hello, i had a question, and would really appreciate if you answered. my question is, instead of using a push button switch, if i use a simple on-off switch. will the beeper keep beeping when the switch is on? or will it cause the circuit to break? please answer.
Dude more People will subscribe your channel only when you provide and share the detail circuit diagram and explanation.. Without that it is nothing like just showing off yourself....
Yes you can; (i mean, should be), because the transmitter transmits to 1 frequency, so all receivers who listen to that frequency will read the same message.
@@namapasaran4185 use encoder decoder pair for individual function. Then address them different so that you can use more than one rf pair with in same range & data will be followed by only decoders having same address as encoder.
I'm strugling to test my modules :( I connected te VCC and GND of transmitter to +/- 5V, then I connected VCC and GND of receiver to 5V. I connected LED (along with 330R) to DATA of receiver and to GND. LED is lighting all the time na matter what I do with transmitter (I tried connecting DATA of transmitter to +5V and to GND - nothing happens). I beg you - help me :) (I'm sitting with this for few hours now :( )
It is totally fake it can't work without 2 ics name ht12 d and ht12 e because when the signal will send they will encode and decode it Don't try this , this is fake 🥴
We ended up exchanging this model for the slimmer version ua-cam.com/users/postUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU because it was too wide for the only door trim area that made sense to mount it on. However, we should have just noted the dimensions prior to purchasing. Otherwise, we love the doorbell. It works perfectly, and the video is very clear, even at night.
If I wave my fingers by the antenna it makes the LED flash. There's lots of possibly interference here. Try a large capacitor between the data and ground and a resistor from data to ground. That's how i got mine working more smoothly
does this actually work without use of an encoder/decoder or micro controller? I have had no luck, if anyone has any insight to this I would love to hear.
Yep it'll work, but it you use without encoder decoder then the drawback is that if any other same frequency module (also without encoder decided) will be present in the range of your modules then both signal will get mixed up and each will be able to control both.
How much voltage will the Data Pin in the receiver produce? Will we get a constant 5V from the receiver if we didn’t keep any switch at the transmitter? I have been asking this question for the 10th time, can anyone please help me with these two questions....PLEASE🙏🏻🙏🏻
Po podlacz normalna antene odbiorcza to wszystkie sygnaly z 433 beda wzbudzac dzwonek.. A pasmo jest nieźle oblegane ( ja bez anteny odbieram z 6 transmisji..
@@pranavverma4049 yes it worked quite decent only not so good in house 50 ft (with obstacles) without obstacles its good for 50 feet, if you want to use it for commercial purposes like want to make product of it n sell to earn money then don't use this, this is good for personal home/college project only.
@@aloklakhera866 i am making a gsm based security system so i need a wireless communication system which can be used to operate my 5 v relay sooo can you plzz suggest me a budget friendly circuit for the same the range should be >=50 metres thanku
What is the use of posting this video without a detailed circuit diagram. For all I know it may not even work. I suppose the only benefit you get out of posting this video is that you can sit smugly and gloat over your own "achievement". If you are someone who doesn't want to share his knowledge, better keep it to yourself. I am sure they will hatch in due time.
Looks like a good project but please provide a wiring diagram!
Super. You make all the projects very easily using Basic electronics components. There is no any complex circuits.
Thanks
@@RJImagination
i need the circuit
Alternate title: how to scare birds using this simple contraption.
😂
woow super simple but amazing project. I'll also do it on my vlog. Thanks for the ideas.
Very nice video sir. It helped me a lot. Without using encoder and decoder we can use this modules.
Ye it will work or not
Wonderful. Great project as always. It's great as wire is very expensive today.
But on the minus side you've got to worry that radio waves carry the coronavirus just like 5G! :)
Hi, I try to made it but it's not working, may be something wrong. Can you make it one for me ? I have 2 set of them, I will send you those.
This is exactly what im making, Thanks for clarifying it!
I was wondering if there was an easy way to use these... awesome! Thanks!
Bro ye sach me work krta hai
@@iq5382 how much range it works?
