How to Replace Radiator Cooling Fan 06-11 Honda Civic

Поділитися
Вставка
  • Опубліковано 10 лют 2025
  • Buy Now!
    New Radiator Cooling Fan Assembly from 1AAuto.com 1aau.to/ia/1ARF...
    1A Auto shows you how to repair, install, fix, change or replace a broken radiator fan. If your car overheats or runs hot and the radiator cooling fan will not turn on then this may be your solution. This video shows the process for the 06, 07, 08, 09, 10, 11 Honda Civic.
    🔧 List of tools used:
    • Flat Blade Screwdriver 1aau.to/txK/1AX...
    • Phillips Head Screwdriver 1aau.to/txK/1AX...
    • 10mm Socket 1aau.to/tUH/1AX...
    • 17mm Socket 1aau.to/taa9/1A...
    • Needle nose pliers 1aau.to/tiY/1AX...
    • Needle nose pliers 1aau.to/tiY/1AX...
    • T30 Torx Driver 1aau.to/tp4/1AX...
    • Ratchet 1aau.to/t5k/1AX...
    • Socket Extensions 1aau.to/taa9/1A...
    • Rust Penetrant
    For More Info visit us at 1aau.to/h/bcw/
    ⚠ DISCLAIMER:
    While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

КОМЕНТАРІ • 37

  • @1AAuto
    @1AAuto  4 роки тому +2

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
    √ *Do it Yourself*
    √ *Save Money*

  • @brianwilson1145
    @brianwilson1145 5 років тому +11

    You do not need to remove the battery or coolant hoses if you are just removing the ac condenser fan. Thanks for the tutorial! Saved me a bunch of time

    • @1AAuto
      @1AAuto  5 років тому +4

      +Brian Wilson Thank you for your positive feedback! We are happy we could help.

  • @TwamM2356
    @TwamM2356 8 місяців тому +2

    Thank you so much for this video! Saved me hours of headache and lots of money.

  • @josephharris2224
    @josephharris2224 6 років тому +3

    Hello Thank you all so very much for posting this video! The install of my new fan went without a hitch. Wonderful execution of instructions. Keep up the good work!.

    • @1AAuto
      @1AAuto  6 років тому +1

      +Joseph Harris Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY

  • @ivette9719
    @ivette9719 4 роки тому +1

    Thanks for the video. Installed in about 25min. Perfect instructions

    • @1AAuto
      @1AAuto  4 роки тому +1

      +Mario Astorga Thanks for checking us out! 1AAuto.com

  • @AccordingToScripture
    @AccordingToScripture 6 років тому +9

    2006 Civic. I changed my condenser fan without disassembling anything. Unplugged it and a couple clips. Removed the two retaining 10mm bolts and it slid right out. No problem.

    • @normangirigorie886
      @normangirigorie886 6 років тому +4

      You will need to follow this procedure if you are to change the radiator fan motor.

    • @cakepower1
      @cakepower1 3 роки тому

      I did the same thing for the condensor fan, I didn't have to remove the radiator support for the condensor fan. But for the radiator fan I had to remove the rad support peice like in the video as it blocks the top screw mounts from the radiator fan from being moved to the side.

  • @greenbean9504
    @greenbean9504 10 місяців тому

    Always great videos from 1A auto!

  • @normangirigorie886
    @normangirigorie886 6 років тому

    Thanks for the video.
    It worked. But rather than pushing the clips that actually act as support for the cable harness, I preferred to cut the corresponding tie wraps and install new ones. Doing this you will keep the brackets in place and avoids damaging them. You need to be careful though when cutting the tie wraps.
    Norman from Curaçao

  • @anthonymoore8480
    @anthonymoore8480 7 місяців тому

    Great tutorial 👌 Excellent job 😊

  • @cas1051
    @cas1051 8 місяців тому

    Fantastic video!! Thank you so much!

  • @anthonymoore8480
    @anthonymoore8480 7 місяців тому

    Great tutorial!😊

  • @gerardopalma1300
    @gerardopalma1300 4 роки тому +1

    Great Job!

    • @1AAuto
      @1AAuto  4 роки тому +1

      +Gerardo Palma Thanks for the feedback!

  • @markpilon6959
    @markpilon6959 2 роки тому

    Thank you for thus video

  • @camronconatser9759
    @camronconatser9759 Місяць тому

    Is this the same for the 8th gen si’s

  • @ernz222
    @ernz222 4 роки тому +1

    Hi, is there a difference between the Engine cooling fan and A/C Cooling fan in terms of the motor? I am looking to replace just the motor!

    • @1AAuto
      @1AAuto  4 роки тому +2

      +Ernie M Yes, there will be a difference between these two parts. Thanks for checking us out! 1A Auto

  • @martinsalinas8606
    @martinsalinas8606 5 років тому +1

    Looking down like he is installing, the fan on the left is the ac condenser fan and the fan on the right is the radiator fan?

  • @chino098423
    @chino098423 4 роки тому

    Hello friend, I hope you are well .. I have a Honda Civic SI 2007, it only has 1 fan, does it affect that I only have 1? Or the 2 are needed

  • @kubilaycay2614
    @kubilaycay2614 21 день тому

    Merhabalar kaç derecede fanı açması gerekiyor teşekkür ederim

  • @LynWeeD
    @LynWeeD Рік тому

    When I try to place the radiator with the cooling fan in place on the bottom slots there's a black plastic piece on both sides of the radiator that is blocking me from being able to do this. Any idea how I can take that part off.? It's needs to come off

  • @papp112
    @papp112 5 років тому

    How is it the new AC condenser fan doesn't have a relay like the old fan ? And is it necessary? Because I'm replacing my fan motor only n the new motor doesn't have the relay looking box?

  • @nosaj03
    @nosaj03 6 років тому

    Can you tell me what size bolt is used to mount the fans?

  • @ModernDayRenaissanceMan
    @ModernDayRenaissanceMan Рік тому +1

    Wayyyy past my skill level. It sucks being broke & mechanically impaired

  • @Michael-fw5ef
    @Michael-fw5ef 5 років тому +2

    Could you go from underneath the car and avoid having to remove so much from the beginning?

    • @wtrdogg20
      @wtrdogg20 4 роки тому

      Not really... The fan bolts are on the top.

  • @alejandromorazan3420
    @alejandromorazan3420 Рік тому

    To the guys in the comments that did this, what issues were you having?

  • @jgehbinv
    @jgehbinv 4 роки тому

    Can each fan be ordered from 1A Auto and if so, how much does each cost?

    • @1AAuto
      @1AAuto  4 роки тому

      +Jeff G The fan in this video, part number 1ARFA00196 is currently listed at $59.95. Please be advised, prices can change without notice. Thanks for watching.

  • @mariorobert5102
    @mariorobert5102 5 років тому

    could