Still blows my mind you watch my content! Most of my viewers are children so I don’t like encourage putting harmful ingredients into these web-shooters. But yes, they do have various applications 👀
@@TheHumanSpider you are doing it wrong, so I NEED TO give you the right things: Adjusted Recipe for Strengthened Polymer: Materials: Ethyl Acetate: 100 mL Salicylic Acid: 5 g Potassium Carbonate: 1 g Glutaraldehyde: 0.5 g (crosslinking agent) Nanocellulose: 1 g (reinforcing filler) Diethyl Phthalate: 1 g (plasticizer, optional) Procedure: Prepare the Solution: 1. In a beaker, add 100 mL of ethyl acetate. Dissolve Salicylic Acid: 2. Gradually add 5 g of salicylic acid to the ethyl acetate while stirring until fully dissolved. Add Potassium Carbonate: 3. Stir in 1 g of potassium carbonate until it is fully dissolved. Incorporate Glutaraldehyde: 4. Add 0.5 g of glutaraldehyde and mix well. This will act as a crosslinking agent to strengthen the polymer. Add Nanocellulose: 5. Slowly add 1 g of nanocellulose to the mixture, stirring to ensure it is well dispersed. Add Plasticizer (Optional): If desired, include 1 g of diethyl phthalate to improve flexibility. Heat and Polymerize: Heat the mixture to 60-70°C (140-158°F) and stir continuously. Allow polymerization to proceed for several hours. Cool and Purify: After polymerization, allow the mixture to cool. Wash the polymer with methanol to remove any unreacted chemicals. Dry the polymer completely. Test the Material: Evaluate the strength, flexibility, and web-like properties. Adjust the formulation as needed based on test results.
Me and my dad just worked on making the homecoming style webshooters and we used C02! It was working but then it leaked so I had to clean it up and find the leak. I took it all apart, found the leak (it was at the epoxy bit as well as a coupler we bought that needed some thread tape to stay put) and fixed it so hopefully I'll get it working tomorrow! Your videos have been so helpful and I'm so excited to start doing things like this because I love this sort of stuff and would love to make my own designs and formulas eventually. So yeah thank you so much! You're awesome!
U should try to make ps4 webshooters but if u do make ur own cartridge using a disposable lighter valve and small circular tube or sm for the cartridge
I cant find the vid on how to make evaporation web fluid plus can you make more web shooters plus the evaporation fluid cartridges i really wanna buy one 👍
im guessing these were the expensive refillable cartidges because there threaded but im curios what nozzel system did you use with these spcifically the nozzle system
Sir I need you to do a how to make web fluid video from the spray bottle web shooter because I need this done by Friday November 15 2024 please it’s for a science project please and thank you
I was a little kid when I first saw your video and here I am with my first job and college last now..Damnn
please can you give me one
The legend is back!
I missed you so much man
Nice work! That would make a perfect wrist mounted pepper spray.
Still blows my mind you watch my content!
Most of my viewers are children so I don’t like encourage putting harmful ingredients into these web-shooters. But yes, they do have various applications 👀
@@TheHumanSpider hi I am a kid but can you give me one or make a vedio that you say the couteneebts that has the web fluid please
@@TheHumanSpider you are doing it wrong, so I NEED TO give you the right things:
Adjusted Recipe for Strengthened Polymer:
Materials:
Ethyl Acetate: 100 mL
Salicylic Acid: 5 g
Potassium Carbonate: 1 g
Glutaraldehyde: 0.5 g (crosslinking agent)
Nanocellulose: 1 g (reinforcing filler)
Diethyl Phthalate: 1 g (plasticizer, optional)
Procedure:
Prepare the Solution:
1. In a beaker, add 100 mL of ethyl acetate.
Dissolve Salicylic Acid:
2. Gradually add 5 g of salicylic acid to the ethyl acetate while stirring until fully dissolved.
Add Potassium Carbonate:
3. Stir in 1 g of potassium carbonate until it is fully dissolved.
Incorporate Glutaraldehyde:
4. Add 0.5 g of glutaraldehyde and mix well. This will act as a crosslinking agent to strengthen the polymer.
Add Nanocellulose:
5. Slowly add 1 g of nanocellulose to the mixture, stirring to ensure it is well dispersed.
Add Plasticizer (Optional):
If desired, include 1 g of diethyl phthalate to improve flexibility.
