2009 - 2014 Acura TL - Replacing Front Brake Pads - EASY DIY!

Sorry my audio was recording through one channel only on this and a few of my other recent videos. I just fixed the problem for all my future videos, but I can't change the audio on this upload.
amzn.to/3fmNbQX - Versachem 26080 Synthetic Caliper Grease
amzn.to/3SPlfmL - [2 Pack] Brake Caliper Hooks
amzn.to/3fgeY5N - 8-Pack of Rotor Screws
amzn.to/3k16GjY - Milwaukee M18 Fuel 3/8" Impact Wrench
amzn.to/3TP91f7 - VESSEL MEGADORA IMPACTA Impact Driven Screwdriver +3x150
amzn.to/2ZBs7u5 - GearWrench Torque Wrench used in video
amzn.to/2ZyyHl7 - Brake Cleaner
amzn.to/3T40p3b - Wire Wheels for drill
amzn.to/3sIqz0v - Milwaukee Safety Glasses
amzn.to/3QnVg68 - [Front] Wagner Brake QuickStop ZD1102 Ceramic Disc Brake Pad Set (not used in the video, but a good brand)
amzn.to/3CwTREt - [Front] Max Brakes Premium OE Rotors with Carbon Ceramic Pads KT027441 (if you need rotors as well, this is a good kit from a brand that I have used quite often)
Just a quick video showing how I replaced front brake pads on a 2010 Acura TL. This is the same for 2009-2014 models.
Tools Needed:
A couple Large flathead screwdrivers or small pry bars
17mm socket and/or wrench
Brake Grease
Torque specs I found online: 53 ft. lbs for the front caliper slide pin bolts. (I recommend checking that in your manual to make sure that's correct.)
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman
Song is 'We Cruisin' by Otis McDonald
As an Amazon Associate I earn from qualifying purchases.

[@MrSamPhoenix]

Love to see 4th-Gen Acura TL content

[@chuckwhite3033]

Did this today on my Acura. Your video was very helpful. I had done this on my old Honda Civic years ago, so I wasn't a complete rookie. Only difference was I waited until I removed the caliper to push the pistons back in (using the old pad and a c-clamp).

[@DantheFixitMan]

That's a great way to do it too!
Take care,
-Dan

[@kenton955]

Thank you so much this is extremely easy I never knew I could have done this without clips to keep the pressure down

[@dogasawa]

This is a great video! Thank you!

[@phonz14]

Thank you, most helpful bro

[@california7217]

Thank you for teaching

[@alkalinedefenderking2968]

I’ve been changing my brake for a while but learn something new

[@Chosen1510]

Just use a c clamp ppl

[@kbmalo_]

Like your video but those rotors are due