After 8 minutes of being told what it cannot do I got fed up and could watch no more. I wanted to know what it could do and how it's set up to do that as I was a dozer operator about 35 years ago
A lot of good information for many operators that have never used GPS. It's another tool in your toolbox and it takes a lot of time to utilize all of it's capabilities.
wailnshred Not necessarily true, at that point you take off your GNSS antenna, and bust out your Machine Control prism and Topcon Total Station. Come check out the LPS video on my channel. 3D Grading in a 200’ Tunnel.
Hahaha "Until you're under a bridge" Dude I had this happen to me more times than I should, or going around a wall or when you forget to charge your batteries the night before 🤣
Good video. I've been running a dozer for a long time and the company I work for just got a GPS machine. It's just like you said, I have allot to learn to actually be productive.
Yeah they don't realize that parts of a job have different off sets for different things. There is a lot to a GPS dozer not just get in and go. It is a great tool though. Makes a really good operator even better if he takes the time to learn everything about it. And like you say there are a lot of tricks that can be used. Haven't used much topcon, but have used Trimble gcs 900. Anyway good video is this part of your algorithm series.
as a dozer opperator on a now 5 year old cat D6 explained it. The GPS for that dozer could do the up and down, And move each corner upp or down,,, but it could not tilt the blade left or right to make material flow to the sides. But it only worked properly at slow speeds. But another dozer, this time Liebherr with different type of GPS only could do the up and down even tho it was more ''Advanced'' as explained by the dealer.
Love this !! Thank you thank you ! GPS dozer is for your fine finish grade only! You have to cut out and get pretty close because the blade won’t cut much out ! Hit a rock and your blade is skipping, you have to be working at all times when you auto your gps dozer lol !! Silly boys dozers are for girls now 😉🥰
I’ve been running machine control for 4 years . Did it the other way 21 years . I don’t use auto until I have it close using my cross section view . Trimble is by far my favorite. Topcon second . Last but not least Leica . Also offsets . You have sub grade , finish grade , rock grade finish floor all that can be changed . You have to know your thickness of concrete , pavement or slope . Topsoil had to be accounted for . Say .33 for ample topsoil spread . Without an excavator or pan in front of you moving the bulk the dozier is useless . I’ve heard a trained monkey can run GPS dozier . Ha . No way . I’ve got so many jobs under my belt that I’ve seen it all . GPS is a tool like a hammer or saw . Trouble shooting is also a big deal . I also run my own localization. I have the rover to go with my dozier . So I can check and change blade wear and go behind myself or lay out all kinds of things . Fire plugs , water valves , storm boxes . Etc . I’m considered very valuable to my company. Interestingly enough I lied to get in my first gps dozier . And I was lost ! Lol but I learned fast and later went to John Deere training days at the proving grounds and REALLY got good .
Been running equipment for a while, from coast to coast. The BS about doing things by 'eye' cracks me up. I've done plenty of finish work by eye. I'll take my GPS system and go up against anyone doing it that way. There's just no comparison. I've saved weeks of work on projects with this stuff. You need to understand it, but once you do its crazy productive.
You are correct, i have used topcon 3d on 953d and trimble on excavators you cannot get better ,all this"by eye" is not bad, but after 30 years plus gps is far far quicker...
Where did you get that sweatshirt? I like the gps in my 6 to stake the job. I keep lath in the cab and stake for everyone else who doesn't have a gps system. Then fisnish it off when they get it close. You can get a more done when everyone knows gr.
I’d love to learn one of these systems for bigger projects, because running an 8 with a guy walking with a laser setup and a stick in his hand can get frustrating. I can do a decent job just doing it off of my eye, but like you said you still have clean up and compaction to take into consideration. Anyway, I feel like if anyone believes these misnomers that you brought up in the video they are probably irrelevant people to be concerned with and if you put them in a seat of a machine that’s quickly find out that we have job security for a VERY long time as operators. As a side note I love the way Canadians say “PROcess” and “PROject” haha cheers
GPS is a great tool ( especially with someone operating that knows how to move dirt). It is also killing a very usefully skill. Being able to grade without GPS is a hard thing to do. It has been done for years. There is more dependency on the electronics vs the skill.
