Check for RF T1500.1bdCP Refurb Amps: is.gd/rft1500refurb Make sure you buy amp from authorized re-seller to get full warranty from Rockford Fosgate! Send me a few bucks if you want to support: paypal.me/BigDWiz My Favorite Screwdriver Kit: amzn.to/2FGD7dP Test Your Own Amps! SMD / D'Amore Engineering AMM-1: Amazon - amzn.to/2u2EgKV WCCarAudio - goo.gl/CVCgU3 Constant Power Technology Explained: ua-cam.com/video/7EP4-4TMWFw/v-deo.html Amps for Daily Driver Playlist: is.gd/dailydriveramps
Good day Mr wiz, my father gave me 2 rockford fosgate amplifiers the 55a2 and a 500a2 they are amazing amps, however my problem is that he lost the metal cap that normally cover the terminal and I am have a hard time to get them because I live in Jamaica. Do you have a link on how to get those caps?
I have a Rockford Fosgate t-1000-1bd not the bcdp model, and I've pushed it full tilt for over 8 years at 1 ohms running 2 p3 12" subs and it has never given me any issues. It is an absolute powerhouse of an amp and has never overheated. It's gotten really hot but never has gone into thermal protect mode ever. Truly na amazing amplifier
Fosgates expensive and people always say “you’re just paying for a name” I just tell them to listen to my mids and highs that my t400-4 is driving and their opinions always change
My first "good" amp I ever had was a punch 550.2. I was blown away by the difference of 600 watts rms compared to the 150 watts rms i was getting from my "1000 watt max" lanzer max.
Always loved the Rockford Fosgate amps. They have NEVER put out an amp with an output that was less than rated... always more...and a birth certificate to prove it. Thanks RF!
@@whikidfmj don't speak of what you don't understand. Rockford is and has been building some of the best amps on the market for decades. If you could start with a punch 45 and work to current you would be a fan as well.
Dude I don't care what anybody says you're the Best!!!! When it comes to any information on amps, power ratings,ect!! Anything you got to say is Good as Gold !!!!I'm a old school Bass head/SQ freak from back in the 90s.. Building a S/Q Van now at age 51... Love watching your videos at night. Keep up the good work Big D Wiz I'll always be a fan!!!
Had this amp for over 2 years now. Running 2 first gen 12in punch hx2s. Had the subs for about 16 years now and they've never sounded louder! Never gets hot at 1ohm. Hours of play at a time! Building a custom enclosure soon.
Fantastic amp. Buddy has been running this amp for 10 years no joke and it still works good as new. His birth sheet at 1ohm was little over 1900 watts rms as i recall.
How did he wire his amp from the box to the amp? Cause that's where I'm confused on this amp cause I have 2 15's and I was wondering do I wire my 2 subs to the amp in a mono load( + -) or( + -/+ -)
@@thcwolfs2598Got you Boss I see what you're saying now 😂 the 1st + and last- on the amp to get all the juice 😂 I might need to get another one of these powerhouses so I can have 2 😂 that'll be enough clean power for me, thank you.
Where you from bro I get most of my shith there since 2000 these maps are great iv had about 10 over the years an the 2500s to not r1s t2s an t3s. I got to the trip state mall store where u go ? An if u ever met isaac back in the day that my homie
I picked one of these bad boys up to power my RE Audio 15xx. Love that they come certified from the manufacturer. My specific specimen hit 1924watts @ 1ohm. I've smelled the burn on a couple punishing tracks.
Hands down imo the best sounding class d amp I’ve used on subs. I prefer a class a/b amp design, but I’d choose this again if I ran a class d. For the price vs actual power & in car output, it’s worth every penny. Big power, great test. Thank you once again D!!!
I just left you a lengthy inspirational comment on the new cab video. Now I'm watching this video for the 10th time drooling over this amp. It my absolute dream sub amp... lol I have 3 p3d2 Rockford 10s on an r1200-1d but I bet this thing would absolutely slam in my trunk!!!!!
my lady says why do i always watch these dumb videos . just love watching these videos to knws which company's give u best power for the money. keep em coming buddy.
You cant go wrong going with RF and JL Audio amplifiers. I have a RF T1500-bdcp pushing 12w7 in a spec ported box. Also, JL Audio XD 800/8v2 pushing a 3 way Hertz Millie Pro components, RF T2 tweeters and 2 way RE Audio XXX 6.5. components. They sound awesome.
Have a rockford fosgate p325.2 bridgable amp. Running a single 10 " sub. Bought this 13 years ago and still bangin im my single cab. Can testify. These amps are full of power and bullet proof. This amp has blown 2 subs over the years but she keeps doing the damn thang so shes gonna ride with me till the wheels fall off
My friend has one of these and he borrowed my kicker L7's (10's) and man. I've never heard them slap so hard, this amp is no joke. He's getting some Memphis M6 subs to compliment the new amp.
