i've been back & forth to a bunch of other youtubers doing "tutorials" and i LOVE how you don't clutter your videos with talking. thank you for keeping it simple. great post btw!
Great video. When I got done with the watch band I made a bracelet for giggles. I did this for a plastic Casio watch, needed to grind out quite a bit between the lugs using a Dremel and even at that I could only get three strands behind the pins but it doesn't seem like a problem. Excellent instruction and very good music which made the inevitable rewatchings no problemo. Liked and subbed.
¡Listo! Lo acabo de terminar hace minutos y quedó excelente. Muchas gracias Paracord 101 por este tutorial. ÉXITO. Saludos desde Caracas, Venezuela 27/05/2019 :)
Awesome, I’ve been trying to think of a way to craft a bracelet for a sport watch with a broken rubber/plastic/crappy band. Thanks for sharing your technique.
If you started at the watch and tied toward both buckles you could change the battery more easily. Nice work, a good choice as that knot is soft and flexible.
Greg Stewart To change the battery all he has to do is remove one of the pins. The strap will keep its shape after it's worn for a few days. The idea here is to have one continuous length of paracord if needed. Another benefit of doing it this way is if one of the pins breaks while it's being worn, the watch and strap will stay attached to your wrist. If it's 2 separate bands and a pin breaks the watch falls to the ground, possibly cracking the crystal or damaging the case. It's being done like this intentionally. True your way is easier to change the battery, but it's only about 20-30 seconds faster.
Watched the video couple times and made it...cut a lot out of the Casio like mentioned previously. Easy to follow and looked great. Thanks for the detail PC101. Todd - Of mention in description, Stormdrane is David Hopper, not Dennis.
Really nice video, but you could show how make it without your holder. I made this splice with few problems because of lack of tips. I had to combined a lot but finally my watch looks great. Thanks
Hi! I really liked this instructions. Out of curiosity, do you have any instructions on how to make the bracelet you show at the end of the video? the one that is blue and yellow?? Thanks in advance.
Nice job on video. Would you recommend (as some book do) to first wet the paracord and hang to dry to allow for shrinkage before doing this kind of work?
Geoff Moore Also if it's one continuous length and you need 6 feet of paracord you have it. If it's in 2 separate sections all you have is a couple of 4 foot sections. Also the watch could be damaged if one of the pins breaks and the watch takes a 4 ft trip to the pavement.
How many inches did you set the jig for? Telling us you just measured your wrist and go from that is not good enough. It seems to me that the length will also affect how you measure out the starting run of three strands. A LITTLE bit of talk and explanation would be nice.
Hi, is it possible to put survival gear in this band? And possibly weave in a compass and thermometer designed to slide on regular watchbands? Great project, thanks for sharing.
How did you make that adjustable base? Been trying to see how I make one for the bracelets that don't use clips so that I can have the ends held tight but at a closer distance
The instructions I had told me to thread the cord under the pins of the watch...... next time I will use your trick and remove the pins first, haha. Thankfully everything worked just fine, but your way looks a lot simpler to accomplish:-).
You must have practiced a lot because I just did this for my first time and it came out sloppy. Your icon picture in the beginning looks amazing! I'll just have to do it all again. Then again. Then maybe one more time. I did notice that this cord has directions on it. Like as you wrap one string around another, you can tell it wants to tangle sometimes or it wants to go in that direction. I think with a little more string taught it could look nicer.
Yes , I do practice and I have made thousands of paracord bracelets. So, I hope I know what I am doing. Thanks for watching! The longer the cord is, the more likely it will tangle. It is a part of paracording.
Nice, I love the look of this weave. I'm making a belt (I think the weave I've been using is called the slatts weave), but I hate that it's asymmetrical. Is there a way to make this wider for a belt?
I like how u did this but i wanted to do this with my ka-bar knife sheath so that i can wrap it around my leg and it doesnt have pins that i can take off to attach the strap to ,and is there any other way i could do it?
muito bom amigo gostei muito do seu vídeo agora posso arrumar a pulseira do meu relógio, quando eu fizer mando pra você uma foto, já estou inscrito no seu canal. Abraços
Hi, i am from south america, it has been impossible to get these implements, even on internet, you know what i mean, onlne store. Could you help me please.
I have a question: if I wanted to sell paracord bracelets of different designs in a craft store or at a public event, are there legal limitations I'd have to follow for that?
+Mugly Mae The proper etiquette is to site the designer by first, last name and where the design can be located. Feel free to use my designs if you choose to make and sell them as long as you follow the proper etiquette.
