Mike. I kid you not, I must have watched over a thousand videos on how to make concrete countertops! Yours are hands down the absolute best! Very informative, straight forward, and to the point. Also, this is the first time I have EVER felt the need to leave a comment on ANY video. Keep up the great work!
I don't think I've ever watched one video and liked, commented and subscribed instantly. Watched the how to make a concrete counter top and did just that. Oh, and shared it as well. And my buddies shared it. Keep up the great work!!!
Mike, I watched your "1-Hour Countertop" video, a couple times, followed all your instructions, and poured my first ever concrete countertop today. It was a great reward to see it release from the mold nearly without a flaw. (Hence me needing to watch the concrete sealer video.) I appreciate your precision with measuring the water/mortar mix, and how well you demonstrate all required techniques of each step. Other videos I have seen are needlessly complicated, especially for a small countertop project, but your video makes the process so approachable. I had a sneaking suspicion it would not actually be as hard as some of these videos make it seem to fab my own countertops, but your video was the catalyst in motivating me to attempt this. I credit you for my success with this, and also wanted to say thanks for a lot of things. Your sense of humor belies the amount of information and expertise needed to be doing what you are doing, and your humility and sincerity are most admirable. Thank you for your generosity in sharing all of that with all of us.
SUGGESTION: How about a video showing how to stain the concrete or mixing a color in with the concrete mixture. Keep up the great work, love the videos!
I agree! I’ve been wanting to do concrete countertops but have been intimidated by it, but you’re convincing me I can do it! Add some color! I need more!
This is golden. I've been looking to diy countertops and no one talked about great sealers. I've been researching diy concrete tops for a week now and I just found you. Thank goodness
Finally! Someone who gets to the point, doesn't cram products or self services down your throat. I must say, I have watched SEVERAL counter top vids and these are hands down the best on you tube. You sir, are an awesome dude! Video is edited very, very well. Humor is actually funny. -FIRE!- Didn't take 45 minutes to explain a 13 minute process. I can't wait to put together my outdoor kitchen based on these videos! A freakin' +
I have a tip for a glaze coat or any two-part mix. Just Mark your mixing stick with 2 even measurements and poor one bottle to the first line and the second bottle to the second line you save 2 mixing cups by doing it this way.
I have another idea. Assuming the two parts have about the same specific gravity (it’ll probably be close enough), use an inexpensive electronic kitchen gram scale. Tare. Pour the first one. Tare. Pour the second one to the same mass.
Never did concrete counters befor, watched you video went out and did 15 plus feet with separate back splash and a blank for a double stainless sink and NAILED it. Well the sink section did break during transfer of the form (an engineering on my part), but all and all pretty cool. Came back searching for sealer ideas and BANG! There you are again! Love your work man, keep it up. Cheers form Mid Coast Maine.
I wish you would have sprayed water on all the different sealed parts so we could see how it beaded or behaved. I also wished you would have done a slower overhead shot of all the sealers for comparison. Great video though.
Dude. i have watched so many concrete countertop videos since i first saw your first one.. and you blow away them all!. all i wanted to know was how to do these basics. and you just tell it how it is. without skipping steps. i love it!! Thanks!!!
Solid video! I was curious to know more about what each product feels like afterwards. Also, I wanted to know what each if these sealers would be best used for
Calling it right now, this dude is going to have a cable show within 5 years. You're so fun to watch and give such practical tips. Please never change this channel its so perfect. Subbed!
I agree this guy rocks, and maybe he will get a cable show. But some people would be happier staying with UA-cam and maybe Patreon. At least people who may not want some of the drawbacks that a more "showbiz" life would bring. I'm NOTknocking anyone that does go the cable show route, just pointing out that he may be a 100% success even without a cable show.
What's next, hurry... I am hooked. Shouting out others work and techniques... WELL DONE!! Just a tip, using a heat gun can also assist in removing bubbles from epoxy. Lovin this Channel. Thank you for sharing your talents and your Charisma.
i was stunned by you jumping up onto the counter you had just made a few hours ago and i am loving these no bullshit videos. All of these different sealing products look great choosing the right one for the right job is everything. Thanks for the creative spark and thoughtful knowledge.
congrats on rising so quickly man, when i watched your first video i thought you had been making videos for years, ive NEVER seen such quality on a first vid, your content is amusing, detailed and easy to comprehend, your definitely doing it right. youve inspired me to start a pour, ive been needing a good desk for a LONG time, ill be sure to send pictures when i get the design worked out(im a graphic designer and a blacksmith, im nitpicky what can i say)
Michael why can’t all of the diy folks make it as easy and informative as you do. I’m have a great sycamore tree that some incredible pieces of bark and I am trying to make epoxy tiles with them for my dining room floor. You can’t imagine all the info I’ve had to read to be able to make this happen! They need take lessons from you about how to make diy videos!!!
Thanks for showing the different sealing options. I also really liked that you showed what others have done with your technique. Please keep doing this.