Great Video BigD! Ive shared this with you before..but a younger version of myself bought a Rockford Fosgate Power 800a.4 back in 1999 and installed in my Honda Accord..i later relocated it to my '01 truck..where it still sits ..and still works about like it did from day 1...nearly 20 years out of an amp..yeah it cost a few sheckles more than some of the competition..I think i paid ~ $670 back then..so $36 a year :-)...so happy with it i bought the T10004.ad for my new install.
@@ali19186 I tried it bro @ .08 ohms I believe and it ran like a champ!!! This amps are very powerful. But i sold it and now i own a Sundown SAZ 3500D and its the one they build here in US not the Korean ones. Im getting a Sundown Zv4 D1 this week I have my Custom box build already with a 8" aero port from Sky high Car Audio. Check out my Channel and stay tuned Ali. Hope you like what I have and what I build. Subscribe Me please Iwill appreciate it. Anyway i sold my T1500.1bdcp for $300 on offer up. Then I got my SAZ 3500D from a buddy of Derek from Sundown Audio for $450! I think I got a sweet deal for being the very first ones they build here in US. Then after so much requests they had to make them in Korea to manufacture more. But those dont do 18v like the one i have. Dont get me wrong they are still a beast but with cheaper parts.
I'm going to be running 2 of these in my new build on 2 soundqubed hds312's at 1 ohm with 2 rockford fosgate t400-4 on my mids and highs in the back of a 2023 hyundai tucson limited
rockford Has always been good stuff lost a little respect for them when best buy started selling them I got r1200 1d and love it keep videos coming big d
Thanks for another great vid big D! PiP of the current simultaneously with the dyno display really makes a difference. Thanks for the tech tutorial at the beginning I was not aware of that type of power supply. I've never been an RF guy but there's no arguing with the quality of their products. That black finish and honeycomb heatsink is great to look at too
I have, just didn't think about Brazilian amps since I'm out right not interested in them. But that is correct they use even less components for that amount of wattage.
Yo Big! So I was looking at this amp to go with the RF P3 loaded enclosure stock wired to 1ohm but after seeing this IDK.... think it's too much power for those subs? 2400w max but with these amp numbers.... help? Thanks!
My buddy has this amp. It is great and i love the technology in it where it stabilizes the power so it keeps loss from impedance rise to a minimum. But....the price tag is extreme. So my question is...are there any more affordable amps in the 1800 to 2000rms range that are comparable with similar technology and sq but at a cheaper price??
Great video I got this amp and holy smokes. The bass knob is not a regular style bass knob it dowsnt turn your bass down but is a bass boot so when older songs without bass comes on you can bring the bass out of them by turning up the knob
This goes to show, Rockford still builds great products. (I know this video is older but nothing has changed with Rockford's quality). I have heard only old people like Rockford. Well guess I'm old then bcuz I still like Rockford.
Hey D! Great test. This imo is hands down the best sounding class d amp I’ve heard & the only I’d ever use. I didn’t read all the comments but when I bought my 1500bdcp from a local shop it had the rem bass control in the box under the amp in the plastic bag. Maybe it’s just me, but the sound out of the 1500 seems better than the 2500. I was wondering if you’d like to test my 1000-4 class A/B from 2009. I’d like to see how it compares to the older 1000c. Let me know, thanks for another great video. P.S.This amp ran the heck out of American bass HD’s with no problem, well worth the money IMO.
Yes, but these tests are using test tones, not music. A good average is 1/2 of what I show for current consumption should be available for loud music playback (100 amperes). With an amp like this a minimum of an extra battery is required.
Thank you Big D Wiz... I appreciate the help. I have a Rockford T1500 bd for my P3 12s and a P600x4 for my mids and highs the p600x4 has 771 rms and the t1500 has 1899 rms and I also have the sony stereo with the built in 160rms 4 channel amp. Do you think a 220 amp alternator would be enough with a big 3 upgrade?..
One of my cars I barely drive is a 2005 Buick Park Ave. I decided last weekend to put two Kicker 15 CVR's I had laying around I forgot I had this T1500 I only tested it years back and didn't use it. I finally hooked it up to the two 15 CVR's with a Rockford R2 300X 4 ch. Hitting really hard.
I know I’m VERY late to this video and I’m slightly embarrassed for not seeing this review. I’ve never a big fan of Rockford amps guy but these ‘T’ lines of amps are legit. Nice review big guy$
Fun fact: Rockford Fosgate stereos are a factory option on many Mitsubishi vehicles (and probably the best OEM stereo system I've ever heard). I almost bought a Lancer about 10 years ago just because the factory RF stereo sounded so good.