Es realmente simple! Pero me encantó porque puedo agregar más componentes al circuito fácilmente. Gracias!!!
With single 18650 battery, how long it lasts?
are they paired or receiver can be controlled by other same transmiter? please reply thanks.
Please circuit dijiye or upload kijiye. Very interesting circuit & awesome one. Please answer me.
here LED we should give for both data pins or one is enough? it is not working
bro, how many meters is the distance between the receiver and transmitter?
Greeting from the UK. Good video. WOuld be great to put a small circuit diagram in the description :-)
Yes, please give the circuit diagram
Cool video shot, keep it up, thank you for sharing it :)
Hi, do you have video of turning this two boards into a remote power button for PC?
can i make one transmitter and multiple receiver using 433mhz module?
Sir range alter karne ke liye kya changes karna padega
I had 433 MHz tx and rx ,a red colour one should I use antenna for that or is it inbuilt.
You need to use a piece of insulated wire in sprin shape as antenna.
Sou Brasileiro de Campina Grande Paraíba. Vídeo maravilhoso.
Can you tell me what the current consumption of receiver module when ideal ON but not receiving anything?
Bro. Circuit digram please
hello, i had a question, and would really appreciate if you answered.
my question is, instead of using a push button switch, if i use a simple on-off switch. will the beeper keep beeping when the switch is on? or will it cause the circuit to break?
please answer.
Can anybody tell how much distance you will get? If it is based on antenna how much max you got
How much mm copper wire you used
Bhai iske range kitni hai
What's the cost of Transmitter & receiver module?
Chinese 60rs. Pair.
Less than $
Bro ye sach me work krta hai
Can I connect dc motor instead of bell?
Range kitna rahega?
I didn't understand the circuit soldering connection 🥲. Please give a link to the picture.
Dude more People will subscribe your channel only when you provide and share the detail circuit diagram and explanation.. Without that it is nothing like just showing off yourself....
hi, can i use this Rf one transmitter with multiple reciever?
Yes you can; (i mean, should be), because the transmitter transmits to 1 frequency, so all receivers who listen to that frequency will read the same message.
@@francescogramegna1107 thank you ❤️
@@francescogramegna1107 can i change the freq? Cause i want to use another module with other function
@@namapasaran4185 nope
@@namapasaran4185 use encoder decoder pair for individual function. Then address them different so that you can use more than one rf pair with in same range & data will be followed by only decoders having same address as encoder.
Good idea but one press one time bip
Bro I want to buy this project
Response me
Sir How many range does it work
I think one or more transmitters you have, can received by receiver, and than .....
How to use 2 rf transmitter and just 1 receiver that connect to arduino?
Thank you!
very nice
can I make with 315mhz rf transmitter and receiver
Yes you can.
Broo range kia hai meter may plz ans
does your neighbour can ring your bell if he has a pair of transmit&receiver ? are they encoded ?
If not using encoder decoder, then yes, he can. So use encoder decoder and address your pair uniquely.
I'm strugling to test my modules :(
I connected te VCC and GND of transmitter to +/- 5V, then I connected VCC and GND of receiver to 5V. I connected LED (along with 330R) to DATA of receiver and to GND.
LED is lighting all the time na matter what I do with transmitter (I tried connecting DATA of transmitter to +5V and to GND - nothing happens). I beg you - help me :) (I'm sitting with this for few hours now :( )
same i did the whole circuit like he did but some how the led and buzzer turns on while im not pressing the button
Yeah that's simple, I just got to buy one.
hi i tried exactly like this, but the led just blinked
Mine did the same
It is totally fake it can't work without 2 ics name ht12 d and ht12 e because when the signal will send they will encode and decode it
Don't try this , this is fake 🥴
We ended up exchanging this model for the slimmer version ua-cam.com/users/postUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU because it was too wide for the only door trim area that made sense to mount it on. However, we should have just noted the dimensions prior to purchasing. Otherwise, we love the doorbell. It works perfectly, and the video is very clear, even at night.