Buenas amigo una pregunta de las tiras blancas que tiene la cuerda que son 7 tú le retiras algunas para poder colocar el reloj dado que ya en varias ocaciones he tratado de colocarlas pero me es imposible y quiero terminarlo gracias amigo
How would I make it into 2 colors? Is it possible or would it just make 2 cords? Can you get Paracord with 2 colors?... I'm very new to all this - but I have to say... I really like to but a watch and make a Paracord bracelet for it.
ficou muito bom, só uma duvida?!?!?! Como eu faço pra troca a bateria caso acabe?!!?!?!?!?! é só remover os pinos??? não vai desfazer o Paracord? Qual a espessura de paracord vc usou??
لا إله إلا أنت خلقتني وأنا أمتك وأنا على عهدك ووعدك ما أستطعت أعوذُ بك من شر ما صنعت أبوء لك بنعمتك عليا وأبوء بذنبي فاللهم أغفر لي فإنه لا يغفر الذنوب إلا أنت يارب العالمين حسبي الله ونعم الوكيل اللهُم صلِ وسلم وبارك على سيدنا محمد وعلى آله وصحبه أجمعين وسلم تسليما كثيرا إلى يوم الدين
i've been back & forth to a bunch of other youtubers doing "tutorials" and i LOVE how you don't clutter your videos with talking. thank you for keeping it simple. great post btw!
+KingTesticus ....grande TESLA....
+cristian silva
slt
@@antoineroosevelt1256 wjا
@@@@@
ขอบคุณผู้จัดทำเรียบเรียง คืนอดีตให้มีชีวิตอีกครั้ง ฟังทีไรไพเราะครับ
Great video. When I got done with the watch band I made a bracelet for giggles. I did this for a plastic Casio watch, needed to grind out quite a bit between the lugs using a Dremel and even at that I could only get three strands behind the pins but it doesn't seem like a problem. Excellent instruction and very good music which made the inevitable rewatchings no problemo. Liked and subbed.
Thanks!! Just finished making my first one using some smaller 330 paracord. Simple and not terribly long to do. Thanks again!
¡Listo!
Lo acabo de terminar hace minutos y quedó excelente. Muchas gracias
Paracord 101
por este tutorial. ÉXITO.
Saludos desde Caracas, Venezuela 27/05/2019 :)
Watched the video couple times and made it.... Casio Gshock Rangeman Easy to follow and looked great !!! Thanks for the detail PC101.
Its hard to tell in the beggining if this is all one continuous strand or 2 seperate ones. It would be nice if the whole jig was in the frame
I like the looks of this band, but have to gut the cord on most digital watches. Very happy with this one, It's a keeper.
Por l
Awesome, I’ve been trying to think of a way to craft a bracelet for a sport watch with a broken rubber/plastic/crappy band. Thanks for sharing your technique.
If you started at the watch and tied toward both buckles you could change the battery more easily. Nice work, a good choice as that knot is soft and flexible.
Greg Stewart To change the battery all he has to do is remove one of the pins. The strap will keep its shape after it's worn for a few days. The idea here is to have one continuous length of paracord if needed. Another benefit of doing it this way is if one of the pins breaks while it's being worn, the watch and strap will stay attached to your wrist. If it's 2 separate bands and a pin breaks the watch falls to the ground, possibly cracking the crystal or damaging the case. It's being done like this intentionally. True your way is easier to change the battery, but it's only about 20-30 seconds faster.
Music: "Ancor" by Josh Woodward
www.joshwoodward.com/#/
Watched the video couple times and made it...cut a lot out of the Casio like mentioned previously. Easy to follow and looked great. Thanks for the detail PC101.
Todd - Of mention in description, Stormdrane is David Hopper, not Dennis.
+sgtshedd Thanks. I will make the change.
You can change the battery! Simply remove the pins and the strap will keep its shape.
Paracord 101 т
Paracord 101 good
Paracord amaze
Paracord 101 isekepraais
Paracord 101 ..
😎going to grab your books 🤩🤗
Just rescued an old watch I loved with this thanks!!
Where did you get those scissors, and do you have any videos about helpful tools for paracord projects?
Really nice video, but you could show how make it without your holder. I made this splice with few problems because of lack of tips. I had to combined a lot but finally my watch looks great. Thanks
Glad I found your vid your instructions are simple and concise, now i can paracord my watch. Thumbs up and subscribed .
thank you. my first go at this and following your video made a great watch strap.
How far do I separate the 2 buckles while I make it? Like how much space did you put inbetween the 2 buckles?