Hey D! I was wondering if that was a used or refurbed amp because when I purchased my 1500bdcp’s each came with the remote bass knob. Another thing... imo this is hands down the best sounding class D amp out there, and I’m not a class D fan. But especially in the RMS, dynamic power & SQ combined these amps really crush it compared to most if not all. Hope all is well!
Thanks again for the advice on the JL 500/1 pricing. I hooked it up today. I nearly had a heart attack when I forgot the amplifier input sensor was on and no power😞. Problem solved. It's a banger!
I know this video is a bit dated but I was wondering if you would test a T1500.1 bdcp at 16 volt my manual says it can run at 16 volts also curious why amps are rated at 40hz my fosgate birthsheet shows over 1500 watts at 20hz
I believe you are familiar with jay laventure? Would you recommend him to do the work on the optidrive 6200? Sorry for the questions ....20 years of car audio I never had an issue with an amp. So I’m lost on repairing.Thank you very much for your time and input.
on rockford’s website, they say the amp is NOT bridgeable… yet @2:06 you say that the amp has an input AND output to pass signal to another amplifier. does that mean you can stack two t1500’s for a total of 3000 watts rms or no? my ignorance is partly due to my confusion of bridging amps and stacking amps. any help would be appreciated!!
I have a fosgate T500bd1 power amp. 1 svc kicker comp 12 n 1 planet audio dvc 12. What's the best way to hook them up together for the best bass. Currently the dvc is wired to 2 ohm and the kicker is wired to it regular, which runs to amp... connected to both A&B... both neg. N both pos. Ran together. So I have a jumper on the amp... A n B pos.... and A n B neg.... ran to the dvc.... connected to svc in 1 audio pipe box... not ported.
I just bought one of these to power my Sundown X8v3’s due to your review. Thank you! Do you have any plans to test the T1000-4ad or T800-4ad? Curious how they hold up in a SQ set up.
I'm running this amp with my 2 15s at 2 ohms and it goes off by far the best amp I have ever owned and have had it over 10 yrs now and wouldn't trade it for the world its birth certificate says it's rated at 1,960 watts
In parallel if your subs are dual voice coils take a jumper from 1 positive to 1 negative on 1 sub and that will leave you 1 positive and negative do the same on the other sub and that will leave you just 2 positives and 2 negatives and just hook the positives together and the 2 negatives together and run the 2 wires to the amp and if that sounds confusing just look up how to wire subs on here if that is easier homie
Ive got a 1500 bd im fixing to run a pair of old school punch hx2 10s on. Whats the difference in the bd and bdcp? Wanted to run them at 4 ohms for around 1000w rms and really good efficiency.
Hi D! Got a little dilemma, I'm bout to start the install and I'm not sure Which one should I choose to run JL 12w7 1000rms 3ohm sub, RF T2000-1BD or RF T1500-1BDCP?
Hey BigD, I just bought a new Orion Cobalt amp to upgrade from a cheap Insignia (Best Buy's house brand) 1200w monoblock that I was using. I was wondering if I could send you the Insignia amp and have you do an amp dyno and make a video on it, I'm curious to know what it actually was putting out
I don't see any links to tests of the other amps. That CP tech is really cool. But, it is designed to run your speakers as hard as it can, which can blow speakers. It requires a little extra tuning.
I'm in the market for an SQ geared but affordable 1500-2k amp and I'm looking at the JL rd1500/1. I saw you did the rd1000 but I'd really love to see you test the rd1500. I think a lot of people would appreciate it because it seems to be a very solid amp and they can be bought for 569.99 new from many vendors.
I've got a full Rockford system t1 subs and t1 amp and i can honestly say i am gonna rip their crap out of my truck and im going to rebuild it with a street set up and can guarantee my street setup will be 50 times better then their over priced garbage. massive audio xl and sundown here i come. by the way great videos ive actually watched quite a few of your amp test and your videos is actually helping me decide what my street setup will be thanks man👍🏽👍🏽
@John Cox lol technology has came far buddy sundown makes a 9x9 amp and is putting out 3 times more power then that Rockford you've got and guarantee draws low voltage. sundown fbs 3000 look it up you might change your mind about rockcrap.
Planning on getting two 12in t1d212 and this Amp do you think that's a good match on power between the 2 subs and this Amp.. any feedback would be great 👍
Great video! I am currently running an Alpine PDX-M12 (1200 watts RMS 2-4 ohms) to a JL Audio 12W7. If I was going to upgrade it would be amp. I still have a RF Punch P500X1BD and it slams the heck out of my 12" RF P3. I will buy this amp first before JLAudio 1200/1v3, which cost almost $400 more.