Using your technique, I am about to pour my first kitchen counter tops for either side of our kitchen range. I was waiting for you to show ways to seal the surface. Thanks!
Loving the glass look on the epoxy. You can add acrylic paints to the epoxy for a tint, you can add dye to the concrete for a tint...there are so many options. Awesome job Michael. Keep the videos coming! More vids = more subs and views...which equals sponsors!!!
Love your videos! Not too long, but they get to the point! Who has time to watch hour long videos, only to find out you still don't feel confident to start the project!? Nice job!
Which sealer is best? Really good question. The biggest impact was definitely the 2 part stuff. Thanks for sharing all those amazing Viewers' projects. I am really impressed with how they each took the basics and added a new flair. I especially LOVED that shower project - great job! As always, I can't wait for your next video.
Omg. I for real love you! I am totally going to do this for a kitchen island for my son's first house! He's 20 and buying a home! Love love love your vids. They are actually enjoyable to watch!
I love the look of epoxy as a finisher on just about anything. I've done a few counter tops this way and made a 60's worn out counter look like shiny new granite. Another great video - keep them coming! In one of your upcoming videos it would be great to hear how you acquired your skills.
I haven't tried the Cheng sealer yet. I think I'll pick it up and give it a spin. As of right now, there is one sealer that I use worry free; Omega. Staining is concrete's biggest enemy, unless you want staining. Acid stains and curry stains can transfer through some of these sealers over time as moisture activates the sealer. Very important to choose a sealer that will not activate when wet, and will resist string acid stains. Also, consider a sealer that has very nice heat resistance and scratch resistance. A scratch in the seal can let in the bad stains.
Another AWESOME video sir! I Probably should go get some sealer now... You keep making me put in work man.. please don't start doing video about mowing lawns or raking leaves you could probably make that look cool and fun... I'd never get any rest lol. Thanks for making these videos brother and thanks for making them so well...
Make this is my favorite DIY channel! And thank you for sharing project pictures from you receive from your other digital media channels. Not all of us have time or want to be on other types of media. Congrats to all those who shared their projects/work with you. Ron
Dude, your skill set Rocks. I plan on sharing these videos with my wife so that we can come up with a nice table top for our paver patio. Thank You for sharing!
@@MichaelBuilds So like some others have mentioned, can this be dyed? Our paver patio has a black border and I would like to carry that over into the counter top.
WOW, on this video and I absolutely love your surprise at the end. Thank you Michael for your great videos. I've gotten to where I'm watching them even if I'm not doing that project yet; BUT I've been talking about them. Yes, telling other people about the great projects you've done. Your bird baths, fire pit, bench w/the river running through it and it looking like real water over the rocks. I can't choose my favorite. I love the counter tops. At first I was like, I don't want a concrete counter top but after seeing what you can do with them, I so want mine to look like that. Thanks again. We love you too. I love what you did there. Hugs
Just found your videos, and I can't wait to implement your techniques. Truly changes perspective on the ease of starting to work with concrete. Keep up the great work, you'll be at 100k soon!
100K BABY!!!! I haven’t been able to stop looking at my UA-cam app to see where my sub count is at lol 😂 thank you so much for the kind words Bart and welcome to the channel!!! 😉👍🏻
Sticking to your channel! I'm planning on demolishing our kitchen countertop and will see... i will send updates. I can't stop smiling watching your videos....
I'm SO glad I found your channel!! Thank you for sharing great content! I loved how you shared other people's project inspired by your video at the end, very cool! Humans are awesome. Keep posting bro♡
I am very picky as a fellow builder myself. Most of these videos people make drive me crazy. Yours however are very enjoyable and bro ....you're straight up a nice dude. Keep it up.
Back splash: 1. Simply make a 4" tall piece, 3/4"-1" thick, same way as countertops. 2. Bead of Onyx collection clear silicone 1/4" from back wall on entire length of counter top, stop 1/2" from each end of countertop. 3. Place backsplash flat, upside down, apply same silicone beads in @ 3-1/2" circles, staying 1/4" minimum from all edges, across back of entire back splash. The circles of silicone will form a suction as you install the backsplash. 4. Line up backsplash with ends, set on top 1/8" from back wall and push backsplash into place evenly. Warning: If you get silicone too close to edges of backslash it will push out onto the wall during installation and you will NEVER be able to caulk or paint wall where wall and backsplash meet.
Pouring my kitchen today. Everything done, just the poor left. I have been struggling to find info on sealants for it. I'm in Australia but this helped a lot thank you.
I'm getting ready to use the glaze coat on an indoor concrete slab. This video killed it on what different brands there are, how to use them, and the results. Best sealing video out there!👍 You now have a new subscriber.
I can't say enough about how wonderful your content is. I am dying to make my first project, a table for the cottage deck. If it turns out 1/4 as good as the stuff you have shown, I will try to get you a picture
Hey Mike. Just love your vids! I really appreciate how you cut to the chase and show us the stuff we need to know. So many other videos are people who surely love to hear themselves talk. Thank you for teaching me new skills and keeping in real!!
