Interested in a 3rd function kit? Contact us at www.simplycountry.net. Is there something you'd like to see installed next? Let us know in the comments!
Wow, this requires some big nuts to modify if a simple owner of a new tractor. "Weld bracket onto tractor loader", "Cut wiring harness" and.....remove your loader joystick, get out ye'old hacksaw, and cut off the handle". Very nice video. Seems like you could do this blindfolded. I really have to be motivated to do this....much harder for me. In the mean time, a 15' chain from tractor supply will fit my needs. The 3rd function is still on my wish list. Professional quality video and clear instructions. Thumbs up from me and thanks for the enlightenment and taking the time to make such a clear video.
Thanks for making this video. I have a xr3135h and am always looking for content to watch about LS tractors. I hope to see many more videos from you. Cheers!
I’d love to see a grapple install on this same tractor. I’m looking to buy a xg3135h or xr3135h soon and really interested in using a grapple for brush clearing and picking up logs
Got a question. I have an LS MT230e, with a hydraulic leak, coming off of an elbow, from what looks like, the hydraulic pump (I’m guessing), on the front-right side, of the lower part of the engine. Right behind the right-front wheel assembly. I think, replacing the elbow, will do the trick. However, I’m not sure, if there is an internal rubber grommet, above the elbow, where the leak is coming from. Please note, it’s only leaking (rapidly, usually just a slight drip), when elevating the bucket loader. Thank you.
@@thetedster16 I was able to fix mine on my own, without taking it to the stealership. There is a rubber grommet at the top end of the elbow. It somehow got pinched. Although, getting to it was a bit of a trick, I was able to find a replacement very quickly, and cheaply. It’s just a 15mm rubber O-ring. Haven’t had a problem since.
How similar of an install is this video compared to a newer MT240HEC, I have a power beyond for the backhoe that I'd like to replace with a rear remote and third function but not many people have videos showing any of this
It really would be nice if they had put a link to the kit on there web page so that we can see the prices of the kit. BTW I've seen this kit installed underneath near the filter under the floor.
I've been checking back to see if they will give you the info but it must be Top Secret lol When I'm ready to do mine I'm going to just take out the top and bottom banjo bolts and go to my local Tractor Supply and match them up. I suggest you do the same. Good luck.
I HAVE A TZ24DA N/H CAN U HELP ME WITH A 3RD FUNCTION VLV. I LOVE THE WAY U DID THE VIDEO, IM LIEARNING DISABLE SO MOST OF THE VIDEO'S I WATCH ARN'T SO EXPLICIT. TKS AGAIN. GREENSBORO, MD.
I would be sooo mad if i found out an installer (anywhere) cut my brand new factory harness and most likely voided the warranty. You're better off running the power to the battery with a fuse. Please don't advice people to cut their harness !
Stupid position ¡ who in their right mind would put that monstrosity on the outside of the frame ? Especially if you are going to be doing grapple work! Just asking for an accident headache You see what happens to lights on the outside of the rops
Interested in a 3rd function kit? Contact us at www.simplycountry.net. Is there something you'd like to see installed next? Let us know in the comments!
Would this work on a new holland workmaster 35? As well as the rear remote setup shown
Why has the account for the link, been suspended?
Wow, this requires some big nuts to modify if a simple owner of a new tractor. "Weld bracket onto tractor loader", "Cut wiring harness" and.....remove your loader joystick, get out ye'old hacksaw, and cut off the handle". Very nice video. Seems like you could do this blindfolded. I really have to be motivated to do this....much harder for me. In the mean time, a 15' chain from tractor supply will fit my needs. The 3rd function is still on my wish list. Professional quality video and clear instructions. Thumbs up from me and thanks for the enlightenment and taking the time to make such a clear video.
Thanks for making this video. I have a xr3135h and am always looking for content to watch about LS tractors. I hope to see many more videos from you. Cheers!
You will! More videos to come.
I have an orange tractor...great step by step video...come on orange guys, can we get a video as good as this?
Perhaps we can get a kit for your "orange" tractor too. :)
I’d love to see a grapple install on this same tractor. I’m looking to buy a xg3135h or xr3135h soon and really interested in using a grapple for brush clearing and picking up logs
@@aleiweke Great Idea! We have installed grapples before and can likely make that video happen. :)
And of course if you buy the tractor from us, we can install it for you prior to delivery.
@@aleiweke Here's a Grapple on the XG3135H. (And the tractor is for sale) ua-cam.com/video/NcSy1oGK15s/v-deo.html
Got a question. I have an LS MT230e, with a hydraulic leak, coming off of an elbow, from what looks like, the hydraulic pump (I’m guessing), on the front-right side, of the lower part of the engine. Right behind the right-front wheel assembly. I think, replacing the elbow, will do the trick. However, I’m not sure, if there is an internal rubber grommet, above the elbow, where the leak is coming from. Please note, it’s only leaking (rapidly, usually just a slight drip), when elevating the bucket loader. Thank you.
Had the same issue with my MT240hec, dealership fixed it under warranty they said its very common
@@thetedster16 I was able to fix mine on my own, without taking it to the stealership. There is a rubber grommet at the top end of the elbow. It somehow got pinched. Although, getting to it was a bit of a trick, I was able to find a replacement very quickly, and cheaply. It’s just a 15mm rubber O-ring. Haven’t had a problem since.
can you install a true 3rd function on a LS MT 225s thanks, Brian
How similar of an install is this video compared to a newer MT240HEC, I have a power beyond for the backhoe that I'd like to replace with a rear remote and third function but not many people have videos showing any of this
What kit and how much is the one for my LS XG3025 shipped to 02859. Also do you have an install video for my unit?
It really would be nice if they had put a link to the kit on there web page so that we can see the prices of the kit. BTW I've seen this kit installed underneath near the filter under the floor.
I need this kit for a mt 2 30e
Do you have a kit for a MT 225 HE......AND INSTALL VIDEO....
How can you install extra lighting on the lsmt350e?
would you install a 3rd function on a 2019 XR3135H ,they look different from the XG3135h ,thank you
I would like to see a third function valve installed a LS XU 5055 tractor
that T line does that run back to tank ??
Do you make a kit for an ls xj2025 and how much it if you do.
What is the thread size of the two adapters that replaced the banjo bolts?
I've been checking back to see if they will give you the info but it must be Top Secret lol
When I'm ready to do mine I'm going to just take out the top and bottom banjo bolts and go to my local Tractor Supply and match them up. I suggest you do the same. Good luck.
Could I have a price for 2017 XG 3140 H for 3rd function, shipped to 29037
Would like to see it put on a mt350e
Where did you get that brush guard from???
How come you are not covered in grease and oil? That what happens to me working on my old Ford 4000!
I'm looking for this kit to install on a XJ2025. Do you sell them or know where we can order LS parts?
Nice job!
I HAVE A TZ24DA N/H CAN U HELP ME WITH A 3RD FUNCTION VLV. I LOVE THE WAY U DID THE VIDEO, IM LIEARNING DISABLE SO MOST OF THE VIDEO'S I WATCH ARN'T SO EXPLICIT.
TKS AGAIN. GREENSBORO, MD.
👍
I would be sooo mad if i found out an installer (anywhere) cut my brand new factory harness and most likely voided the warranty. You're better off running the power to the battery with a fuse. Please don't advice people to cut their harness !
Stupid position ¡ who in their right mind would put that monstrosity on the outside of the frame ? Especially if you are going to be doing grapple work! Just asking for an accident headache You see what happens to lights on the outside of the rops