![Big Money, but Why? Rockford Fosgate T2500-1BDcp Power Series Amplifier Review Amp Dyno Test [4K]](http://i.ytimg.com/vi/2L8ORrq7sp8/mqdefault.jpg)
![Big Money, but Why? Rockford Fosgate T2500-1BDcp Power Series Amplifier Review Amp Dyno Test [4K]](/img/tr.png)
Check for RF T1500.1bdCP Refurb Amps: is.gd/rft1500refurb
Make sure you buy amp from authorized re-seller to get full warranty from Rockford Fosgate!
Send me a few bucks if you want to support: paypal.me/BigDWiz
My Favorite Screwdriver Kit: amzn.to/2FGD7dP
Test Your Own Amps! SMD / D'Amore Engineering AMM-1:
Amazon - amzn.to/2u2EgKV
WCCarAudio - goo.gl/CVCgU3
Constant Power Technology Explained: ua-cam.com/video/7EP4-4TMWFw/v-deo.html
Amps for Daily Driver Playlist: is.gd/dailydriveramps
BigDWiz I
You should do an Orion xtr 1500.1dz
Good day Mr wiz, my father gave me 2 rockford fosgate amplifiers the 55a2 and a 500a2 they are amazing amps, however my problem is that he lost the metal cap that normally cover the terminal and I am have a hard time to get them because I live in Jamaica. Do you have a link on how to get those caps?
Jermaine Mcdonald here's a link to 3d printed end caps. They are plastic but looks nice
Do a scv 3k review
I have a Rockford Fosgate t-1000-1bd not the bcdp model, and I've pushed it full tilt for over 8 years at 1 ohms running 2 p3 12" subs and it has never given me any issues. It is an absolute powerhouse of an amp and has never overheated. It's gotten really hot but never has gone into thermal protect mode ever. Truly na amazing amplifier
😂🤣
Something about running a Rockford feels so Coooool!! Still have my P325.1 from High School. My first amp that got me hooked for life!
Fosgates expensive and people always say “you’re just paying for a name” I just tell them to listen to my mids and highs that my t400-4 is driving and their opinions always change
I still have a punch 45 from high school running a pro punch 12. Loved that setup
My first "good" amp I ever had was a punch 550.2. I was blown away by the difference of 600 watts rms compared to the 150 watts rms i was getting from my "1000 watt max" lanzer max.
There so reliable knoc on internet wood i haven't had one failed me yet and I have been rocking them since high-school
I ran a 45hd in highschool and a 1000.1bd now on 2 sundown 8s in my truck and you would think I have 15s
My favorite sub amp hands down. I've had 3 and never had issues even during 100 degree temps driving multiple subs
Cook a egg on them an never clipped
Always loved the Rockford Fosgate amps. They have NEVER put out an amp with an output that was less than rated... always more...and a birth certificate to prove it. Thanks RF!
This is so true...
Sundown couldn't even say that. Might sting some of the fanbois...
George Srisomsak it’s amazing how you’re hating any chance you get. 🤣 Try doing something positive for once with your life.
@@ThisGuyDrives quite down fan boy, your nutt huggery is distracting me from my warrented criticism.
That's because Rockford really cares about bass
Thanks for all your input and videos on all of the OLD SCHOOL AUDIO, it keeps older dudes like me YOUNG...!
Thanks a million...!
Thanks for watching and commenting!
Forever a Fosgate fan. Might cost more but they are reliable and they are just killer amps. My two cents. Cool vid Big D. 'I'm outta heeeeere..!!'
Thanks for watching and commenting 👌
I love the fact that they are under rated
@@dhestondh so under rated they don't even include a remote with their remote capable 800$ amp🤣 those things are over rated anyway.
@@whikidfmj don't speak of what you don't understand. Rockford is and has been building some of the best amps on the market for decades. If you could start with a punch 45 and work to current you would be a fan as well.
Dude I don't care what anybody says you're the Best!!!! When it comes to any information on amps, power ratings,ect!! Anything you got to say is Good as Gold !!!!I'm a old school Bass head/SQ freak from back in the 90s.. Building a S/Q Van now at age 51... Love watching your videos at night. Keep up the good work Big D Wiz I'll always be a fan!!!
Thanks for watching and commenting!
Have to respect the brand that started it all! Thank God for Jim Fosgate!
He sold the company like 30 years ago
Yeah he must be young 😂😂😂
and that's why until today these amps are still my favorites,
love rockford fosgate .
Had this amp for over 2 years now. Running 2 first gen 12in punch hx2s. Had the subs for about 16 years now and they've never sounded louder! Never gets hot at 1ohm. Hours of play at a time! Building a custom enclosure soon.