Sir can you provide the circuit diagram of the same? plz ❤️❤️
How much its range?
What does it mean,if the LED is flashing ,if switch is in off State...
If I wave my fingers by the antenna it makes the LED flash. There's lots of possibly interference here. Try a large capacitor between the data and ground and a resistor from data to ground. That's how i got mine working more smoothly
Very good nice can you do more vids just using those modules? Thanks a lot!!
Yes soon i ll update
@@RJImagination thank you very much sir... :)
does this actually work without use of an encoder/decoder or micro controller? I have had no luck, if anyone has any insight to this I would love to hear.
Yep it'll work, but it you use without encoder decoder then the drawback is that if any other same frequency module (also without encoder decided) will be present in the range of your modules then both signal will get mixed up and each will be able to control both.
Don't
Very good !
Sir.
Received and transmitter
कहा से खरीदे....????
Available on Amazon
Prise कितना he sir????
@@prashantwagh6159 buy from bm-es.com , 75/- INR starting rf module !
Why led does not shine?
how far can the signal travel with that coiln
do you schematic diagram?
E o diagrama? Faltou DIAGRAMA, FALTOU INFORMAR O ALCANCE, QUANTOS METROS?
By using two small breadboards no schematic would be needed ...
My LED is lit all the time. Does not really work.
What are the materials called?
my led just keep randomly changing the brightness (im not using a dorbell)
superbe mon frère
The transmitter has only one channel, plzz reply
It's multi channel.
Use encoder decoder to make it of more channel ! I know one ht12d (decoder) + ht12e (encoder) which will allow you upto 4 channels.
How much voltage will the Data Pin in the receiver produce?
Will we get a constant 5V from the receiver if we didn’t keep any switch at the transmitter?
I have been asking this question for the 10th time, can anyone please help me with these two questions....PLEASE🙏🏻🙏🏻
You tell us
its work?
how to increase distance
your like is also working on 433 Mz
ಚಂದ ಇದೆ
Bro soldering kaise kru
What kind of buzzer for 3.7V
Working distence plz?
Range kitani hai sir
Hey man, can you share the sketch, please?
Make a rc car from this circuit
super proste zastosowanie, takie lubię
Po podlacz normalna antene odbiorcza to wszystkie sygnaly z 433 beda wzbudzac dzwonek..
A pasmo jest nieźle oblegane ( ja bez anteny odbieram z 6 transmisji..
can you show your schematic diagram?
is more like morse ;)
Range of circuit
can u please share the circuit diagrams ?
Give the connection diagram in description
What its range
With antenna I tested around 50 feets.
How far is the connection?
With antenna I tested around 50 feet.
@@aloklakhera866 does it work ?
if it works them send me the circuit diagram on pranavverma020@gmail.com
@@pranavverma4049 yes it worked quite decent only not so good in house 50 ft (with obstacles) without obstacles its good for 50 feet, if you want to use it for commercial purposes like want to make product of it n sell to earn money then don't use this, this is good for personal home/college project only.
@@aloklakhera866 i am making a gsm based security system so i need a wireless communication system which can be used to operate my 5 v relay sooo can you plzz suggest me a budget friendly circuit for the same the range should be >=50 metres thanku
try it with syn115/480, not work
Bro circuit digram dal do
Sir I need ur little help plz help me
Yes please
Can I add one more switch and one more Bell in the same CIRCUIt .each switch joint with each Bell ,is it possible
i need the circuit
@@rahuldon4309 use encoder decoder ic pair for more than 1 channel.
@@aloklakhera866 can we talk?
Circuit diagram?
Range bro
Genius haha
I need circuit diagram pla
What is the use of posting this video without a detailed circuit diagram. For all I know it may not even work. I suppose the only benefit you get out of posting this video is that you can sit smugly and gloat over your own "achievement". If you are someone who doesn't want to share his knowledge, better keep it to yourself. I am sure they will hatch in due time.
It works!, i try it
Component
Led is not blinking 🚨
Range
The doorbell sounds like a chick crying
Please send circuit
need 2 boutons