Repairing Midway's Famous CRUIS'N Exotica Arcade Machine.... Vintage Nintendo LCD Swap ?
Вставка
- Опубліковано 16 вер 2024
- Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
This is our USA Amazon Link: amzn.to/3qwgVQU
This is our UK Amazon Link: amzn.to/31aKGaC
This is our Canadian Amazon Link: amzn.to/2Ycu5RQ
This is our Australian Amazon Link: amzn.to/34UvvVl
This is our German Amazon Link: amzn.to/3hh2QgI
----------------------------------------------------------------------------
We can be reached at this email address: LyonsArcade@carolina.rr.com
Get Merchandise, T-Shirts, Mugs, and links to all the tools and parts we suggest for repairs on our website at www.LyonsArcade...
---------------------------------------------------------------------------
All Music Provided by www.BenSound.com !
See all our other Machines for sale, right now, at www.LyonsArcade... !
See My Brother Donnie's Awesome Channel at : / @mybrotherdonnie
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Somewhere out there, there's a guy (or gal) with 3 or 4 Cruis'n seats and no cabinets, just praying someone comes along to buy them. Nicely done, Joe.
I love how Joe's got Ron's "c'mon now..." spiel at 3:44 🤣
He started it!
Same. My fad and I played crusin the world on the N64 for hours at a time.we counted how many segments each of us won. I miss my dad. He brought me into the arcade world. Got me interested in repairing pinball and arcade games. I'm thinking of getting back in. You have rekindled my interest.
My dad lol typo
I know it’s frustrating when you can’t repair something. I absolutely hate part swapping . But sometimes it’s all you can do . Micro soldering is tricky stuff. Need a microscope just to be able to see . And without schematics it’s even harder . You did good Joe! Great video , keep em coming!
I’d like to see you do a video sometime of how you tape off that plexi glass and paint it. It looks awesome!
Never played any driving games but this looks like it’s lots of fun. Great work in bringing it back from the dead.
Hey the Joe repair way is always the best way 👍👍⭐️
nice repair vid again - that vga cable is an extension
Come on Joe, Joe, Joe, Come one now...LOL...Looks much better than when you got it, that's for sure.
Good work and a great video as always, Rush 2049 is the arcade driving game I've always wanted.
All that hard work getting it working good and looking sharp and they rob you of first place at the last second! No respect at all! C'mon people don't be doing that! 😛
Looks good - another one saved somebody is going to have a lot of fun playing this one! Thanks as always for sharing! 😃
Bottom of the image is cut off, on the monitor. Might need some adjustments in the settings.
Other than that, it looks great.
Ha Joe. I know what you meant about surface mount components. Thay were a real eye opener when I first saw them. A relation was fixing the remote key fob for a car. I couldn’t get my head round how small they were and no wires sticking out the ends. He just laughed and said that things were going to get smaller and he was so right. So iam with you prefer the older stuff. Great work another one going. 👍. Bob
I went to Winthrop; so sad I never got to see your store!! :*( I will have to stop by one of these days!
Come on down, we're about a mile away!
Great video, Looks great. Turned out nice. Looks like a very cool game. See you on the next video Joe.
So nice and clean. I was playing someone’s cruisin world recently thinking how nice his resto was and this blows it away.
Seeing all your videos I'm so sad I dont live in the USA to buy some of your pinball & arcade machines. Overseas they're way more rare & expensive, hard to get repaired and shipping them (at least the pinball machines) from the US is asking for problems too. Even in the Arcade Hall I visited this weekend 20% was broke 😢
Super racing cabinet super restauration work and SUPER race at the end there as well!! I LOVE this one!!!
ITs BROKE! Never gets old :)
It says Nintendo on it because Nintendo and Midway worked on the hardware together. Eugene Jarvis, the guy who programmed Defender also programmed all of the Cruis'n arcade games, afaik.
I love that you don't just repair stuff, you take the time to restore things and do it right. Shame about the other board, but yeah those surface mount components are a huge pain to deal with. Some day I'll buy some junk boards and learn how to do it properly before trying it on something I care about.
I am still waiting for you guys to do a APB!
Wait No more!
ua-cam.com/video/sTAMgpfp_4I/v-deo.html
Sometimes you can take scratches out of a lcd screen with a pencil eraser. I had an old monitor it worked on.
Ok, maybe not that scratch.
I know what's wrong with it. It's broke.