Just killing it with the picture in picture bro! Nice work :)
Thanks for making me a believer again..you restored my faith in fosgate again
I’m not on their payroll, but I am a certified #FosgateFanatic 😊
Fantastic amp. Buddy has been running this amp for 10 years no joke and it still works good as new. His birth sheet at 1ohm was little over 1900 watts rms as i recall.
How did he wire his amp from the box to the amp? Cause that's where I'm confused on this amp cause I have 2 15's and I was wondering do I wire my 2 subs to the amp in a mono load( + -) or( + -/+ -)
@@jefferyglover4295 I run both my 15s 1st + and 4th - for all the juice🤟
@@thcwolfs2598Got you Boss I see what you're saying now 😂 the 1st + and last- on the amp to get all the juice 😂 I might need to get another one of these powerhouses so I can have 2 😂 that'll be enough clean power for me, thank you.
Before I buy any amp I come to this channel!!!! You cant go wrong with Rockford they the truth!!!
Keep em comin' Big D!! Love these vids!
Thanks brother 🤙
BigD, thanks for doing this test. I actually purchased one of these from SoundOfTriState. It's a monster amp. Can't wait for the listening tests!
SOTS is my new favorite web store 👌😬
Where you from bro I get most of my shith there since 2000 these maps are great iv had about 10 over the years an the 2500s to not r1s t2s an t3s. I got to the trip state mall store where u go ? An if u ever met isaac back in the day that my homie
Can't wait for the Rockville amp test. Thanks for your videos
I picked one of these bad boys up to power my RE Audio 15xx. Love that they come certified from the manufacturer. My specific specimen hit 1924watts @ 1ohm. I've smelled the burn on a couple punishing tracks.
Man you got a strong one 💪
Hands down imo the best sounding class d amp I’ve used on subs. I prefer a class a/b amp design, but I’d choose this again if I ran a class d. For the price vs actual power & in car output, it’s worth every penny. Big power, great test. Thank you once again D!!!
I have one of these sitting in my garage as a backup. I did not realize it was a power-house (never hooked up). Thanks for the video BigDWiz!
Yeah boi 😬
Dude you should sell it to me... lol it's my dream amp. Wife would kill me if I spent 800 on it. Lol
@@devillenm5525 just bought this without my wife knowing lol. Keep your accounts separate if you can lol.
I just left you a lengthy inspirational comment on the new cab video. Now I'm watching this video for the 10th time drooling over this amp. It my absolute dream sub amp... lol I have 3 p3d2 Rockford 10s on an r1200-1d but I bet this thing would absolutely slam in my trunk!!!!!
my lady says why do i always watch these dumb videos . just love watching these videos to knws which company's give u best power for the money. keep em coming buddy.
Alot more to good sounding amp than just power. The damping factor is also very important
Getcha a new lady
Same!!! She calls them my "girlfriend" lmao she just don't understand
Tell her nearly 3,300W from a 1500W amp! Knowledge is power :)
Your lady crazy
You cant go wrong going with RF and JL Audio amplifiers.
I have a RF T1500-bdcp pushing 12w7 in a spec ported box. Also, JL Audio XD 800/8v2 pushing a 3 way Hertz Millie Pro components, RF T2 tweeters and 2 way RE Audio XXX 6.5. components. They sound awesome.
It's good to see you back big D hope your buddy is doing ok.
Some of the best amplifiers on the market
Tried and true in Meade’s vehicles
Finally an amp I own!
I just got a P600X4 and its awesome!
Rockford fosgate can't go wrong always good
Agreed 👍
I give them big props for not cheaping out on build quality as time goes on.
verpriced..not .5 stable. Meh
@@casemods this is for sq not spl you don't need to go down to 0.5 ohms..
Besides their subs. They are overpriced junk. Good sq though, but not good for output.
Have a rockford fosgate p325.2 bridgable amp. Running a single 10 " sub. Bought this 13 years ago and still bangin im my single cab. Can testify. These amps are full of power and bullet proof. This amp has blown 2 subs over the years but she keeps doing the damn thang so shes gonna ride with me till the wheels fall off
My friend has one of these and he borrowed my kicker L7's (10's) and man. I've never heard them slap so hard, this amp is no joke. He's getting some Memphis M6 subs to compliment the new amp.
Thank you for showing the power of the Rockford amplifier I appreciate everything you do on your UA-cam
Great Video BigD!
Ive shared this with you before..but a younger version of myself bought a Rockford Fosgate Power 800a.4 back in 1999 and installed in my Honda Accord..i later relocated it to my '01 truck..where it still sits ..and still works about like it did from day 1...nearly 20 years out of an amp..yeah it cost a few sheckles more than some of the competition..I think i paid ~ $670 back then..so $36 a year :-)...so happy with it i bought the T10004.ad for my new install.
@@herbyverstink why not the t-1500?