So you took 20 minutes to try to justify your place in the seat? Guessing someone in the canteen pissed you off and said the gps does it all for you. Being honest, as an operator myself, you’re making it seem much harder than it actually is, the reality is that the auto on the GPS *DOES* do most of the work for you, any idiot knows you can’t push out 500mm cuts. Also...the new intelligent komatsu dozers, CAN adjust for a full blade, they’ll cut gradually so you don’t stop, they’ll lift the blade when it senses its full (resistance). It also has fill/spread function. Don’t be threatened by gps mate, it’s a tool FOR the operator, not to replace the operator. ;-)
I have never ran a GPS Dozer but I can cut grade with my eye I was taught by an old-timer who had 40 years experience running dirt equipment and I worked under him for 10 years I would refer to myself as a finish Dozer hand to say the least
Had a guy in a gps excavator yesterday who was in the wrong design, he was on the wrong side of his bucket while cutting a chimney drain in, needless to say we had to refill with clay compact and re-cut the trench
We getting all this gps and like you said there’s a lot of scenarios first of all when I get to a job site full of trash clean up all the trash then we get a ballpark of what’s going on hog it all out and then hit that GPS for the final final grade!! But lotta time a handful of the guys you know how to run the GPS figure it all out I got the whole place Done by common sense in an eyeball then we detail it up with the GPS in about five guys at a 200 not a run it so far but we are learning
For the sake of job security, it's good that there's no true "auto button". If that were the case, the company would waste ZERO time in yanking operators out the equipment...for good. I've never heard of a fully autonomous dozer, hoe or crane. Good vid.
cranes are the same thing computers are the confusing part. to learn but if you know how to operate cranes etc some people try to make a big deal of it so get in the machine turn it on turn the acl on and it is so simple if you have problems ask a kid walking buy how to work the computer ...computers absolutely fuck operators when they aren.t working
John Savoy There is certainly a push for all things autonomous. Employers are thinking they're saving money by replacing workers with computers. Bad part is that it is a worker who gets a paycheck and then circulates that paycheck into the economy that keeps the economic system afloat. Robots don't buy homes, clothes, new vehicles and grocery shop. There needs to be a rethink on replacing humans with autonomous technology
I have no problem with GPS in machine's, in fact I think it saves a lot of cost when grading because you don't need a bunch of surveyors on site all the time. The only thing that is worrying me is that the GPS is getting better and before you know it you won't need any operators for dozers, diggers, graders or no more dump truck drivers, maybe I'm just being paranoid, has anyone else have these thoughts?
Dude: what I have been trying to teach my apprentices for the last 40+ years is that every pass, every push, every bucket full is different! Some more different than others. They have been proclaiming that the computer will replace the operator for many years now. OK. Except they had to hire three computer programmers that had little if not any clue about what they were doing, to replace a competent operator.
Idk man the dozer I was in with gps controlled all blade movements just had to make it go forward or reverse an drive it around to collect grade data at diff gps points put the program in an could of never been in a dozer b4 an have it done like a pro … guess u forgot to say not all gps systems r the same
If you know how to move dirt you can run a dozer on gps. I learned with older guys that say run it with your ass. So ass up against the seat. The gps help me feel what being level dead level truly is. My fine grade is better and faster. I have the eagle eye with a gps computer in my head now. Lol
Im a new operator I have been trained on a d3 cat bulldozer. The things you are saying make sence. When my friend said bulldozer is easiest machine I think he's full of shit. Iv driven excavator bulldozer backhoe and grader and grader is most finicky of all. Seems simple but its not. Any help you can give me as a new operator I thank you Now. Love your videos keep up the good work
Your friends full of shit or isn't a true operator, anyone can pull a stick and say its easy. Keep at it. I always found the motorgrader to be the most challenging. Stay in the seat friend
The people think it’s easy to just push dirt and getting something level , but basically the operator is inside the cab and is in a very bad angle to estimate what he is going. Tracking layers a few cm all the way, I feel it’s very hard to see what you are doing. The only way I’ve found that works for me at grading is using an excavator with a blade large bucket, I see what I am doing , and if I have a laser to tell me what is the level, it works just fine.
