Guitar E sting and power supply from an old computer works well for me. I connected the string to yellow and black wires from PS, that is 15V. Also green and black should be connected to start the PS. My cutter cuts just a little bit slower than yours.
It might be a good idea to have decent ventilation while doing this. A friend of mine who works in design noted some colleagues had serious health problems after years of hot wire cutting foam for mockups. They probably cut more foam and the fumes were possibly less contained within the foam. Nice work though! Looking forward to your PU build!
Great idea, make a hard pattern that can't burn in seconds atleast, I was surfing the net on how I can control the cutting with only a wire cutter, in a wider distance, thanks
Its always nice to find another Simposons fan. Im betting you have the Simpsons trivia game 😃 I've been wanting to make one of these cutters for rc airplanes, thanks for the tutorial.
Love the video. I have a memory foam mattress I need to reduce the thickness on. I think what you show in your video will work. I’ll have to make a VERY large bow to do it though. I clicked on the link for the transformer you used but they’re sold out. Do you have a recommendation on a different one that would work? Thanks.
Really enjoyed a few of your videos today and this is a great how to. Question... Could you reverse your switches? Putting the dimmer on the bow instead so that you can adjust your wire temp as you are cutting or is that too much strain on the inverter since it would always be on max? Could also print a pulley system like a throttle cable on a motor that would control the dimmer. Just throwing out ideas from one maker to another.
is there wire that isn't straight line? can you make a serrated knife edge by bending a thicker wire? I want to cut it like a defined jaggered line as ONE cut not multiple passes. any ideas?
Your description of the transformer says XFR1012E. In the video you use a XFR1012D. I purchased an E not realizing they were different until I watched the video again to build my hot wire cutter. Will it still be possible to build this with the wrong transformer? Also, I printed the box and it came out beautiful! Thank you for the info, your videos are truly inspiring!
I'm building a 38 gauge nichrome foam cutter with a wire distance of 90cm (35 inch). How much voltage would you estimate I need to make it hot enough to cut foam?
I'm sorry but I didn't see how you wired the bow is white on one end and black on the other end of the nichrome wire also wondering if a 12 volt battery charger would work one clamp on each end of the nichrome wire
can you send me a photo with the label of the current converter to know exactly what to get for its construction ... I want to do the same with half a meter of wire and please tell me how thick the wire is ... I think it is nickel colored so???
I’m trying to figure out something. With all your amazing projects and intellectual proficiency why do certain individuals (a lot of them) say ah, umh and uh? Also, in retrospect of viewing all your replies to the 23 comments, you only respond to praises and don’t/haven’t as yet respond to inquiring questions. With that said, I’m not expecting one either?
Guitar E sting and power supply from an old computer works well for me. I connected the string to yellow and black wires from PS, that is 15V. Also green and black should be connected to start the PS.
My cutter cuts just a little bit slower than yours.
Dude! Thank you soooooooo much! Big help on a project I’m attempting in Saint Helena! Rock sculpture! 😊
I’m a rock sculptor too😅
Appreciate this video! Hoping to make this very soon and get to making some blanks as well. Shipping to NS ain't cheap!
I think it would work for rc plane wings
A very simple design, and works very well
Yes that works great, tried that a long time ago.
It might be a good idea to have decent ventilation while doing this. A friend of mine who works in design noted some colleagues had serious health problems after years of hot wire cutting foam for mockups. They probably cut more foam and the fumes were possibly less contained within the foam. Nice work though! Looking forward to your PU build!
Thanks. Getting ready to make a sailboard or two. thumbs up.
Great idea, make a hard pattern that can't burn in seconds atleast, I was surfing the net on how I can control the cutting with only a wire cutter, in a wider distance, thanks
Its always nice to find another Simposons fan. Im betting you have the Simpsons trivia game 😃 I've been wanting to make one of these cutters for rc airplanes, thanks for the tutorial.
Love the video. I have a memory foam mattress I need to reduce the thickness on. I think what you show in your video will work. I’ll have to make a VERY large bow to do it though. I clicked on the link for the transformer you used but they’re sold out. Do you have a recommendation on a different one that would work? Thanks.
hi, i wanted to ask if any protective equipment should be worn when using a foam cutter since the smell emitted when cutting foam is a bit foul.
Really enjoyed a few of your videos today and this is a great how to.
Question... Could you reverse your switches? Putting the dimmer on the bow instead so that you can adjust your wire temp as you are cutting or is that too much strain on the inverter since it would always be on max? Could also print a pulley system like a throttle cable on a motor that would control the dimmer. Just throwing out ideas from one maker to another.
Very cleaver! Now if you added a panel light to the box to indicate when it is turned on........ (lol) As always thank you for sharing!
Great idea!
Andrew thanks for the video Update! love all your video’s! Keep the Great Job! 🇵🇷
Thanks for watching!
good video like the hot wire cutter Thanks
is there wire that isn't straight line? can you make a serrated knife edge by bending a thicker wire? I want to cut it like a defined jaggered line as ONE cut not multiple passes. any ideas?
Your description of the transformer says XFR1012E. In the video you use a XFR1012D. I purchased an E not realizing they were different until I watched the video again to build my hot wire cutter. Will it still be possible to build this with the wrong transformer? Also, I printed the box and it came out beautiful! Thank you for the info, your videos are truly inspiring!
max power was a car modifications magazine in the uk very popular... but since American gotta be the Simpson's
4:48 are we to believe you used the springs as part of the electrical circuit?
btw, i'm the proud viewer who gave this vid its 666th thumbs up.
I'm building a 38 gauge nichrome foam cutter with a wire distance of 90cm (35 inch). How much voltage would you estimate I need to make it hot enough to cut foam?
Thanks for the info.
From the hair dryer, Homer to the Max
thanks andrew, really really helpfull, now ill try my own first surfboard. greetings from chile :)
I'm sorry but I didn't see how you wired the bow is white on one end and black on the other end of the nichrome wire also wondering if a 12 volt battery charger would work one clamp on each end of the nichrome wire
So where does ''Max Power'' come from. Great video.
Max Power was what Homer Simpson renamed himself.
Thanks, where do you buy a box of springs?
Thank you for the information.........really helpful..👍🏻🇬🇧
Glad it was helpful!
Nice diy tutorial it helps a lot great
The cut at the end of the video, looks pretty ragged. Would you now simply drag the wire a second time, to take out the variations?
Very good
can you send me a photo with the label of the current converter to know exactly what to get for its construction ... I want to do the same with half a meter of wire and please tell me how thick the wire is ... I think it is nickel colored so???
Is Max Power a Simpson reference?
Andrew, Epoxy 101 has a more streamlined way to do this. It’s a dvd series, would you like a copy? Be happy to send you one.
What is transformer input and output bro
Where do you get your huge blocks of styrofoam?
Search online for EPS sheets for insulation
Don't mess with mains power don't touch it use a 12v 2amp wall charger mine is from a cctv camera power adapter safe as battery's
Max Power....football player
A dimmer is a potentiometer about $5
I’m trying to figure out something. With all your amazing projects and intellectual proficiency why do certain individuals (a lot of them) say ah, umh and uh? Also, in retrospect of viewing all your replies to the 23 comments, you only respond to praises and don’t/haven’t as yet respond to inquiring questions. With that said, I’m not expecting one either?