The only thing that stumped C&C - Snowmobile. Kevin is the man. He paints, mechanics and now a machinist. I can see a BIG Christmas bonus coming his way.
Sorry I couldn’t watch the live stream, but I’m really enjoying watching it on ‘catchup’. I will watch anything you guys put up, the dynamic in your shop is great, you all work well together and seem to have fun too, you can’t beat a happy work environment. Screw the haters, there’s plenty of alternative content out there for everyone who is not interested in what you’re doing!
Hey Clinton, Sorry I missed the live stream! Looking forward to the video showing this part going back on the dozer! Tell Kevin he looked good with the pumpkin eye patch. Christmas is coming - numerous boxes coming your way! Stay safe! Thumbs up! Jim
Sorry I couldn't see it live due to the time difference in Europe. Nice video as always. But then again if I have a question concerning your other videos about the way you handle stuff in the comments, you always replied and gave me a short explanation, so Mega big thumbs up for that.
Sorry I missed your live feed, I was working like you guys. I like the way you are truing up the part. The loggers never sease to amaze me on how bad they can destroy a piece of equipment. At least they keep you in business 😂😂. Have a great rest of your week.
I will not listen to those guys that don't like things scroll.Keep doing what you're doing.You're doing damn hell of a job and I'll Keep watching thanks guys
Great live streaming Clint it was very different video you and Kevin should do some more like that. Can i ask why the pit is open or not got a guardrail round it , the company I work for had a pit but it was covered up unless we are going to use it or we are the guard around it so no one could fall in it . Ralph in the UK.
Hey Clinton, please get one of those galvanized cylindrical trash cans with handles to keep near the lathe. That way, Kevin doesn't have to build up a mound of stringy chips on the floor. They're an unnecessary trip & fall hazard.
Wish I had of knew about you before I quit driving truck because I been through Indiana so many times I can't count them I would have liked to stop and say hello Jamie in Alabama
Somebody wanted to know if Kevin was married? Kev you got groupies!! 🤣 I don't know why but I look forward to the last couple of years and this one with Kevin and all of his Christmas decorations, I think I've got a 47 foot tall Santa Claus I need to send, has the blower and everything. 😅😅
Clint I love the videos and have watched as many as I can. But the live, if I want to listen to a half of a cell phone conversation, I can hang with my wife. PLEASE go back to the original format its great.
Clint get ahold of CEE on utube! Cutting Edge Engineering in Australia He is sharp as a tack with and metal machines! A good guy. I bet he could answer any questions to help! Tks
Why is it? Everybody takes a Ford Bill hot rod. They put a Chevy motor in it but yet they want the Ford 9 inch to go into their hot rods. I believe a Ford needs a Ford and a Chevy needs a Chevy and Dodge needs anything you can getbut I love that motor
The only thing that stumped C&C - Snowmobile. Kevin is the man. He paints, mechanics and now a machinist. I can see a BIG Christmas bonus coming his way.
If you find it, I'll split it 50/50 😂 😂-Kevin
Sorry I couldn’t watch the live stream, but I’m really enjoying watching it on ‘catchup’.
I will watch anything you guys put up, the dynamic in your shop is great, you all work well together and seem to have fun too, you can’t beat a happy work environment.
Screw the haters, there’s plenty of alternative content out there for everyone who is not interested in what you’re doing!
Hey Clinton, Sorry I missed the live stream! Looking forward to the video showing this part going back on the dozer! Tell Kevin he looked good with the pumpkin eye patch. Christmas is coming - numerous boxes coming your way! Stay safe! Thumbs up! Jim
Sorry I couldn't see it live due to the time difference in Europe. Nice video as always. But then again if I have a question concerning your other videos about the way you handle stuff in the comments, you always replied and gave me a short explanation, so Mega big thumbs up for that.
A great way to start the day C&C and a cup of coffee. Love you videos of you doing things I cant do anymore. Keep them coming and stay safe.
Love watching from British Columbia. Wouldn't hurt to tuck your shirts in when working on rotating shafts.
Sorry I missed your live feed, I was working like you guys. I like the way you are truing up the part. The loggers never sease to amaze me on how bad they can destroy a piece of equipment. At least they keep you in business 😂😂. Have a great rest of your week.
I will not listen to those guys that don't like things scroll.Keep doing what you're doing.You're doing damn hell of a job and I'll
Keep watching thanks guys
Hi guys I what your doing, I do this stuff most days and I enjoy watching you guys haven the same fun
Hi guys I am in England I love watching you guys
As far as Keven goes, they say that there’s a fine line between brilliance and insanity and I think he crosses the line constantly every day🙂😎🤣
😂
Watching Kevin operate that lathe while you livestream made me wear my hardhat while watching.
Love your stuff guys paul in England, I absolutely love watching your stuff
Your vids are beaut, keep em coming. From Geelong Down under.
I wish you would explain more what you are doing and how, get technical - I really appreciate you sharing your knowledge
i like this format too, don't change a think.haters can leave any time they want.
Great video guys...Hope that sorts the axle problem out....stay safe and see you soon
screw the haters keep doing the sunday shows!!!
Excellent from Margate East Kent UK
Enjoyed both these live feeds bro. Safe travels. Ken.
I really enjoyed watching these live unedited streams.
Probably not the best weight loss program, but I almost choked on lunch when he said that. Hilarious. Thanx Kevin
😂
Sausage fingers and T Rex arms not withstanding ……………….Kevin is the BEST!