A lot of guys hate on gps because they aren’t good enough to run it. It’s just close minded. I don’t run gps because I work for my parents small company but I do use a laser receiver pretty often and I love it. I agree you should be able to do both auto and manual but anyone that knows anything about gps can see that it’s the better way to go. It’s funny because most farmers see the benefits but the dirt guys see it as a strike on their masculinity to use gps.
Dozerboy D8 I don’t need to use gps to see the benefits or to know how it works. If you keep an open mind and want to learn you’d be amazed at how simple such big scary things can be. A reasonable person can see that companies wouldn’t be spending thousands of dollars on gps equipment if it were so inferior to manual methods like pretentious old timers would lead you to believe.
Strangefruit Son it's odd to me that you would say keep an open mind, but you know next to nothing about GPS or the issues with gps. I how ever ran my first gps machines over 10 years ago and have trained several hands on how to use it since. Now who's mind needs opening to the real world?
Dozerboy D8 you’d argue with a rock wouldn’t you? It’s really funny to me how much guys like you hate everything just because you suck at it. I’m sure you’re one of those guys that can’t run anything but a cat because it’s not cool enough huh? I’m sure you’re right though with your infinite years of wisdom and all the companies spending hundreds of thousands on gps integration are all wrong. Maybe you should watch his video again so you’ll have a little more insight into what’s going on.
I’ve clearly hurt your feelings man so I apologize for that. Its obvious that you saw an opportunity to try and prove your masculinity by running your mouth to someone you assume is younger and less experienced than you are so you jumped on it. I can’t help you with your insecurities but I can tell you that they are there and you might want to seek professional help with them because what you’re doing here is only going to be temporary relief.
Pushy Six you should check out the cut fill mapping feature in TRIMBLE Earthworks that starts by colouring up the cut fill areas in plan, cross section and profile views by comparing a scan surface and the design surface and then constantly updates as you make passes with the machine.
The dozer knows what the grade is but doesn't know there's 6' of material in front of it. Obviously the dozer can't push that much material. Auto grade only works within the physical capabilities of the machine.
Take that junk out of the cat and find an real operator. Stakes.....learn stakes then learn how to operate the GPS properly. And only then yes the machine will control the blade for you....
GPS is a a tool. Just like any tool it’s only as good as the operator and it can’t make you an operator. Equipment will become autonomous. It a ways off but it will. That’s not to say no one will be on site, but labor is getting to costly.
i had to do it all by using eye then having a string line on the batters first for trimming then for pushing topsoil on, also trimming up after a excavator we use to use laborers with boards to bone in the heights not its all gps, while it's good it now takes the skill and art out of operating machines, hence why i am thinking of leaving the trade
"The art of experience" being lost to electronic gadgetry is something that we in the music business see a lot of; I can draw a straight line across the table from "Dozers with GPS" to "Casinos with electronic drums". A lot of the older drummers who worked in the casino bands, when they first experienced the electronic kits were not impressed with all the fancy stuff they could do and were resistant to learning even the basics of "how to run them". Those were the guys who you'd see less and less of at "shift change" (casinos typically have multiple bands play on the same stage, hence the same set of drums...drums bulldozers... same/same...kinda/sorta...). They were working less because of being adverse towards adjusting with technology. Personally I can't stand E-drums and I'm with you on the "eyeball it" thing. A good operator has to know the basics and then some. And experience is something one cannot buy, you gotta earn it from the ground up.
very old dozer, with the new systems u can go on auto and it will fill up the blade will detect slip and carry the material for you.... so you literaly just need to drive back and fort.... and care to get some slots ... a new dozer can be operated by a total fool
You should stick to what you know best, don't do instruction video's that are ridicules' . I felt like Nicholas were dumb a@#*!! holes. I did the same thing he did and wrote this note. You need to go back to your great projects and do what you do best.