I love your sidekick at the end brotha! Awesome dyno. Thanks for keeping it real like you always do 👍
about time! i own this one and still rock it out!
Yeah boi 👌
I used one of these on a 13w7 wired to .75 for months. No issues except for the jl not liking all that power.
I have a sundown zv4 D1 how can i run it to .75 on this T1500.1bdcp
Juan Macias I thn
Think you would go low as .5
Just got one and thinking about getting an amp
@@ali19186 I tried it bro @ .08 ohms I believe and it ran like a champ!!! This amps are very powerful. But i sold it and now i own a Sundown SAZ 3500D and its the one they build here in US not the Korean ones. Im getting a Sundown Zv4 D1 this week I have my Custom box build already with a 8" aero port from Sky high Car Audio. Check out my Channel and stay tuned Ali. Hope you like what I have and what I build. Subscribe Me please Iwill appreciate it. Anyway i sold my T1500.1bdcp for $300 on offer up. Then I got my SAZ 3500D from a buddy of Derek from Sundown Audio for $450! I think I got a sweet deal for being the very first ones they build here in US. Then after so much requests they had to make them in Korea to manufacture more. But those dont do 18v like the one i have. Dont get me wrong they are still a beast but with cheaper parts.
THANKS TO YOUR REVIEWS I BOUGHT THIS AMP AND THE T1 12 INCH SUB FOR MY 2015 HONDA CIVIC SI COUPE...THANKS KEEP UP THE GREAT REVIEWS....G.B.Y.
👌😬👍
Sound of tri state is down the road from me. Best car audio installers an sellers in state of Delaware hands down
I've yet to own a Rockford Fosgate amp. I wouldn't hesitate to buy one after seeing all these dyno test.
Rockford Fosgate has always had sexy amplifier insides. I remember the Punch 45 driving two punch 12"s was amazing back in the day.
Yessir, those are still some of my favorite designs
I'm going to be running 2 of these in my new build on 2 soundqubed hds312's at 1 ohm with 2 rockford fosgate t400-4 on my mids and highs in the back of a 2023 hyundai tucson limited
First I hit that like button then I get to watch it! BigD for D Win!
By far my favorite Amp there is really no comparison I’ve played these amps for hours at max and have never let me down
rockford Has always been good stuff lost a little respect for them when best buy started selling them I got r1200 1d and love it keep videos coming big d
Oh yeah boi 🤙
Thanks for another great vid big D! PiP of the current simultaneously with the dyno display really makes a difference.
Thanks for the tech tutorial at the beginning I was not aware of that type of power supply. I've never been an RF guy but there's no arguing with the quality of their products. That black finish and honeycomb heatsink is great to look at too
Like seeing those good quality Nippon caps in amps. This amps looks like it would last for a good while.
Been waiting for this. Thank you! I have been driving myself crazy trying to decide between this amp and the jl slash 1000/1 for my w7.
Im runnin a 13w7 wired to 2.5 ohms and it kicks ass
@@travishulse3449 how is it wired to 2.5 when it’s a 1.5 DVC? Wouldn’t it be .75 or 3?
What amp did you decide to go with?
Oooh yeah watching @BigDWiz and rocking my oss t-shirt. Great video BigD
Rockford amps are monster!!!
Love seeing amp guts, I'm amazed Rockford can make a 3000 watt amp with half the components other brands need to make the same wattage.
Celeste McCoy apparently you've never seen the guts of Brazilian amps
I have, just didn't think about Brazilian amps since I'm out right not interested in them. But that is correct they use even less components for that amount of wattage.
Celeste McCoy interested or not they're still doing it on less components and way less power
You get what you pay for.
but the rockford can last all day the Brazilians not so much, also sound like a vacuum cleaner
I love rockford and love that their amps do rated power, but this is how you blow subs
Yo Big! So I was looking at this amp to go with the RF P3 loaded enclosure stock wired to 1ohm but after seeing this IDK.... think it's too much power for those subs? 2400w max but with these amp numbers.... help? Thanks!
Freaking awesome video my friend. Thanks for the info on the constant power concept too
Brian Miles Gamecocks in the house! 👍
PalmettoMoon Gamecocks for the win!
Brian Miles You know it!
“Is this your last one “
Every bassheads daughter 🤣
im so sorry, i bought an amp without reading the affiliate link in the description prior :( i love your vids
Another great old school stereo .com video!!! Im outta hheeeeerrreeee!!!!Thanks D wiz wanted to see one of these bad boys in action!!!
My buddy has this amp. It is great and i love the technology in it where it stabilizes the power so it keeps loss from impedance rise to a minimum. But....the price tag is extreme. So my question is...are there any more affordable amps in the 1800 to 2000rms range that are comparable with similar technology and sq but at a cheaper price??