Thank you for making these videos. We are using all of your instructions to improve our outdoor kitchen with concrete countertops... A much needed improvement that we have been afraid to tackle as others made it look so difficult. Your instructions convinced us we CAN do this.
Really like your videos . The epoxy coat was what I was looking for . I'm going to do a kitchen counter top , but I want it to have a marble look and be food grade . Can't wait to try it .
M D I'm looking to do a kitchen countertop as well, and based on this video I think the epoxy is what I want. I'm half way done installing the cabinets, won't get to the countertop for a few weeks, could you reply here after you finish yours and let us know how you like the epoxy?
John Early , I'm not sure when I'll be getting to it . Its on the to do list but there are quite a few things ahead of it . You'll probably get to yours before I get to mine .
This video was a great continuation of the other videos. And all of you, submitters too, are very talented. Thank you for sharing. Keep up the good work.
awesome video! perfect timing - getting ready to seal my first ever GFRC tabletop. going with option 1, Cheng! Already ordered it off of amazon. Thanks a million, love you style and approach to the videos. Your concrete countertop video was an awesome alternative to gfrc, as it is quite expensive. The best part about building and making is there's never just one way to approach it. Thanks again!!
That is so true! I can’t tell you how impressed I am that you tackled GFRC!!! You are a total rock star ⭐️ I would love to see pics! Instagram @michaelbuilds313 😉👍🏻
This is exactly the video I’ve been looking for, before I strip & refinish our charcoal gray concrete kitchen counter- cannot thank you enough! I’ll try & send before & after pics.
By far the easiest, quickest and best option for concrete countertops!! I couldn't be happier! well done on the video besides the Detroit Tigers bucket go tribe!
We bought a house with pretty beat up concrete counter tops. Don’t think they ever sealed them. There are rough edges, chunks missing on edges(especially around the sink), and they cut right on them so there are scratches and cut lines. QUESTION is, do I or should I sand or do anything else before sealing them? Also, thank you so much for this easy to follow and informative video!!
I was hoping you would make this video. It is perfect timing. I am planning on making kitchen countertops and a breakfast bar but will need to do them in sections to make installation more manageable. Would you recommend sealing before installation or after? I'm mostly concerned if the joint seals will be affected one way or another. And I second the request for a vid regarding stains and such
No no no, THANK YOU! I was so happy to see you message pop up because you were the last fella I needed permission from and I was so scared that I was going to have to take you out of the vid lol ! I’m just sad that I didn’t have time to add your latest pictures into the video😢 The new pics you sent me were beyond awesome! Thank you so much for being apart of this whole thing man! 😉👍🏻👊🏻
@@bonahisme Awesome job, Jonah. I've been trying to figure out how to dye the Rapid Set like you did and thought I'd ask how you achieved it? I was thinking something like Cheng Concreter Countertop Pro-Formula Mix might work as an additive, but I'm also hesitant to mix products from different manufacturers as they might not play nice in the long run. Would appreciate the tip! Cheers
tastybarrels9 no problem 👍🏻 Cheng pro formula is a stand alone product line. Super good, but very high-end. This is a much more affordable alternative. As far as the dyes or coloring goes, I used concrete dry pigment. Very cheap for a small one pound bag. I went to my local concrete company and bought it from them. They had a book with many colors to choose from. I tried to get it at Home Depot, but they don’t carry any dyes. I hope this is helpful. If you have anymore questions feel free to ask.
I think I like the first sealer the best overall, especially if I was making a table top or outdoor bar like in your other videos. If I was making like actual countertops for my kitchen or bathroom I think I would go with the epoxy though. Another spectacular video btw, you really need to quit your day job and move where the weather is nice year around so we can get a couple videos a week lol.
Great videos bud! I've been wanting to do some concrete molds and your videos are giving me motivation and courage to go for it, gonna incorporate them into a BBQ grilling area! New Subscriber here!
Thanks for the awesome informative video! I'm definitely going to try this in the kitchen remodel I'm working on. I love how positive you are, such warmth and kindness. Keep up the good work Mike!
Awesome video! I've watched it like 5 times and really like the way you show how these sealers look side by side. As someone famous probably said - don't put in all that work to create a cool counter top only to screw it up by using the wrong sealer or one that you don't like the look of (or that's not food safe). Keep it up.
Love all your videos! I can't wait to get started on making a counter top! And, I know this is weird but I'm going to try and use this method on making head stones for family members. 😀 so thanks and your right, I don't need to watch any other videos.
Thank so much John! Believe it or not You’re actually not the first one to tell me that your making a head stone haha. Thank so much for being a subscriber!
You're a cool dude...super positive and fun to watch. Now that the weathers nice here in Oregon, I'll be doing my first concrete projects using your vids. Thanks for your hard work, i can tell you put alot of effort and care into this.
The glaze is my favorite!!! I noticed it darkened the stone, and I’m wanting to color the mix when I make my topper. Should I go with a lighter color for the stain if I go with glaze?