But what's wrong with it
Brother that fan is loud but these machines did kick out a lot of heat …🔥
Why is half the bottom picture missing speedometer shouldnt be cut in half and it should tell you the speed on the left?
It has a few different Aspect Ratio Settings, I just had it on the zoomed in one
Thanks for watching
I wish I lived closer, I would probably buy a seat less racer. But shipping costs to Michigan Im sure is unreal
Great Job Joe! I say you were Robbed in that race at the end though! 😀
I had the same problem with the washed out video picture. Has to mess with the clamp settings on that video converter board
Zeus II hardware using a TMS320 DSP and FPGA-based geometry engine- very expensive way of doing things but that's what you had to do back then to get that kind of performance. I say get rid of the silly fan- it will run just fine without it.
Joe where do you get your converter board from?
excellent video! btw why was a crt swap not possible? did they do something to it that makes crt impossible to run?
Medium Resolution 25 inch monitors are pretty tough to find
@@LyonsArcade ah that's fair. this looks amazing too! great job! 😎👍
My guess is that the LCD was installed because of the CRT died and CRT replacements were no longer available. So it was probably cheaper to install a CGA/ EGA to VGA (or HDMI) converter and install an LCD computer monitor.
Hey Joe, the purple small board you handle @14:00 that converts the game-board output to VGA, do you sell that board? If not do you know where I can find them?
What was that tiny adapter you used instead lf the gbs board? I want one!
Hey Joe!!
Hey Jason!
What I wanna know is have any of these things blown up when power turned on???? Sparks fire. Etc etc....
Had some sparks from time to time, always got machine turned off before it got any worse
Thanks for watching!
Hi Joe! Question: Where do you send off to get those boards repaired that have the floating caps? I have a board that needs servicing and just wanted to know if you could point me in the right direction? Thanks
Shame about the screen damage ....maybe they got it free coz of the scratch and it was better than what was in it?? Anyway, perhaps you could set it up as a test bench monitor....doesn't take up much space mounted on the wall??
What is different about those SnapHat Batteries compared to using a Coin Size Battery?
Does that cruisn exotica come with the 5 spd manual gear shiftee?
Looks like maybe the upper AD converter board failed, they got the other one and never put the correct Male to Male cable to it.
How do you calibrate the arcade in the 23:43???please!
It tells you on the screen exactly what to do when you calibrate it
@@LyonsArcade Where is the slot machine?
Looks like a large part of the bottom of the screen is cut off
quick question. Why didn't you just use the cabinet in the truck? You had the seat for it with this one? Just an observation. Not being snarky or anything, but couldn't you get more money if it was in the "parts" cabinet? Seeing that it was an exotica game in a cruisin' cabinet maybe I just don't understand? Great job though.
I'm going to fix them all so it didn't matter to me, I already had the other cabinet at the store.
Thanks for watching
..... it's an Hp... That's the self destructing monitor.... The polarizer film on that range of monitors has a tendency to age out and fall apart. So even if you played around and test the game the Monitor either needs to be refilmed or replaced. To refilm it you'd have to hunt for the right polarized window tint that you'd put on a car to fix it if you wanted to fix the monitor and still use it. Otherwise find your local e-waste disposal company and send it.
edit: The HP logo gives you a date range of when the product was made. (Hp used that logo from 06-14) and the older monitors had the polarizer flaking off for years.
1:59 but cruis'n exotica was also released on Gameboy color
Where do we get the video to vga adapter?
Awesome work. I can't believe how much garbage work you guys find on these machines. It has to be kids working on them. LOL
Good Morning U-All.
Yodelayheehoo
What is the video conversion board that you are using?
The green one was a GBS, the purple looks like a goldfinger.. can't see the model number sadly.. Edit, found it gdf-209316
Thanks. I have a pair of Rush the Rock's and have used the GBS on one of them.
@@zosofan I've turned a gbs into a decent upscaler using gbs-control and a esp32
Hi!!
How much for the house of the desd cabinet
Why is it so loud?
That great big fan, once the back is put back on you won't hear it. Even if you do, they sell replacement fans that are quieter, or just get some foam padding and add it to the inside of the machine to muffle it. In a noisy arcade, nobody is going to hear it anyway.
You were robbed. GG
what happened to your voice
Guess what?? It's Broke!! hahhahahahha
21:45 ...and everyone knows that @nobodylikesonions