GPS is not dependable it is accurate within a tenth, but I can cut within a hundredth manually, having ran both, gps is for the ones who are not good enough, a good grade man could name his pay,within reason, I know, I did,.Gps changes it grade for no reason other than a poor satellite reception, but construction in general has declined in workmanship, men were good at their jobs once, now it's good enough for a poorly done job
If you cut within a hundredth on a dozer it's by accident. If a dozer cut is verified within a hundredth by a survey it's by accident. Dozer cuts are designed to the hundredth. The same GPS that controls the machine controls the rod man's topo shots.
Ohh your such a youngster, how the hell you think we did it before GPS and the survey team did not have GPS, think out side the box son, be a journeyman,be a professional, not a joystick jockey pushing a button, and when we blue topped within a hundredth it was no accident we were that good, we took pride in our ability to do so, but the lazy kids now days would have the computer do it because it's too hard, Damn right it's hard, we never let that stop us,, Having been on and used GPS they are only accurate within a tenth up or down ,that is a total of 2 tenths difference,something we never settled for, we were better!!
More like half a tenth, further, even if the grade man wasn't using GPS back when you were "grading within a hundredth" he was certainly using a transit and grade rod, and if that man holding the grade rod isn't literally perfect, your grade will be off by more than a hundredth. Sorry, but grading to 1/8th of an inch across and entire site never happened, and isn't going to. 3 hundredths, sure, but not 1.
After 8 minutes of being told what it cannot do I got fed up and could watch no more. I wanted to know what it could do and how it's set up to do that as I was a dozer operator about 35 years ago
A lot of good information for many operators that have never used GPS. It's another tool in your toolbox and it takes a lot of time to utilize all of it's capabilities.
this operator is so experienced, his explanations are bang on, very good video!
Excellent video. It doesn't replace an operator, it replaces the grade checker. (Until you're under a bridge)
wailnshred
Not necessarily true, at that point you take off your GNSS antenna, and bust out your Machine Control prism and Topcon Total Station. Come check out the LPS video on my channel. 3D Grading in a 200’ Tunnel.
Hahaha "Until you're under a bridge"
Dude I had this happen to me more times than I should, or going around a wall or when you forget to charge your batteries the night before 🤣
the best thing iv ever heard GPS explained is to use it as a reference and just run the dozer
You take a really long time to say not very much.
Ya, really annoying
😂
Good video. I've been running a dozer for a long time and the company I work for just got a GPS machine. It's just like you said, I have allot to learn to actually be productive.
Yeah they don't realize that parts of a job have different off sets for different things. There is a lot to a GPS dozer not just get in and go. It is a great tool though. Makes a really good operator even better if he takes the time to learn everything about it. And like you say there are a lot of tricks that can be used. Haven't used much topcon, but have used Trimble gcs 900. Anyway good video is this part of your algorithm series.
Trimble makes awesome GPS equipment.
Good explanation for those who are clueless on operating any earth moving equipment.
Boss ur a great teacher. U knew what we were looking for here . U did 1000 percent great job.
as a dozer opperator on a now 5 year old cat D6 explained it. The GPS for that dozer could do the up and down, And move each corner upp or down,,, but it could not tilt the blade left or right to make material flow to the sides. But it only worked properly at slow speeds. But another dozer, this time Liebherr with different type of GPS only could do the up and down even tho it was more ''Advanced'' as explained by the dealer.
Apparently not up on new technology. Show the outside of the machine.