I don't subscribe to many channels but I like your style. Info is great and to the point. You earned it. Just bought a house, want to pour a coffee table. Will do a few practice ones with diff. sealers to see what I want.
Clay, I CAN NOT begin to tell you how much I love comments like this! It’s already super cool to get people to subscribe to my channel to begin with... but when someone tells me that they don’t usually subscribe to channels in general and they decided to become one of MY subscribers... that feels so good on my heart man! Thank you so much and welcome to the channel! 👍🏻😊
Took 2 days to get to watch your newest work of art but so glad I did. Another out of the park success mate, as demonstrated by works inspired your tutorials and the continued exponential growth of the channel. Ps old man sounds are natural, other old sounds..... well Mama didn’t raise no fool 😉 good job dude
Mike. I kid you not, I must have watched over a thousand videos on how to make concrete countertops! Yours are hands down the absolute best! Very informative, straight forward, and to the point. Also, this is the first time I have EVER felt the need to leave a comment on ANY video. Keep up the great work!
James.... THANK YOU SO MUCH! I can’t tell you how much that means to me!
Nailed it!
I don't think I've ever watched one video and liked, commented and subscribed instantly. Watched the how to make a concrete counter top and did just that. Oh, and shared it as well. And my buddies shared it.
Keep up the great work!!!
James Catelotti i totally agree!!!
I completely agree. I have watched tons and fail pretty miserably on doing my own countertop. Now I feel encouraged to try again.
Mike, I watched your "1-Hour Countertop" video, a couple times, followed all your instructions, and poured my first ever concrete countertop today. It was a great reward to see it release from the mold nearly without a flaw. (Hence me needing to watch the concrete sealer video.) I appreciate your precision with measuring the water/mortar mix, and how well you demonstrate all required techniques of each step. Other videos I have seen are needlessly complicated, especially for a small countertop project, but your video makes the process so approachable. I had a sneaking suspicion it would not actually be as hard as some of these videos make it seem to fab my own countertops, but your video was the catalyst in motivating me to attempt this. I credit you for my success with this, and also wanted to say thanks for a lot of things. Your sense of humor belies the amount of information and expertise needed to be doing what you are doing, and your humility and sincerity are most admirable. Thank you for your generosity in sharing all of that with all of us.
SUGGESTION: How about a video showing how to stain the concrete or mixing a color in with the concrete mixture. Keep up the great work, love the videos!
Thank you Chris
I agree. Those wood look concrete tops were amazing.
I second this. Please and THANK YOU.
I agree! I’ve been wanting to do concrete countertops but have been intimidated by it, but you’re convincing me I can do it! Add some color! I need more!
YES..i vote for this too! ;-)
This is golden. I've been looking to diy countertops and no one talked about great sealers. I've been researching diy concrete tops for a week now and I just found you. Thank goodness
Dude... UA-cam has been around for years. Where the heck have you been? Refreshing. Good job!
was saying the same thing
Finally! Someone who gets to the point, doesn't cram products or self services down your throat. I must say, I have watched SEVERAL counter top vids and these are hands down the best on you tube. You sir, are an awesome dude! Video is edited very, very well. Humor is actually funny. -FIRE!- Didn't take 45 minutes to explain a 13 minute process. I can't wait to put together my outdoor kitchen based on these videos! A freakin' +
I have a tip for a glaze coat or any two-part mix. Just Mark your mixing stick with 2 even measurements and poor one bottle to the first line and the second bottle to the second line you save 2 mixing cups by doing it this way.
That’s a great tip!!!
I have another idea. Assuming the two parts have about the same specific gravity (it’ll probably be close enough), use an inexpensive electronic kitchen gram scale. Tare. Pour the first one. Tare. Pour the second one to the same mass.
@@texstan100 that's a good idea too, I myself would end up waisting time looking all over for my scale when a mixing stick will do the trick.
@@texstan100 exactly what i was thinking too...
@Jennifer Ng oooh there are some very accurate food scales out there! ;-)
Never did concrete counters befor, watched you video went out and did 15 plus feet with separate back splash and a blank for a double stainless sink and NAILED it.
Well the sink section did break during transfer of the form (an engineering on my part), but all and all pretty cool.
Came back searching for sealer ideas and BANG! There you are again!
Love your work man, keep it up.
Cheers form Mid Coast Maine.
That’s what I’m talkin about!!! Thank you so much Jon!
I wish you would have sprayed water on all the different sealed parts so we could see how it beaded or behaved. I also wished you would have done a slower overhead shot of all the sealers for comparison. Great video though.
Oh my god that’s a great idea! And what really sucks about that is it would have only taken me a few seconds to get that shot too! Grrrrr! Lol
Dude. i have watched so many concrete countertop videos since i first saw your first one.. and you blow away them all!. all i wanted to know was how to do these basics. and you just tell it how it is. without skipping steps. i love it!! Thanks!!!
Thank you so much!!!!