Hi! I really liked this instructions. Out of curiosity, do you have any instructions on how to make the bracelet you show at the end of the video? the one that is blue and yellow?? Thanks in advance.
Nice job on video. Would you recommend (as some book do) to first wet the paracord and hang to dry to allow for shrinkage before doing this kind of work?
What do think about gutting the section of paracord directly behind the watch? I'm thinking of trying this to reduce the thickness.
Wouldn't that make it weak?
You could make 2 of these but shorter, connecting them to the spring pins rather than the clasp
And if you lose one pin the watch will stay on the band, handy in water so watch doesn't sink to the bottom.
Geoff Moore Also if it's one continuous length and you need 6 feet of paracord you have it. If it's in 2 separate sections all you have is a couple of 4 foot sections. Also the watch could be damaged if one of the pins breaks and the watch takes a 4 ft trip to the pavement.
How many inches did you set the jig for? Telling us you just measured your wrist and go from that is not good enough. It seems to me that the length will also affect how you measure out the starting run of three strands. A LITTLE bit of talk and explanation would be nice.
Very nice. I was planning on buying one of these, but you have shown that I can save the cash and make my own.
Hi, is it possible to put survival gear in this band? And possibly weave in a compass and thermometer designed to slide on regular watchbands? Great project, thanks for sharing.
Coole Idee. Nur wie wechselt man die Batterie?
How did you make that adjustable base? Been trying to see how I make one for the bracelets that don't use clips so that I can have the ends held tight but at a closer distance
The instructions I had told me to thread the cord under the pins of the watch...... next time I will use your trick and remove the pins first, haha. Thankfully everything worked just fine, but your way looks a lot simpler to accomplish:-).
Very well done. The music is excellent also.
Great video, having said that, the wound up and twisted paracord at the beginning of the threading gives me the creeps..., sorry!
:-(
Do you have the dimensions for the jig you are using? Or, possibly have the instructions for making one?
You must have practiced a lot because I just did this for my first time and it came out sloppy. Your icon picture in the beginning looks amazing! I'll just have to do it all again. Then again. Then maybe one more time. I did notice that this cord has directions on it. Like as you wrap one string around another, you can tell it wants to tangle sometimes or it wants to go in that direction. I think with a little more string taught it could look nicer.
Yes , I do practice and I have made thousands of paracord bracelets. So, I hope I know what I am doing. Thanks for watching! The longer the cord is, the more likely it will tangle. It is a part of paracording.
carlos Deza Quinomues
Looks simple enough. How would 325 paracord work for this? Too thin?
What size of wood. Congratulations on the very good video.
loving the watch, going to give it a go.
Nice, I love the look of this weave. I'm making a belt (I think the weave I've been using is called the slatts weave), but I hate that it's asymmetrical. Is there a way to make this wider for a belt?
I just bought a paracord watch and it's little big for me trying to figure out how to make it smaller any ideas
I do love the way you doing it.
Добрый день. Где можно посмотреть плетение браслета , который в данный момент на руке?
Qué cantidad de cuerda has utilizado?gracias
Lo hice y resultó fabuloso,gracias por compartir.
How do you size the watch. says 10 feet plus 2 inches for comfort but how to i size that to my wrist?
Show, muito bem trabalhada, muito bem explicado em todos os detalhes, muito bom, ótimo. 👍👍👍👋👋👋
Is there any place to buy the jig you used to hold everything or is that going to be a DIY thing ? If so is there a place to get plans for it ?
i am making this for my "out door" watch.
I like how u did this but i wanted to do this with my ka-bar knife sheath so that i can wrap it around my leg and it doesnt have pins that i can take off to attach the strap to ,and is there any other way i could do it?
I like the music. Good looking watch band too.
muito bom amigo gostei muito do seu vídeo agora posso arrumar a pulseira do meu relógio, quando eu fizer mando pra você uma foto, já estou inscrito no seu canal.
Abraços
Excellent job. how do you know where to stop and place the watch? will definitely try to do one!!!
+Moritz Insupp Since wrist sizes vary and so do watches... you will need to estimate... and possibly redo if needed.
This is a good idea and works great. Thanks for the Video !!!
Does anybody know were there is a drawing or instructions for the 2x4 jig used in the video?
Paracord estan Geniales tus tejidos; muy pulcros y elegantes!! 👏👏👏 me suscribí gracias por compartir tu arte; realmente bellísimo 😉
Estan bacanos saludos desde Bogota Colombia parceros de paracord
I love this one! I am going to try.