Love this !! Thank you thank you ! GPS dozer is for your fine finish grade only! You have to cut out and get pretty close because the blade won’t cut much out ! Hit a rock and your blade is skipping, you have to be working at all times when you auto your gps dozer lol !!
Silly boys dozers are for girls now 😉🥰
I’ve been running machine control for 4 years . Did it the other way 21 years . I don’t use auto until I have it close using my cross section view . Trimble is by far my favorite. Topcon second . Last but not least Leica . Also offsets . You have sub grade , finish grade , rock grade finish floor all that can be changed . You have to know your thickness of concrete , pavement or slope . Topsoil had to be accounted for . Say .33 for ample topsoil spread . Without an excavator or pan in front of you moving the bulk the dozier is useless . I’ve heard a trained monkey can run GPS dozier . Ha . No way . I’ve got so many jobs under my belt that I’ve seen it all . GPS is a tool like a hammer or saw . Trouble shooting is also a big deal . I also run my own localization. I have the rover to go with my dozier . So I can check and change blade wear and go behind myself or lay out all kinds of things . Fire plugs , water valves , storm boxes . Etc . I’m considered very valuable to my company. Interestingly enough I lied to get in my first gps dozier . And I was lost ! Lol but I learned fast and later went to John Deere training days at the proving grounds and REALLY got good .
Been running equipment for a while, from coast to coast. The BS about doing things by 'eye' cracks me up. I've done plenty of finish work by eye. I'll take my GPS system and go up against anyone doing it that way. There's just no comparison. I've saved weeks of work on projects with this stuff. You need to understand it, but once you do its crazy productive.
You are correct, i have used topcon 3d on 953d and trimble on excavators you cannot get better ,all this"by eye" is not bad, but after 30 years plus gps is far far quicker...
Couldn’t agree more.
Where did you get that sweatshirt? I like the gps in my 6 to stake the job. I keep lath in the cab and stake for everyone else who doesn't have a gps system. Then fisnish it off when they get it close. You can get a more done when everyone knows gr.
Click baited us with the hotty in the thumbnail. You sneaky rascal.
There was a woman in the thumbnail, I came here for the woman, there is no woman. I'm sad. Informative video though.
Yeah, he clickbaited us!
Best video yet my friend
I’d love to learn one of these systems for bigger projects, because running an 8 with a guy walking with a laser setup and a stick in his hand can get frustrating. I can do a decent job just doing it off of my eye, but like you said you still have clean up and compaction to take into consideration. Anyway, I feel like if anyone believes these misnomers that you brought up in the video they are probably irrelevant people to be concerned with and if you put them in a seat of a machine that’s quickly find out that we have job security for a VERY long time as operators. As a side note I love the way Canadians say “PROcess” and “PROject” haha cheers
What it does is finish grade...and it sure beats doing it with a string
How do you overcome the fear of possibly messing something up? It's the one feat I have that's held me back from using this machine
Scott last time I heard you forgot to calibrate the cutting edge and was high
GPS is a great tool ( especially with someone operating that knows how to move dirt). It is also killing a very usefully skill. Being able to grade without GPS is a hard thing to do. It has been done for years. There is more dependency on the electronics vs the skill.
Nah , you freestyle just as much as you run auto . It kills labor jobs and surveyors
It must be because it’s a Deere I run a d6k set gps throttle up and wake up 10-12 hours later depending when my foreman wakes me up
So you took 20 minutes to try to justify your place in the seat? Guessing someone in the canteen pissed you off and said the gps does it all for you.
Being honest, as an operator myself, you’re making it seem much harder than it actually is, the reality is that the auto on the GPS *DOES* do most of the work for you, any idiot knows you can’t push out 500mm cuts.
Also...the new intelligent komatsu dozers, CAN adjust for a full blade, they’ll cut gradually so you don’t stop, they’ll lift the blade when it senses its full (resistance). It also has fill/spread function.