Solid video! I was curious to know more about what each product feels like afterwards. Also, I wanted to know what each if these sealers would be best used for
Michael, you are the best no nonsense get straight to the point video presenter. Top job mate 😀. Cheers from Michael. Australia.
Thank you so much Michael!!! I love hearing from my Australian 🇦🇺 and UK 🇬🇧 viewers! You guys rock!
You know your old when you get a beavis and butthead reference.
Lmao 😂🤣😂🤣 true story! Lol
lol i get a amos and andy reference .. abbott and costello ...pretty soon the smithsonian is going to want me to sign a release for my body lol
Marie Miller lol
Who doesn't go to Vegas to play the sluts
I am cornholio!
Calling it right now, this dude is going to have a cable show within 5 years. You're so fun to watch and give such practical tips. Please never change this channel its so perfect. Subbed!
Oh my god! That you so much for this comment! You seriously rocked my day with that! And welcome to the channel!
I agree this guy rocks, and maybe he will get a cable show. But some people would be happier staying with UA-cam and maybe Patreon. At least people who may not want some of the drawbacks that a more "showbiz" life would bring.
I'm NOTknocking anyone that does go the cable show route, just pointing out that he may be a 100% success even without a cable show.
What's next, hurry... I am hooked. Shouting out others work and techniques... WELL DONE!! Just a tip, using a heat gun can also assist in removing bubbles from epoxy. Lovin this Channel. Thank you for sharing your talents and your Charisma.
i was stunned by you jumping up onto the counter you had just made a few hours ago and i am loving these no bullshit videos. All of these different sealing products look great choosing the right one for the right job is everything. Thanks for the creative spark and thoughtful knowledge.
congrats on rising so quickly man, when i watched your first video i thought you had been making videos for years, ive NEVER seen such quality on a first vid, your content is amusing, detailed and easy to comprehend, your definitely doing it right. youve inspired me to start a pour, ive been needing a good desk for a LONG time, ill be sure to send pictures when i get the design worked out(im a graphic designer and a blacksmith, im nitpicky what can i say)
Thank you so much! I can’t tell you how much that means to me!
Why Tears Of Death...just curious
Michael why can’t all of the diy folks make it as easy and informative as you do. I’m have a great sycamore tree that some incredible pieces of bark and I am trying to make epoxy tiles with them for my dining room floor. You can’t imagine all the info I’ve had to read to be able to make this happen! They need take lessons from you about how to make diy videos!!!
Thanks for showing the different sealing options. I also really liked that you showed what others have done with your technique. Please keep doing this.
Thank you so much for appreciating the video!
This is definitely the most informative sealer video of all time. It really shows the different types off well.
Another great video! Congrats on the 91,000+ subscribers in 4 months! That's gotta be some kind of record. Keep 'em comin'.
Using your technique, I am about to pour my first kitchen counter tops for either side of our kitchen range. I was waiting for you to show ways to seal the surface. Thanks!
I pressed "Like" BEFORE I started watching. I'm expecting another great demo.
Loving the glass look on the epoxy. You can add acrylic paints to the epoxy for a tint, you can add dye to the concrete for a tint...there are so many options. Awesome job Michael. Keep the videos coming! More vids = more subs and views...which equals sponsors!!!
Thank you so much!
I love the way you share what other guys and gals are doing. Keep up the great work
Love your videos! Not too long, but they get to the point!
Who has time to watch hour long videos, only to find out you still don't feel confident to start the project!?
Nice job!
Thank you so much! That means a lot to me!
Which sealer is best? Really good question. The biggest impact was definitely the 2 part stuff.
Thanks for sharing all those amazing Viewers' projects. I am really impressed with how they each took the basics and added a new flair. I especially LOVED that shower project - great job!
As always, I can't wait for your next video.
Thank you so much Eva! That shower fella sent me even more amazing pics yesterday that I wish I could have plugged into the video!
See the trouble you started, inspiring the flippin world. We need more people like you.Flippin hell mate, please keep it up, and THANK YOU.
No no no, THANK YOU! 😉👍🏻
this guy is charming. Damn i wish he tested those sealers in detail. :)
Omg. I for real love you! I am totally going to do this for a kitchen island for my son's first house! He's 20 and buying a home! Love love love your vids. They are actually enjoyable to watch!
Oh my god Summer! Thank you so much! You really brightened my day today with that comment! 👍🏻😉
I love the look of epoxy as a finisher on just about anything. I've done a few counter tops this way and made a 60's worn out counter look like shiny new granite. Another great video - keep them coming! In one of your upcoming videos it would be great to hear how you acquired your skills.
I would love to do that soon! I didn’t think anyone would care this early in the channels age. So thank you so much for suggesting it!
Have you used the epoxy on a fire table top? I'm curious if heat or flames will be a factor?
@@douglassebold213 Hi Doug. No I haven’t tried that
Glad that you mentioned FOOD GRADE sealers. If you are going to be preparing food or eating off the counter top seal it with a FOOD GRADE sealer.
😉👍🏻
Love your clips. I'm super inspired.