Heat and Polymerize:
Heat the mixture to 60-70°C (140-158°F) and stir continuously. Allow polymerization to proceed for several hours.
Cool and Purify:
After polymerization, allow the mixture to cool. Wash the polymer with methanol to remove any unreacted chemicals. Dry the polymer completely.
Test the Material:
Evaluate the strength, flexibility, and web-like properties. Adjust the formulation as needed based on test results.
@@TREXYT1interesting… Have you tested it yourself?
@@YugiFFVII no but I did alot of researching
Me and my dad just worked on making the homecoming style webshooters and we used C02! It was working but then it leaked so I had to clean it up and find the leak. I took it all apart, found the leak (it was at the epoxy bit as well as a coupler we bought that needed some thread tape to stay put) and fixed it so hopefully I'll get it working tomorrow! Your videos have been so helpful and I'm so excited to start doing things like this because I love this sort of stuff and would love to make my own designs and formulas eventually. So yeah thank you so much! You're awesome!
Excellent work as usual!
Aye big fan dude
@@Diaryofpravpreciate you!
Missed seeing your videos !
Amazing job!!!
it may not shoots string like web but it's still pretty freakin cool man
It's been so long. Glad to have you back man!
What type of CO2 cans are those?
Thanks for coming back man
beautiful work!!
It's been so long ma guy 🫂
You should lowkey make a electric web shooter, kinda like in tasm 1
Nice
Awesome
Take my money
“It’s not always about the money Spider-Man”… but link in the description.
This is nuts man!!
I like more the end of the video where the webs are more dense!
Yoooo he’s back!!!! We’ve missed you😊
Bro how you make the last co2 shooter vid work is something like a valve tell me!!!!!!!
It was great work, but the Evaporation web shooter looked cooler. Still looks amazing!
HE'S BAAACK u got to upload more man
How long does it take to design and execute these studies, man? It felt like a century to me! 😂
It usually ranges from 1-2 weeks. I’m not constantly working on this stuff
So it can hold any weight
Nice bro!!!
Yo please sell this or give me a shopping list lmao
U should try to make ps4 webshooters but if u do make ur own cartridge using a disposable lighter valve and small circular tube or sm for the cartridge
How do you make the web shooter's and the web fluid
Do you still sell these on Etsy, I noticed there wasn’t anything on your store
And it can make web bombs and splat
How may I purchase a custom request from you?
¿How to download the 3D model now what your patreon and etsy page dont exist now?
What size Co2 cartridge?
I cant find the vid on how to make evaporation web fluid plus can you make more web shooters plus the evaporation fluid cartridges i really wanna buy one 👍
What chemicals are ?
how do you connect the c02 catridge to the web shooter pls explain
what program u use to 3d model
I want to buy the one on etsy can you make more and more refils for the web fluid
Evaporation one
Pls make more or 3d prin files for the evaporation ones
Where can i get the cardridges repressurized with co2? Will a paintball place do it?
im guessing these were the expensive refillable cartidges because there threaded but im curios what nozzel system did you use with these spcifically the nozzle system
Oh my god… HE’S BAAAAAAACKKK
I'll take it
cool!
ｷﾀ━━━━(ﾟ∀ﾟ)━━━━!!
Stl?
But make it stronger and longer
Can i print with 3d?
yes
Sir I need you to do a how to make web fluid video from the spray bottle web shooter because I need this done by Friday November 15 2024 please it’s for a science project please and thank you
Now to make it super sticky
You must evolve
can you make me won please
Second here