Don’t be threatened by gps mate, it’s a tool FOR the operator, not to replace the operator. ;-)
Just Change your offsets and you can use auto the whole time while in design.
I have never ran a GPS Dozer but I can cut grade with my eye I was taught by an old-timer who had 40 years experience running dirt equipment and I worked under him for 10 years I would refer to myself as a finish Dozer hand to say the least
I used to powder coat those in my previous job. Premier Finishing lol
I dont even operate yet and im thinking this guy drinks way too much...too many dead brain cells....
Had a guy in a gps excavator yesterday who was in the wrong design, he was on the wrong side of his bucket while cutting a chimney drain in, needless to say we had to refill with clay compact and re-cut the trench
Good point.....
We getting all this gps and like you said there’s a lot of scenarios first of all when I get to a job site full of trash clean up all the trash then we get a ballpark of what’s going on hog it all out and then hit that GPS for the final final grade!! But lotta time a handful of the guys you know how to run the GPS figure it all out I got the whole place Done by common sense in an eyeball then we detail it up with the GPS in about five guys at a 200 not a run it so far but we are learning
Ummm I quit watching after he couldn't fire up his cat the first time lol
Gerald Paul hahaha
He's a Foreman. He doesn't work full-time as an operator anymore. He may not be all that familiar with that particular piece of equipment.
Typical...another foreman giving direction that needs direction 🤔
For the sake of job security, it's good that there's no true "auto button". If that were the case, the company would waste ZERO time in yanking operators out the equipment...for good. I've never heard of a fully autonomous dozer, hoe or crane. Good vid.
cranes are the same thing computers are the confusing part. to learn but if you know how to operate cranes etc some people try to make a big deal of it so get in the machine turn it on turn the acl on and it is so simple if you have problems ask a kid walking buy how to work the computer ...computers absolutely fuck operators when they aren.t working
Autonomous machines are in use now,it is only a short while when operators are obsolete
John Savoy There is certainly a push for all things autonomous. Employers are thinking they're saving money by replacing workers with computers. Bad part is that it is a worker who gets a paycheck and then circulates that paycheck into the economy that keeps the economic system afloat. Robots don't buy homes, clothes, new vehicles and grocery shop. There needs to be a rethink on replacing humans with autonomous technology
So you have to rough grade. It doing the finish grade it doing your job for you.
I have no problem with GPS in machine's, in fact I think it saves a lot of cost when grading because you don't need a bunch of surveyors on site all the time.
The only thing that is worrying me is that the GPS is getting better and before you know it you won't need any operators for dozers, diggers, graders or no more dump truck drivers, maybe I'm just being paranoid, has anyone else have these thoughts?
Dude: what I have been trying to teach my apprentices for the last 40+ years is that every pass, every push, every bucket full is different! Some more different than others. They have been proclaiming that the computer will replace the operator for many years now. OK. Except they had to hire three computer programmers that had little if not any clue about what they were doing, to replace a competent operator.
yer so helpful, i wanna run a yuke when I get big...
Idk man the dozer I was in with gps controlled all blade movements just had to make it go forward or reverse an drive it around to collect grade data at diff gps points put the program in an could of never been in a dozer b4 an have it done like a pro … guess u forgot to say not all gps systems r the same
Where can I get one of those jumpers!?
1.14 Mins, hydrulic ram creeping?
Good video dude
GPS does everything end of discussion
Real complex. Cut here, fill there.
Well said!! I here armchair operators say that all the time ,even about excavators !