Check helix m series
Keep the good stuff rolling. I love the Rockford Fosgate.
Thanks for watching and commenting 🤙
Great video I got this amp and holy smokes. The bass knob is not a regular style bass knob it dowsnt turn your bass down but is a bass boot so when older songs without bass comes on you can bring the bass out of them by turning up the knob
Can i wire it 0.5ohm with good electrical?
This goes to show, Rockford still builds great products. (I know this video is older but nothing has changed with Rockford's quality). I have heard only old people like Rockford. Well guess I'm old then bcuz I still like Rockford.
Hey D! Great test. This imo is hands down the best sounding class d amp I’ve heard & the only I’d ever use. I didn’t read all the comments but when I bought my 1500bdcp from a local shop it had the rem bass control in the box under the amp in the plastic bag. Maybe it’s just me, but the sound out of the 1500 seems better than the 2500. I was wondering if you’d like to test my 1000-4 class A/B from 2009. I’d like to see how it compares to the older 1000c. Let me know, thanks for another great video.
P.S.This amp ran the heck out of American bass HD’s with no problem, well worth the money IMO.
I'm kinda new to the audio world.
Does the 202 on the meter mean it pulls 202 amps from the alternator or what?
Yes, but these tests are using test tones, not music. A good average is 1/2 of what I show for current consumption should be available for loud music playback (100 amperes). With an amp like this a minimum of an extra battery is required.
Thank you Big D Wiz...
I appreciate the help.
I have a Rockford T1500 bd for my P3 12s and a P600x4 for my mids and highs the p600x4 has 771 rms and the t1500 has 1899 rms and I also have the sony stereo with the built in 160rms 4 channel amp.
Do you think a 220 amp alternator would be enough with a big 3 upgrade?..
I still got my power 10001 bd that was made in Tempe Arizona.
That intro beat is TIGHT!
I just bought this amp and put it on two 15 inch Kicker Solos And this thing freaking pounds. It’s a great amp
would my t1500.1bd be okay at 0.5ohm?? need help here please
With box rise maybe. I’d monitor it closely
Love seeing that 14-16 gauge remote input. Someone needs to tell companies that 8-4 gauge prolly isn’t necessary.
Thank God for these dyno tests
One of my cars I barely drive is a 2005 Buick Park Ave. I decided last weekend to put two Kicker 15 CVR's I had laying around I forgot I had this T1500 I only tested it years back and didn't use it. I finally hooked it up to the two 15 CVR's with a Rockford R2 300X 4 ch. Hitting really hard.
I had a T-1000.1 1ohm stable pushing an 18 inch power hx2 for the longest had an coil issue gonna have sub built even better
I know I’m VERY late to this video and I’m slightly embarrassed for not seeing this review. I’ve never a big fan of Rockford amps guy but these ‘T’ lines of amps are legit. Nice review big guy$
Fun fact: Rockford Fosgate stereos are a factory option on many Mitsubishi vehicles (and probably the best OEM stereo system I've ever heard). I almost bought a Lancer about 10 years ago just because the factory RF stereo sounded so good.
It’s true but the upgrades factory systems are in most cases nowhere near as good as a decent upgrade using quality components.
Hey D! I was wondering if that was a used or refurbed amp because when I purchased my 1500bdcp’s each came with the remote bass knob. Another thing... imo this is hands down the best sounding class D amp out there, and I’m not a class D fan. But especially in the RMS, dynamic power & SQ combined these amps really crush it compared to most if not all. Hope all is well!
Thanks again for the advice on the JL 500/1 pricing. I hooked it up today. I nearly had a heart attack when I forgot the amplifier input sensor was on and no power😞.
Problem solved. It's a banger!
Awesome 👏
I know this video is a bit dated but I was wondering if you would test a T1500.1 bdcp at 16 volt my manual says it can run at 16 volts also curious why amps are rated at 40hz my fosgate birthsheet shows over 1500 watts at 20hz
WHAT IF IT DON'T COME WITH A BIRTHSHEET?
You should do a dyno on a kicker kxa800.1
I believe you are familiar with jay laventure? Would you recommend him to do the work on the optidrive 6200? Sorry for the questions ....20 years of car audio I never had an issue with an amp. So I’m lost on repairing.Thank you very much for your time and input.
Great workhorse amp I have 2 1000.1 BDCP’s and also bought them at sound or tri-state.
My favorite part of this video if the F50 model!
AWESOME VIDEO AS ALWAYS BROTHER
on rockford’s website, they say the amp is NOT bridgeable… yet @2:06 you say that the amp has an input AND output to pass signal to another amplifier. does that mean you can stack two t1500’s for a total of 3000 watts rms or no? my ignorance is partly due to my confusion of bridging amps and stacking amps. any help would be appreciated!!
