a blast. Thanks for sharing brother.
Love watching your videos , sure have learned a lot . If I decide to do my own painting , I will definitely be doing that part inside a large portable canvas garage ( with exhaust fans ) to eliminate all overspray from inside my main shop . I see that you setup a few fans by the garage roll up door & hung up some plastic to keep overspray from settling all over to a minimum : )
Thanks man that would be a great idea wish I had a bigger area to paint but it worked out fine will not be painting any more in this shop after my truck is complete
Looking very good. You are going to one fine truck when it's done. Your attention to detail is top notch.
Thank
That paint looks amazing, looks better than a brand new car.
is that single stage paint? looks great
It’s Basecoat Clearcoat
Great job Mr Gibson ,you are watched in Europe,greetings from Croatia.
11:45...made me smile..your doing a PRO job PEEEACE
How long did you wait before you shot your clear coat? If you don't mind can you let me know.
It was like 90* that day so I had time to clean my gun from shooting the base coat so I waited about 45 min to an hour
Amazing video! How did you buff in the grooves in the door?
The grooves are raised so I went around with the big buffer pretty easy, on hard to reach places I use my drill with a small buffing pad
That glasurit really looks good. How did you make the choice to use it. Rich good color , and wet.
A lot of custom body shops around here use the glasurit seen a lot of good results so I'm giving it a shot
Looks like you made a good choice .. I enjoy videos , thanks...
Wonderful
What kind of paint did you use? Single stage urethane ,synthetic enamel or 2pack? Wonderful job.
Glasurit paint base coat clear coat
You have both my appreciation and respect. Did you need to refill your paint gun with red during this process.
Can’t really remember if I had to refill or not, but that cup held a lot of paint, thanks for watching
Looks sweet!
Very nice. I wonder if you will have to buff it again in a couple of weeks once the paint completely cures?
Don't realy know I was told after 24 hours so will just see
Great job we need more
very nice work
Looks really good awesome
what type of paint is that ?
Nice work!
Very nice !
I made this mistake once and everything in the garage was covered with overspray. Looks good though.😊
that sucks. i did my roommates garage to. opps!!
What type of clear is that it looks like it flows great.
Glasurit HS multi clear 923-255
Looks real nice I'm working on the same truck
love the background music :)
very good job
Nice job!
very nice it is coming together
dam is that coming along ..great work ,keep at it
Looks really great
Thanks man your coming along pretty good your self take it easy
looks good
Looks great!! What run...in that location it's a character mark! lol
you must have a talent for spraying, I wath the gunman and it is discouraging cos of expensive gun so if you don't mind me asking what is the brand gun u use......goedendag
It is a binks gun 1.4 tip
+gibson63 thanks goedendag
That's how ya do it!
? why color sand b4 you completed the outer side of the doors?
I just know it will be finished on the other side yeah it cost more time and money on tape and things but it's just the way I wanted to do it thank for watching man
gibson63 i was just curios thanks
Came out great
How do I contact you for work?
I don’t actually do this type of work for a living
Mate for work being carried out in the average man's garage this is impressive stuff.
Thanks man
That’s pretty
Damn nice!
Damn nice work buddy
the perfect it system is awesome , thats what I use. The only thing I do different is after the buffing is done I use a breathable protectant (formulated for NEW paint) called Shine Master by Wizards. Its the last step I do to protect the finish. Then after a few months I use regular wax.
Good idea I'll check that out thanks
WOW you're fast
i thought he was gonna paint inside the doors where rust lurks
Sweeeeeeet !!!!!
Hell yeah. That gun lays it DOWN.
Yeah that gun really does the trick thanks
gibson63 the gun helps..BUT it the the man with the gun in his hand ,that layed down the base/clear PEEEACE
great help, thanks
amazing result
Thanks man
Hello man mi name is joao i love is red What this is red what name this is red .very ceazy
what run , I don't see no run ..there is no run..looks way good
Show quality finish.
all the proof that a good job begins by a good base, a good process and a good finish
probably that these doors are better than the original as originally, often, there even no paint in the inside of the panels.
I've often replaced doorskins that were bare metal on the non apparent side ...american bullshit!!!!!