Thank you so much sir, it worked well on my ball, i really needed this video cause i had to perform volleyball in my class, and i was shocked when i inflated the ball with air ang suddenly heard a hissing sound, thank you so much sir, i hope your channel grows!
Hey iam also facing the same ......my ball is all good but air ia leaking from valve ......i changed many pins but still air is slowly getting out .plz help
Broah , you r genious i watched to many video before this and everyone showed to change valve which is not available , but u just done it easily from home tools , amazing brother and thnx for making it in english . Respect +++
Works awesome. Thx man. For luprication you can also use Shampoo. I put a 3-4 mm rubber stip in there. Did not even push it in a lot just a little and the cut the rest that was standing out of with razor knife.
Hello my friend, I have a question. What happens when you need to pump the ball again? should you pull out this piece of rubber each time and start the process over? I am wondering if you risk pushing the rubber all the way inside the ball
Good question. Eventually you'll have to pump the ball again. You can use the lube in order to insert the needle and see if the ball stays inflated, otherwise you'll need to repeat the process (most times it's like this). I guess the piece of rubber degrades over time. If you push the piece inside accidentally it's no big deal either (I've experienced all of the previous instances).
The rubber streak comes from a punctured bike inner tube. However, you can also use a thick elastic band. The glue thing is a water-based lube. You can also use soap and water.
Hi. That rubber streak blocks the outflow of air from within the ball when the valve does not create a complete seal. It works like a patch. The streak must go in just as much as to let the air from the needle to pass through into the ball (that's about 15 mm). It works well, but sometimes repeating the process is necessary if the a complete seal has not been created on the first attempt. I've done it countless times with many different balls and always works.
No, sir, that's not necessary every time. Actually, if the fix is properly done there will be no need to inflate the ball anymore, but if it's necessary, the inflating needle can go in easily with proper lubrication.
Hi sir. I don't know how I could better help than what I show in the video. You can watch the video in Spanish, you don't need to understand but follow what I do. Remember you can use water and soap as lube to insert the needle and any thick elastic band. You can try several times if it doesn't work at first. Note that if the leak does not close you need to seal it with an elastic band that has a flat profile, not round, as the valve is flat inside even though it looks round outside.
No, just lubricate the needle and insert and remove carefully. If the fix starts leaking, you can perform a new one. It will work if done properly (I've fixed the same ball many times).
@@rianjameso.zamora2173 I very glad to hear that. That was exactly my motivation when I shared this video, to help people keep having fun with their favourite sport and ball.
@@charan3925 you can re-inflate the ball without removing the rubber strip if you lubricate it well. If it doesn't work, I advise to insert a new strip, because a new one will seal the leak better.
This worked perfectly!!! Just saved me from throwing away a $80 ball that was only played with for one season. Thank you!!!!
Thank you for your feedback! I'm so glad it worked for you too!!!
Thank you so much sir, it worked well on my ball, i really needed this video cause i had to perform volleyball in my class, and i was shocked when i inflated the ball with air ang suddenly heard a hissing sound, thank you so much sir, i hope your channel grows!
I am so glad it worked for you also. I keep fixing balls using this method and it always works.
Hey iam also facing the same ......my ball is all good but air ia leaking from valve ......i changed many pins but still air is slowly getting out .plz help
I completely forgot about this trick, I've done it on all sorts of tires but forgot the same concept applies here, thanks bro!
Exactly. I got the idea from a puncture repair on my car. Glad you find it useful 👍
Broah , you r genious i watched to many video before this and everyone showed to change valve which is not available , but u just done it easily from home tools , amazing brother and thnx for making it in english .
Respect +++
Thank you very much for your feedback. I'm glad it helped.
Works awesome. Thx man. For luprication you can also use Shampoo. I put a 3-4 mm rubber stip in there. Did not even push it in a lot just a little and the cut the rest that was standing out of with razor knife.
Thanks for your contribution
Thank you for this! My Beach Champ leaks as well
Hello Pablo,
thank you, my Mikasa is like a new one! Greetings from Italy!
Markus
Excellent. I'm glad it also worked for you!
THANK YOU SO MUCH MAN MY VOLLEY BALL VALVE KEEPS LEAKING I FOUND THIS VIDEO IT WORKS THANK YOU SO MUCH MAN
Worked like charm. Thanks!