If you know how to move dirt you can run a dozer on gps. I learned with older guys that say run it with your ass. So ass up against the seat. The gps help me feel what being level dead level truly is. My fine grade is better and faster. I have the eagle eye with a gps computer in my head now. Lol
Love your videos man , but I gotta know do you say cents as a way to remember tenths
Centimetres. 15 cents is short for 15 centimetres, or 150mm. (6 inches for the Americans)
Im a new operator I have been trained on a d3 cat bulldozer. The things you are saying make sence. When my friend said bulldozer is easiest machine I think he's full of shit. Iv driven excavator bulldozer backhoe and grader and grader is most finicky of all. Seems simple but its not. Any help you can give me as a new operator I thank you Now. Love your videos keep up the good work
You are such a tool!!your in mud that’s not final grade. Yes I’ve worked with GPS their great but your demonstration licked balls dude.
Your friends full of shit or isn't a true operator, anyone can pull a stick and say its easy. Keep at it. I always found the motorgrader to be the most challenging. Stay in the seat friend
The people think it’s easy to just push dirt and getting something level , but basically the operator is inside the cab and is in a very bad angle to estimate what he is going. Tracking layers a few cm all the way, I feel it’s very hard to see what you are doing.
The only way I’ve found that works for me at grading is using an excavator with a blade large bucket, I see what I am doing , and if I have a laser to tell me what is the level, it works just fine.
A lot of guys hate on gps because they aren’t good enough to run it. It’s just close minded. I don’t run gps because I work for my parents small company but I do use a laser receiver pretty often and I love it. I agree you should be able to do both auto and manual but anyone that knows anything about gps can see that it’s the better way to go. It’s funny because most farmers see the benefits but the dirt guys see it as a strike on their masculinity to use gps.
Strangefruit Not good enough to run it? You have never ran a dozer with GPS what do you know....
Dozerboy D8 I don’t need to use gps to see the benefits or to know how it works. If you keep an open mind and want to learn you’d be amazed at how simple such big scary things can be. A reasonable person can see that companies wouldn’t be spending thousands of dollars on gps equipment if it were so inferior to manual methods like pretentious old timers would lead you to believe.
Strangefruit Son it's odd to me that you would say keep an open mind, but you know next to nothing about GPS or the issues with gps. I how ever ran my first gps machines over 10 years ago and have trained several hands on how to use it since. Now who's mind needs opening to the real world?
Dozerboy D8 you’d argue with a rock wouldn’t you? It’s really funny to me how much guys like you hate everything just because you suck at it. I’m sure you’re one of those guys that can’t run anything but a cat because it’s not cool enough huh? I’m sure you’re right though with your infinite years of wisdom and all the companies spending hundreds of thousands on gps integration are all wrong. Maybe you should watch his video again so you’ll have a little more insight into what’s going on.
I’ve clearly hurt your feelings man so I apologize for that. Its obvious that you saw an opportunity to try and prove your masculinity by running your mouth to someone you assume is younger and less experienced than you are so you jumped on it. I can’t help you with your insecurities but I can tell you that they are there and you might want to seek professional help with them because what you’re doing here is only going to be temporary relief.
Pushy Six you should check out the cut fill mapping feature in TRIMBLE Earthworks that starts by colouring up the cut fill areas in plan, cross section and profile views by comparing a scan surface and the design surface and then constantly updates as you make passes with the machine.
look at your screen @4:45 your machine is trying to Cut 1.03 of dirt.
how did we run a dozer without A/C and no GPS for 40 years and got the job done faster and better than all the electronic crap
No woman...sad
The dozer knows what the grade is but doesn't know there's 6' of material in front of it. Obviously the dozer can't push that much material. Auto grade only works within the physical capabilities of the machine.
you need about 100 mil tolerance for auto to work
Older operators never had !!! Today's world
Public speaking is apparently more difficult than operating.
I find the barriers to working with any kind of plant is common sense and the lack of use your head
Take that junk out of the cat and find an real operator. Stakes.....learn stakes then learn how to operate the GPS properly. And only then yes the machine will control the blade for you....
GPS is a a tool. Just like any tool it’s only as good as the operator and it can’t make you an operator.
Equipment will become autonomous. It a ways off but it will. That’s not to say no one will be on site, but labor is getting to costly.