Amp has pass thru for RCAs, but is not linkable. You can use two amps, but not "link" them together to use as one
Bigdwiz your the man juJust wondering what is your opinion on the Power T1000 I bought that amp and 2 P3 12’ what do you think
Thanks for the info...I did not know they make speakers for the car..phase linear speakers look awesome. Any experience with them? Thanks
I have a fosgate T500bd1 power amp. 1 svc kicker comp 12 n 1 planet audio dvc 12. What's the best way to hook them up together for the best bass. Currently the dvc is wired to 2 ohm and the kicker is wired to it regular, which runs to amp... connected to both A&B... both neg. N both pos. Ran together. So I have a jumper on the amp... A n B pos.... and A n B neg.... ran to the dvc.... connected to svc in 1 audio pipe box... not ported.
And it hits pretty hard, just wondering if I have it right???
I just bought one of these to power my Sundown X8v3’s due to your review. Thank you! Do you have any plans to test the T1000-4ad or T800-4ad? Curious how they hold up in a SQ set up.
No immediate plans, but you never know what’s upcoming...
I have this amp on 2 12” type R, I want to upgrade the subs, what would be perfect subs for this amp ?
Derek have you ever done an amp dyno test with capacitors and super caps to see what the difference is when you don't use them on the dyno
I'm running this amp with my 2 15s at 2 ohms and it goes off by far the best amp I have ever owned and have had it over 10 yrs now and wouldn't trade it for the world its birth certificate says it's rated at 1,960 watts
How do you have your 2 subs ran from the speaker box to the amp? I'm confused on this 4 output on a mono block amp.
The booklet says it's internally in parallel mode on the inside the amp and I was just wondering how do I hook my 2 subs up like you did Boss.
In parallel if your subs are dual voice coils take a jumper from 1 positive to 1 negative on 1 sub and that will leave you 1 positive and negative do the same on the other sub and that will leave you just 2 positives and 2 negatives and just hook the positives together and the 2 negatives together and run the 2 wires to the amp and if that sounds confusing just look up how to wire subs on here if that is easier homie
@@MrLow86 Thank you Boss
Ive got a 1500 bd im fixing to run a pair of old school punch hx2 10s on. Whats the difference in the bd and bdcp? Wanted to run them at 4 ohms for around 1000w rms and really good efficiency.
Hi D! Got a little dilemma, I'm bout to start the install and I'm not sure Which one should I choose to run JL 12w7 1000rms 3ohm sub, RF T2000-1BD or RF T1500-1BDCP?
Hey BigD, I just bought a new Orion Cobalt amp to upgrade from a cheap Insignia (Best Buy's house brand) 1200w monoblock that I was using. I was wondering if I could send you the Insignia amp and have you do an amp dyno and make a video on it, I'm curious to know what it actually was putting out
Just wondering would this be too much to put 1, on each of my Brazilian 15's gold
This is why I'm a Rockford Fosgate fan boi.
👌😊👍
I don't see any links to tests of the other amps.
That CP tech is really cool. But, it is designed to run your speakers as hard as it can, which can blow speakers. It requires a little extra tuning.
You have any information on the Punch 801s?
I'm in the market for an SQ geared but affordable 1500-2k amp and I'm looking at the JL rd1500/1. I saw you did the rd1000 but I'd really love to see you test the rd1500. I think a lot of people would appreciate it because it seems to be a very solid amp and they can be bought for 569.99 new from many vendors.
Just get this one. You won't be disappointed
I've got a full Rockford system t1 subs and t1 amp and i can honestly say i am gonna rip their crap out of my truck and im going to rebuild it with a street set up and can guarantee my street setup will be 50 times better then their over priced garbage. massive audio xl and sundown here i come. by the way great videos ive actually watched quite a few of your amp test and your videos is actually helping me decide what my street setup will be thanks man👍🏽👍🏽
@John Cox lol technology has came far buddy sundown makes a 9x9 amp and is putting out 3 times more power then that Rockford you've got and guarantee draws low voltage. sundown fbs 3000 look it up you might change your mind about rockcrap.
Planning on getting two 12in t1d212 and this Amp do you think that's a good match on power between the 2 subs and this Amp.. any feedback would be great 👍
Great video!
I am currently running an Alpine PDX-M12 (1200 watts RMS 2-4 ohms) to a JL Audio 12W7. If I was going to upgrade it would be amp.
I still have a RF Punch P500X1BD and it slams the heck out of my 12" RF P3.
I will buy this amp first before JLAudio 1200/1v3, which cost almost $400 more.
Big D. If you ever get a chance, please dyno the Soundqubed 4500.1 please!
We shall see sir...
Thanks so much for the possibility! Thanks Big D!!!