Thank you so much it works. Also this was a great video it needs more views! :)
Thanks you for your comment. I am glad it worked for you also. You can help make this video more popular if you hit the LIKE button. Enjoy your games!
thanks my brother I repaired my basketball u save my father's hard earn money 💰
Soap and water work fine as a lubricant and my valve is fixed. Thanks
I am so glad that worked for you!
Yes, it should work on any ball if done properly
Thanks it Worked !!! 🏀🏀
Muchas gracias. Funciono!
Me alegro. ¡A disfrutar!
Thanks it works!!
Does it work for football ⚽?
Hello my friend, I have a question. What happens when you need to pump the ball again? should you pull out this piece of rubber each time and start the process over? I am wondering if you risk pushing the rubber all the way inside the ball
Good question. Eventually you'll have to pump the ball again. You can use the lube in order to insert the needle and see if the ball stays inflated, otherwise you'll need to repeat the process (most times it's like this). I guess the piece of rubber degrades over time. If you push the piece inside accidentally it's no big deal either (I've experienced all of the previous instances).
Where can you get the rubber streak? and what is the glue thing?
The rubber streak comes from a punctured bike inner tube. However, you can also use a thick elastic band. The glue thing is a water-based lube. You can also use soap and water.
Hi what you do if it os leaking around the Vale? Thanks
That's more complicated. I've never seen that issue before, so I can't help you with that. Sorry.
Didn't get anything at all. What that rubber streak does? How deep it reaches and how the air passes through it but doesn't leake back?
Hi. That rubber streak blocks the outflow of air from within the ball when the valve does not create a complete seal. It works like a patch.
The streak must go in just as much as to let the air from the needle to pass through into the ball (that's about 15 mm). It works well, but sometimes repeating the process is necessary if the a complete seal has not been created on the first attempt. I've done it countless times with many different balls and always works.
bro I couldn't understand what he is doing can someone please explain it😢😢😢😢
Whqt are the dimensions of your rubber? Its very hard to eatimate
About 3mm wide and 3 cm long
In which direction you pushed rubber inside the ball ?
Straight down
do you need to do this every time you inflate the ball? with a new rubber strip
No, sir, that's not necessary every time. Actually, if the fix is properly done there will be no need to inflate the ball anymore, but if it's necessary, the inflating needle can go in easily with proper lubrication.
Hey man can you contact me and help me with my case please😢
-my valve is only sticking to the bladder and not the ball cover
What should i do pleas
Hi sir. I don't know how I could better help than what I show in the video. You can watch the video in Spanish, you don't need to understand but follow what I do. Remember you can use water and soap as lube to insert the needle and any thick elastic band. You can try several times if it doesn't work at first. Note that if the leak does not close you need to seal it with an elastic band that has a flat profile, not round, as the valve is flat inside even though it looks round outside.
hello, someone can tell me where I can buy bladders butyl and valves rubber for soccer balls shipping to Italy.
Valve online mil sakta he kiya
do i need to remove the rubber if i want to inflate the ball again?
No, just lubricate the needle and insert and remove carefully. If the fix starts leaking, you can perform a new one. It will work if done properly (I've fixed the same ball many times).
@@jupavero thankyou for this video you helped me,cause im super bored cause i can't use my ball but i saw your video thankyou so much
@@rianjameso.zamora2173 I very glad to hear that. That was exactly my motivation when I shared this video, to help people keep having fun with their favourite sport and ball.
Will i be able to use this same method on a puncture on the ball instead of the valve itself?
I don't think so. I've never tried it. But you can do it and share with us if it works
prob not. patch it.
How to get that tire rubber thing???
From an old inner tube of a bike or a simple flat elastic band.
Thank u so much 👍 @@jupavero
Super
my valve went inside the ball how to get it out
There is no way to get it out. I have that issue with one of my balls, but that doesn't affect its playability.
What if I have put air again
I don't understand the question. The ball can be inflated many times following the steps in the video.
@@jupavero no u put the tape above it should I have to remove it again to put air in it then it leaks again right
@@charan3925 you can re-inflate the ball without removing the rubber strip if you lubricate it well. If it doesn't work, I advise to insert a new strip, because a new one will seal the leak better.
I did not see the way you inserted It in to the ball th
Fold it in half and push it into the hole with the help of the needle and the lubricant solution.
Kamasutra!
Stfu man 🤣 i know about this medicine ass hole
Those balls Ayo what you mean by that bruh
Sus
I don't understand your question, sorry.