And your a cool dude.
Cheers for sharing your skills & love. Your the Bob Ross of building.
From NZ 👍
Thank you so much! I can’t believe I’m getting love from NZ! You All Rock!
I haven't tried the Cheng sealer yet. I think I'll pick it up and give it a spin. As of right now, there is one sealer that I use worry free; Omega. Staining is concrete's biggest enemy, unless you want staining. Acid stains and curry stains can transfer through some of these sealers over time as moisture activates the sealer.
Very important to choose a sealer that will not activate when wet, and will resist string acid stains. Also, consider a sealer that has very nice heat resistance and scratch resistance. A scratch in the seal can let in the bad stains.
Another AWESOME video sir! I Probably should go get some sealer now... You keep making me put in work man.. please don't start doing video about mowing lawns or raking leaves you could probably make that look cool and fun... I'd never get any rest lol. Thanks for making these videos brother and thanks for making them so well...
Lol 😂 thank you so much James!
Make this is my favorite DIY channel! And thank you for sharing project pictures from you receive from your other digital media channels. Not all of us have time or want to be on other types of media. Congrats to all those who shared their projects/work with you.
Ron
Te amamos también
We love you too. Great video I'm a New one from Panamá Central América. Gracias Bro
Dude, your skill set Rocks. I plan on sharing these videos with my wife so that we can come up with a nice table top for our paver patio. Thank You for sharing!
Thank you so much Mike!
@@MichaelBuilds
So like some others have mentioned, can this be dyed? Our paver patio has a black border and I would like to carry that over into the counter top.
Great video! I've been looking for a video like this for awhile now. Keep the videos coming please.
WOW, on this video and I absolutely love your surprise at the end. Thank you Michael for your great videos. I've gotten to where I'm watching them even if I'm not doing that project yet; BUT I've been talking about them. Yes, telling other people about the great projects you've done. Your bird baths, fire pit, bench w/the river running through it and it looking like real water over the rocks. I can't choose my favorite. I love the counter tops. At first I was like, I don't want a concrete counter top but after seeing what you can do with them, I so want mine to look like that. Thanks again. We love you too. I love what you did there. Hugs
Just found your videos, and I can't wait to implement your techniques. Truly changes perspective on the ease of starting to work with concrete. Keep up the great work, you'll be at 100k soon!
100K BABY!!!! I haven’t been able to stop looking at my UA-cam app to see where my sub count is at lol 😂 thank you so much for the kind words Bart and welcome to the channel!!! 😉👍🏻
Sticking to your channel! I'm planning on demolishing our kitchen countertop and will see... i will send updates. I can't stop smiling watching your videos....
I'm SO glad I found your channel!! Thank you for sharing great content! I loved how you shared other people's project inspired by your video at the end, very cool! Humans are awesome. Keep posting bro♡
Thank you so much Lena!!! I make it a channel... you all make it a community 👍🏻😉
I am very picky as a fellow builder myself. Most of these videos people make drive me crazy. Yours however are very enjoyable and bro ....you're straight up a nice dude. Keep it up.
Thank you so very very very much for this comment! You have no idea how much that means to me! Can’t wait to share some big news with you guys!
I really hope you're going to show how to hang a slab for a back splash or shower wall so that it's fixed to the wall.
I was also thinking of shower walls.
How thin can it be for a shower wall standing upright on end? Shower is a mere 32x32.
Back splash:
1. Simply make a 4" tall piece, 3/4"-1" thick, same way as countertops.
2. Bead of Onyx collection clear silicone 1/4" from back wall on entire length of counter top, stop 1/2" from each end of countertop.
3. Place backsplash flat, upside down, apply same silicone beads in @ 3-1/2" circles, staying 1/4" minimum from all edges, across back of entire back splash. The circles of silicone will form a suction as you install the backsplash.
4. Line up backsplash with ends, set on top 1/8" from back wall and push backsplash into place evenly.
Warning: If you get silicone too close to edges of backslash it will push out onto the wall during installation and you will NEVER be able to caulk or paint wall where wall and backsplash meet.
Pouring my kitchen today. Everything done, just the poor left. I have been struggling to find info on sealants for it. I'm in Australia but this helped a lot thank you.
Thank you so much Daniel!
Turned out well, I'm happy with it for a first try. Im going to epoxy coat.
You're such an inspiration. Once again, thanks for the up load. I did wonder about the differences in each coating.
Thank you so much Jewel!
I'm getting ready to use the glaze coat on an indoor concrete slab. This video killed it on what different brands there are, how to use them, and the results. Best sealing video out there!👍 You now have a new subscriber.
I can't say enough about how wonderful your content is. I am dying to make my first project, a table for the cottage deck. If it turns out 1/4 as good as the stuff you have shown, I will try to get you a picture
Oh my gosh thank you so much Glen!
Hey Mike. Just love your vids! I really appreciate how you cut to the chase and show us the stuff we need to know. So many other videos are people who surely love to hear themselves talk. Thank you for teaching me new skills and keeping in real!!