Thank you so much ,this time my watch it's so cool! 👍👍
I would like one but not to make it, how much would you charge for one (exactly like this one)
Cool paracord bracelet
Hi, i am from south america, it has been impossible to get these implements, even on internet, you know what i mean, onlne store. Could you help me please.
I have a question: if I wanted to sell paracord bracelets of different designs in a craft store or at a public event, are there legal limitations I'd have to follow for that?
+Mugly Mae The proper etiquette is to site the designer by first, last name and where the design can be located. Feel free to use my designs if you choose to make and sell them as long as you follow the proper etiquette.
So, for example, a tag attached to each bracelet should read Original Design created by: This Person's Name
As Shown on This Site located on UA-cam?
very nice work
Buenas amigo una pregunta de las tiras blancas que tiene la cuerda que son 7 tú le retiras algunas para poder colocar el reloj dado que ya en varias ocaciones he tratado de colocarlas pero me es imposible y quiero terminarlo gracias amigo
You may need to remove several core strands in the core. Some watches are too small for this design.
Uau! Muito Bom! obrigada por Compartilha!
Thank you, from Brasil!
Like that pattern!
How would I make it into 2 colors? Is it possible or would it just make 2 cords? Can you get Paracord with 2 colors?... I'm very new to all this - but I have to say... I really like to but a watch and make a Paracord bracelet for it.
You would not be able to make this with two colors with this method.
maybe you could melt 2 ends of the desired colors together, and make that the middle. or try to hide it somehow.
ok
ficou muito bom, só uma duvida?!?!?!
Como eu faço pra troca a bateria caso acabe?!!?!?!?!?! é só remover os pinos??? não vai desfazer o Paracord? Qual a espessura de paracord vc usou??
To change the battery, just remove the pins. The strap will keep its shape.
Thank you.
i love bracelets,how can i get materials for making right bracelets
Hi, how do I have the measurement between the connectors... excellent work
Do you sell the watchband making wooden contraption on your website?
That is awesome where did you get your bracelet holder this is going to be my first time doing paracord very interesting
I purchased the paracord jig online.
Thank You
etsy sells them
Instructive video ! Thank you ! )
What happend to the string that you clipped on the right side the short side in the beginning of the video?
does the paracord strain the spring bars??
I do not have a jig and for some reason am having a very difficult time getting the first couple of connections started correctly... uuggg
Helped alot! Thankyou
ficou muito legal!!!
parabéns..
Show parabéns, já estou fazendo tbm!!!
is it possible to make this with two colours or will only one colour be shown regardless
Nnika Corbin splice the cord for two colors
Muito obrigado pela dica. Vou fazer um destes.
Very good job
Greetings!, could you tell me what kind of scissors used or as they are called?????
duckbill scissors
+Paracord 101 thanks!!!!!
You're so good. Where I can buy these cords?
Gran trabajo 👍👍👍👍👍
Where do you get watch face from
the measurements for which wrist it is
I have a pocket watch, would this work in it?
How many feet of paracord do u need to make it
cool vid but what if you have a bigger wrist than that or smaller
then use more paracord for a larger wrist and less paracord for a smaller one.
muy buen trabajo excelente voy hacer uno igual saludos
لا إله إلا أنت خلقتني وأنا أمتك وأنا على عهدك ووعدك ما أستطعت أعوذُ بك من شر ما صنعت أبوء لك بنعمتك عليا وأبوء بذنبي فاللهم أغفر لي فإنه لا يغفر الذنوب إلا أنت يارب العالمين
حسبي الله ونعم الوكيل
اللهُم صلِ وسلم وبارك على سيدنا محمد وعلى آله وصحبه أجمعين وسلم تسليما كثيرا إلى يوم الدين
Where did you get the watch?
how many metters do I need to do one bracelet?
Hey for the string, can you use a shoe lase?
Yes, you can. But it will be more flat. I don't know how many other variables may change too.
Paracord 101 hmmm ok
cool but...what about when you need to change the battery? the strands are in the way!
***** You correct. The cords are in the way. However, it is easy to re-make once you've done it.
***** you can remove the pins without changing the bracelet ;)
This is true... Thanks!
+Paracord 101 tdhdwbwydnstya
wow 😉😉😉😉😉😉😉😉😉
good job & nice demo, thanks
Bung Intel
How do you change the battery?
Unfortunately this method won't work with smart watches having pulse and other sensors on the back of the watch
Right, it is for a traditional watch...
how much does it coast total to make this?
muy bueno el trabajo me encanto
Wait how did you attach the pins? Manually or did you use a tool?
napa modesto Manually...
+Paracord 101 do you have any for sale