For a two part live I enjoyed watching with all the bloopers you could do a re run 👍👋🇨🇦
Great to see you live getting ready to fly back to uk after spending two months in Indianapolis with family
keep doing what you do guys 👋
Good job guys love watching your videos keep em coming
Great live streaming Clint it was very different video you and Kevin should do some more like that. Can i ask why the pit is open or not got a guardrail round it , the company I work for had a pit but it was covered up unless we are going to use it or we are the guard around it so no one could fall in it .
Ralph in the UK.
We are hoping to catch guests by surprise. It puts the lotion on its skin!!!😂-Kevin
Great live video thanks Clint and Kevin and and Scott
I would like to see more on the six wheel excavator.
I found you again! Hello from Nanaimo BC. Randy must have the day off.
Hey Clinton, please get one of those galvanized cylindrical trash cans with handles to keep near the lathe. That way, Kevin doesn't have to build up a mound of stringy chips on the floor. They're an unnecessary trip & fall hazard.
😂
Hi I love your videos I used a lathe at college
I come on here to watch C&C videos.
👀🇦🇺 Thanks, guys.
Wish I had of knew about you before I quit driving truck because I been through Indiana so many times I can't count them I would have liked to stop and say hello Jamie in Alabama
You are absolutely welcomed
Kevin I see you learned from the master good job Bub ❤
Watching from Adelaide Australia
Hi all the way from the other side of the pond. You are going to have to get the hang of this live streaming.
I watch Cutting Edge Engineering every week for several years, yeah Curt is pretty good.
You and Kevin are a hoot.
We watching in australia down under.
Enjoy watching great job.
Somebody wanted to know if Kevin was married? Kev you got groupies!! 🤣
I don't know why but I look forward to the last couple of years and this one with Kevin and all of his Christmas decorations, I think I've got a 47 foot tall Santa Claus I need to send, has the blower and everything. 😅😅
I love all your videos Sundays to
Great show
Kevin is funny as he'll love Kevin!!!😊
I have got to put seals in my track Ho traction motor. Can y’all do one so I can do mine??🚜🚜
Clint I would love to help you fix up your wireless for the shop and the yard. IT Pro here
Rather watch your channel than better content and a learning experience
Thanks for sharing!😊
I felt welcomed to the neighborhood Kevin.
😂
Im here, keep up the good work.
Clint I love the videos and have watched as many as I can. But the live, if I want to listen to a half of a cell phone conversation, I can hang with my wife. PLEASE go back to the original format its great.
Something different for others
You don’t have to watch them all
Kevin's fingers are precision calibrated, hydraulically assisted multi purpose tools , his hands are dangerous weapons lol. DDDDDOUG.
And the happiest continues!!💪🤗🇺🇸
From Calexico California HI!!!
So how do you fix a bend shaft
How much for the woodmizer
Well I didn't vote for trump, but proud to watch this channel.
Kevin the El Camino is the best. Go Chevy.
Good job there T'Rex 😅
Kevin needs a raise so he can fix his car
"Haters" will be haters, will never be able to escape them
Awesome job guys,
Crack up,
Swan valley machinery is another awesome channel,
Good times roll and happy days.
From the land of kiwis 😂😂
Hey from Canada
Let me know when Kevin's santa is to be shown please?
Where do you put your scrap when the floor is full 😂
Eagles like cats. They cleaned them here... Hoot owls like kittens
Hi from SW of England
Kevin just ain't right 😅..... In a good way Kevin in a good way .
For only two people working in the shop I wonder how many times a day you say Kevin
Clint ,is that curly howard jr in the live video ?🤔boston wise guy 🇱🇷🇮🇪🦉
Who started c& c equipment
Clinton
are you gonna transport projects between shops with drones?
Nice Vid / Live Feed !
When will you do another live stream
Just turn the axles 180 degrees and leave the rest to your Loggers!
Trust us we would but the holes won’t line up
Are you going to work on the old dresser
Live Feed was great...
I'm watching
Back with you and t'rex 😅
Heh guys make sure you make sure the center is in good shape or it will give you lots of runout on the OD👍
Yep
Question is how do you bend those shafts? Don’t feel bad I don’t watch anyone’s trucking videos
❤❤ Can i get a C&C coffee mug by Christmas ?
Maybe
👍👍👍👍
Clint get ahold of CEE on utube! Cutting Edge Engineering in Australia
He is sharp as a tack with and metal machines! A good guy. I bet he could answer any questions to help! Tks
Agreed 💯
Sir, PLEASE keep the closed caption going. Us deaf guys can’t follow along otherwise.
Closed caption is done by UA-cam and it takes them a little time to add it after the video is posted especially on live stream
I was wondering how much you're asking for the sawmill if you're going to sell it
When are you going to fix the D7
Not seen Mason around in quite a while now
❤❤ Mason is not with C&C anymore, he now works nearby.
Is this shaft indexed? Could it be rotated 180 degrees to achieve the new downward angle??
Unfortunately no
@C_CEQUIPMENT Of course! Thanks for the reply!
More please.
is the pond at you dad house full
What is the name of you guys favorite restaurant where you live?
Mis dos abuelos
Thought you would be celabrating
I Am !! 👍 🇺🇸
Guys had go and repair my chair came runing back in hearing bells only to see kevin with a no 1 iron on hand
Saw is the movie you are thinking of..with the spiral
Just sent you a link for one.
Why is it? Everybody takes a Ford Bill hot rod. They put a Chevy motor in it but yet they want the Ford 9 inch to go into their hot rods. I believe a Ford needs a Ford and a Chevy needs a Chevy and Dodge needs anything you can getbut I love that motor