Thank you so much Gary!
Brother Mike😎
You're a top-notch craftsman & instructor📐
Love ur tutorials🔨
Thank you so much Timothy!
Thank you for making these videos. We are using all of your instructions to improve our outdoor kitchen with concrete countertops... A much needed improvement that we have been afraid to tackle as others made it look so difficult. Your instructions convinced us we CAN do this.
Really like your videos . The epoxy coat was what I was looking for . I'm going to do a kitchen counter top , but I want it to have a marble look and be food grade . Can't wait to try it .
M D I'm looking to do a kitchen countertop as well, and based on this video I think the epoxy is what I want. I'm half way done installing the cabinets, won't get to the countertop for a few weeks, could you reply here after you finish yours and let us know how you like the epoxy?
John Early , I'm not sure when I'll be getting to it . Its on the to do list but there are quite a few things ahead of it . You'll probably get to yours before I get to mine .
M D fair enough. I will do my best to remember to come back here and follow up after I finish my countertops. Good luck with your projects!
Dude, you’re a natural at making videos. I hope you’ll be cracking open many more special beers sooner than you think.
Loving your channel so far. Definitely going to be attempting my own build here shortly.
This video was a great continuation of the other videos. And all of you, submitters too, are very talented. Thank you for sharing. Keep up the good work.
Thank you so much JoAnne! 👍🏻😉
You make such great videos! Love watching these!
Thank you so much Rae!!!
Very informative, all details and to the point.
The best part: I ❤️ my subscribers!
I❤️ your videos 😉.
Good luck
AWWWWWWWW! Thank you so much Jeny!
I loved the work viewers submitted at the end....could you please do a whole video on submissions??
Brother you are the master jedi of the concrete counters keep it real
awesome video! perfect timing - getting ready to seal my first ever GFRC tabletop. going with option 1, Cheng! Already ordered it off of amazon. Thanks a million, love you style and approach to the videos. Your concrete countertop video was an awesome alternative to gfrc, as it is quite expensive. The best part about building and making is there's never just one way to approach it. Thanks again!!
That is so true! I can’t tell you how impressed I am that you tackled GFRC!!! You are a total rock star ⭐️ I would love to see pics! Instagram @michaelbuilds313 😉👍🏻
Your videos have saved my first-time home buyer renovating experience lol!
AWESOME VIDEO KEEP IT UP! Always excited to see your video notifications show up!
Thank you so much! You have no idea how much that means to me!
SNAG ALIEN: Me too... ;)
You’re my favorite Laurie P!!! 🥰
This is exactly the video I’ve been looking for, before I strip & refinish our charcoal gray concrete kitchen counter- cannot thank you enough! I’ll try & send before & after pics.
I have worked with epoxy and to me it gives the best finish.
By far the easiest, quickest and best option for concrete countertops!! I couldn't be happier! well done on the video besides the Detroit Tigers bucket go tribe!
Excellent video! As for which finish is the best? They all are, it depends on what it's being used for. Nice heads up on the food safe products also.
Thank you so much Jeff!
We bought a house with pretty beat up concrete counter tops. Don’t think they ever sealed them. There are rough edges, chunks missing on edges(especially around the sink), and they cut right on them so there are scratches and cut lines. QUESTION is, do I or should I sand or do anything else before sealing them? Also, thank you so much for this easy to follow and informative video!!
All of your videos are amazing, thank you so much.
No, thank YOU so much Ralph !
So to your work, I like each sealer, but the epoxy at the end wins for me. To those who submitted their videos, great job fellas!
I was hoping you would make this video. It is perfect timing. I am planning on making kitchen countertops and a breakfast bar but will need to do them in sections to make installation more manageable. Would you recommend sealing before installation or after? I'm mostly concerned if the joint seals will be affected one way or another. And I second the request for a vid regarding stains and such
I would seal before installing but that’s just me. In the end I don’t think it matter. Thank you so much Leslie!
I'm thinking now it's time to do my grill side tables out of concrete. This is so inspiring. Thank you so much for the knowledge!
Great vid bro!!! Thanx for the shout out. Was so cool to see my lil home project on here.
No no no, THANK YOU! I was so happy to see you message pop up because you were the last fella I needed permission from and I was so scared that I was going to have to take you out of the vid lol ! I’m just sad that I didn’t have time to add your latest pictures into the video😢 The new pics you sent me were beyond awesome! Thank you so much for being apart of this whole thing man! 😉👍🏻👊🏻
Wish I would have got you the other ones quicker. Super cool. Alaska winter honey-do list has one less thing on it. Lol
Lol
@@bonahisme Awesome job, Jonah. I've been trying to figure out how to dye the Rapid Set like you did and thought I'd ask how you achieved it? I was thinking something like Cheng Concreter Countertop Pro-Formula Mix might work as an additive, but I'm also hesitant to mix products from different manufacturers as they might not play nice in the long run. Would appreciate the tip! Cheers
tastybarrels9 no problem 👍🏻
Cheng pro formula is a stand alone product line. Super good, but very high-end. This is a much more affordable alternative. As far as the dyes or coloring goes, I used concrete dry pigment. Very cheap for a small one pound bag. I went to my local concrete company and bought it from them. They had a book with many colors to choose from. I tried to get it at Home Depot, but they don’t carry any dyes.