Ok lets get to it......fk
KOMATSU Intelligent Machine Control. Mic Drop.
Whats a Pro-ject? Jk love your vids!
Screen is in a terrible position should be in front of you
Best thing I ever did was get rid of that fucking topcon junk and get Trimble!
Better save ur money it's coming
us old timers {who dont use gps} use our "eye balls" to make grade.been at it 31 yrs.
i had to do it all by using eye then having a string line on the batters first for trimming then for pushing topsoil on, also trimming up after a excavator we use to use laborers with boards to bone in the heights not its all gps, while it's good it now takes the skill and art out of operating machines, hence why i am thinking of leaving the trade
"The art of experience" being lost to electronic gadgetry is something that we in the music business see a lot of; I can draw a straight line across the table from "Dozers with GPS" to "Casinos with electronic drums".
A lot of the older drummers who worked in the casino bands, when they first experienced the electronic kits were not impressed with all the fancy stuff they could do and were resistant to learning even the basics of "how to run them". Those were the guys who you'd see less and less of at "shift change" (casinos typically have multiple bands play on the same stage, hence the same set of drums...drums bulldozers... same/same...kinda/sorta...). They were working less because of being adverse towards adjusting with technology.
Personally I can't stand E-drums and I'm with you on the "eyeball it" thing. A good operator has to know the basics and then some. And experience is something one cannot buy, you gotta earn it from the ground up.
I think the auto button is broken thats why its not doing anything 😂😂😂
We get it dude get to the point!!!
don't watch anything in mind.
he is lien. he didn't set the cruise control
very old dozer, with the new systems u can go on auto and it will fill up the blade will detect slip and carry the material for you.... so you literaly just need to drive back and fort.... and care to get some slots ... a new dozer can be operated by a total fool
7 MINUTES OF BEING A SMART ASS AND THESE PEOPLE STILL KNOW NOTHING!! EXPLAIN YOU NEED TO GET WITHING A TENTH AND THEN USE AUTO!!
WTF?
hablame en castellan n enriendo un pito
You should stick to what you know best, don't do instruction video's that are ridicules'
. I felt like Nicholas were dumb a@#*!! holes. I did the same thing he did and wrote this
note. You need to go back to your great projects and do what you do best.
Thank you for your input
GPS is not dependable it is accurate within a tenth, but I can cut within a hundredth manually, having ran both, gps is for the ones who are not good enough, a good grade man could name his pay,within reason, I know, I did,.Gps changes it grade for no reason other than a poor satellite reception, but construction in general has declined in workmanship, men were good at their jobs once, now it's good enough for a poorly done job
John Savoy i tell them what they are gonna pay me every time!
If you cut within a hundredth on a dozer it's by accident. If a dozer cut is verified within a hundredth by a survey it's by accident. Dozer cuts are designed to the hundredth. The same GPS that controls the machine controls the rod man's topo shots.
Ohh your such a youngster, how the hell you think we did it before GPS and the survey team did not have GPS, think out side the box son, be a journeyman,be a professional, not a joystick jockey pushing a button, and when we blue topped within a hundredth it was no accident we were that good, we took pride in our ability to do so, but the lazy kids now days would have the computer do it because it's too hard, Damn right it's hard, we never let that stop us,, Having been on and used GPS they are only accurate within a tenth up or down ,that is a total of 2 tenths difference,something we never settled for, we were better!!
More like half a tenth, further, even if the grade man wasn't using GPS back when you were "grading within a hundredth" he was certainly using a transit and grade rod, and if that man holding the grade rod isn't literally perfect, your grade will be off by more than a hundredth. Sorry, but grading to 1/8th of an inch across and entire site never happened, and isn't going to. 3 hundredths, sure, but not 1.
Get the fuck outta here. Hahahaha. I'm sure you could grade 10 acres within a certified millionth of a foot. What a joke
How many wannabes do yous guys go through that say they can and don't know s***?