I hope this is helpful. If you have anymore questions feel free to ask.
I love the creative applications your followers used. You make it look soooo easy!
I think I like the first sealer the best overall, especially if I was making a table top or outdoor bar like in your other videos. If I was making like actual countertops for my kitchen or bathroom I think I would go with the epoxy though.
Another spectacular video btw, you really need to quit your day job and move where the weather is nice year around so we can get a couple videos a week lol.
Lol 😂 thank you so much David!
I really liked the ripping of the tape between seals..thank you for doing these videos, they are so enjoyable:)
Oh my gosh thank you so much! 😉👍🏻
Awsome job! I hope to take some inspiration you given me and make some outdoor furniture...but I need to read do the patio first. Thank Mike!
U gave us new perspective for cement application......Hi from Jakarta - Indonesia.
Thank you so much Royke! Hello Jakarta Indonesia 🇮🇩! ☺️
Good work Michael 👍👏
Thank you so much Temo!
Thank you for the inspiration and the simplicity, showing us DIYers how not to over think it.
Great videos bud! I've been wanting to do some concrete molds and your videos are giving me motivation and courage to go for it, gonna incorporate them into a BBQ grilling area! New Subscriber here!
And I don't hit the bell button very often but I did on yours
Thank you so much man! I really appreciate comments like this one!
And welcome to the channel! 😉👍🏻
Thanks for the awesome informative video! I'm definitely going to try this in the kitchen remodel I'm working on. I love how positive you are, such warmth and kindness. Keep up the good work Mike!
Thank you so much Rose! What a great comment! Made my day!
I'm glad Mike! I'll be sure to send you pics when I make my countertops.
Another great video Michael, glad to see you got those Amazon affiliate links.
I think it might be time to order some sealer for my project. ;)
Thank you so much! Yeah this is my first video playing with amazon affiliates. I hope it works out!
Awesome video! I've watched it like 5 times and really like the way you show how these sealers look side by side. As someone famous probably said - don't put in all that work to create a cool counter top only to screw it up by using the wrong sealer or one that you don't like the look of (or that's not food safe). Keep it up.
Love all your videos! I can't wait to get started on making a counter top! And, I know this is weird but I'm going to try and use this method on making head stones for family members. 😀 so thanks and your right, I don't need to watch any other videos.
Thank so much John! Believe it or not You’re actually not the first one to tell me that your making a head stone haha. Thank so much for being a subscriber!
I'd appreciate a hug from this guy
I just found you!! Love your stuff!! And you made me laugh! Thank you! :)
Thank you so much Catherine!
I love the Famwood Glaze Coat! Great video, informative, straight forward and easy to follow directions on how to accomplish the project.
Me too!
Me too!
What do you do if you want to color your concrete counter? Can you add color to the mix that you use and create a granite look or gemstone look?
You absolutely can do all of those things 😉👍🏻. There will eventually be videos on all of it 😊
great job. I have never seen this done before. Gives me ideas.
That’s what I’m talkin about Steven! 👍🏻😉
Epoxy has a great shine
You're a cool dude...super positive and fun to watch. Now that the weathers nice here in Oregon, I'll be doing my first concrete projects using your vids. Thanks for your hard work, i can tell you put alot of effort and care into this.
Thank you so much Brent! That means a lot to me!
The glaze is my favorite!!! I noticed it darkened the stone, and I’m wanting to color the mix when I make my topper. Should I go with a lighter color for the stain if I go with glaze?
Excelente trabajo, un saludo desde México 👍😁
Love your videos! Thank you for sharing.
I don't subscribe to many channels but I like your style. Info is great and to the point. You earned it. Just bought a house, want to pour a coffee table. Will do a few practice ones with diff. sealers to see what I want.
Clay, I CAN NOT begin to tell you how much I love comments like this! It’s already super cool to get people to subscribe to my channel to begin with... but when someone tells me that they don’t usually subscribe to channels in general and they decided to become one of MY subscribers... that feels so good on my heart man! Thank you so much and welcome to the channel! 👍🏻😊
Love ALL your videos, thank you very much❤️
Thank you so much Lela!
You're all killin' it!! These videos make me miss my old shop in my garage. Great stuff man!
We just don’t get to spend enough time in our sheds! Lol
literally excited when you post a new video! my guess is that you are in michigan, like me. what city, if that's not too personal of a question?
Took 2 days to get to watch your newest work of art but so glad I did. Another out of the park success mate, as demonstrated by works inspired your tutorials and the continued exponential growth of the channel.
Ps old man sounds are natural, other old sounds..... well Mama didn’t raise no fool 😉 good job dude
Lol 😂