Ok had to come here from the giveaway post. I love that you don’t need a base to install the car seat!! It’s a great option for traveling with others and not having to take everything and transfer it to new car.
Would love demo of range of motion on the handle. I feel like it’s off balance and the grip is poor. I miss my car seat from first child 12 yrs ago. Also there are two size buttons that I don’t know what they do!
When only one end of the base is secured using seatbelts or latch connectors, the other end naturally (tries) lift(s) up. How do we secure the other end from trying to flip over??
Both LATCH connectors should be connected! If you are having installation issues we recommend going to a local fire station to have them do a car seat check!
I find this hard trying to i stall with the seatbelt. Ive redone this 10 times over and over and it always feels unsafe cause its moving too much. I prefer a carseat that wont budge not this and i brought this as soon as i found out i was pregnant so theres no luck in me exchanging this 🤦🏽♀️
I'm sorry it's a little tricky to install for you! If you need some help, the local fire department can always help get your seat installed for you. If you're interested, we can set up a video chat with one of our Certified Cubby Moms and they can help answer any questions about installation. Let us know if that is something that interests you!
@@TheBabyCubby yes please! ive been trying to find a tutorial that demonstrates a good way to ensure it wont move without isofix as i dont have that which sucks! after i seen the mico 30 max has the stand to help i wishi had seen that first as my first capsule i had 2 years ago had that but any tutorial that thoroughly shows a secured seatbelt fix is what i would love! so confusing to me
Hello, I find with my base the end away from the seat flips up towards the seat and doesn't stay securely down like the mico max with the rebound bar which keeps this from happening. How can I make sure this doesn't happen? I've attempted the leveling as well and still wants to flip up towards the seat.
Hello! Whenever we checked car seats we always check right where the seat belt route is. With car seats the end away from the actual seat will always move unless there is a load leg or something like it which is there just to add some extra stability. As long as you check right where the seat belt route is and it doesn't move more than an inch it's installed correctly!
If you are local, you can come to the store and have one of our CPS techs help you with your installation! Or you can go to a local fire station - fire stations have fire fighters who are CPS techs as well!
Unfortunately, it is not. The Nuna MIXX is only compatible with the Nuna PIPA car seat series. From the brands that we sell at babycubby.com , Maxi Cosi has stroller that are compatible with this car seat (with adaptors) along with Baby Jogger and UPPAbaby.
Do you need an insert to support the head of newborns in this car seat?
How do I get those travel adapter widgets out of the car seat so it can go back on the base in the car?
It snaps to any maxi cosi stroller?
Ok had to come here from the giveaway post. I love that you don’t need a base to install the car seat!! It’s a great option for traveling with others and not having to take everything and transfer it to new car.
Exactly! That's one of our favorite features about it!
What maxi cosí strollers is this compatible with and what adapters? I thought only the maxi coso taxi
Can a Maxi Cosi Mico 30 car seat fit in a Mico MAX 30?
Do you mean the the Max base?
Would love demo of range of motion on the handle. I feel like it’s off balance and the grip is poor. I miss my car seat from first child 12 yrs ago. Also there are two size buttons that I don’t know what they do!
DM us on instagram and we can help you out! ❤️
One of the most helpful videos out there!
Thank you! ❤️
Hi. Are the fabrics washable in machine?
Yes! With maxi Cosi they are also dryer sage
When only one end of the base is secured using seatbelts or latch connectors, the other end naturally (tries) lift(s) up. How do we secure the other end from trying to flip over??
Both LATCH connectors should be connected! If you are having installation issues we recommend going to a local fire station to have them do a car seat check!
This video was sooooo helpful!!! Thank you 😊
You're so welcome!
Is the materials on the car seat able to be washed?
Yes! Maxi Cosi is known for their washer AND dryer safe materials!
Hi, is this comparable with uppababy Cruz v2 stroller ? Thank you
Is this seat slim enough to fit 3 carseats across the back?
The mico has a width of 16.8” so we would recommend measuring your backseat to see it if could accommodate roughly 51” of car seats!
Can you do both the seatbelt and the other method at the same time to secure the seatbelt or do you just do one or the other
Hi there! You can technically use both if you prefer. We would recommend you use one method just to be safe!
I find this hard trying to i stall with the seatbelt. Ive redone this 10 times over and over and it always feels unsafe cause its moving too much. I prefer a carseat that wont budge not this and i brought this as soon as i found out i was pregnant so theres no luck in me exchanging this 🤦🏽♀️
I'm sorry it's a little tricky to install for you! If you need some help, the local fire department can always help get your seat installed for you. If you're interested, we can set up a video chat with one of our Certified Cubby Moms and they can help answer any questions about installation. Let us know if that is something that interests you!
@@TheBabyCubby yes please! ive been trying to find a tutorial that demonstrates a good way to ensure it wont move without isofix as i dont have that which sucks! after i seen the mico 30 max has the stand to help i wishi had seen that first as my first capsule i had 2 years ago had that but any tutorial that thoroughly shows a secured seatbelt fix is what i would love! so confusing to me
@@heyitsdaphh5983 Please fill out this google form so that we can schedule a video chat with you! www.babycubby.com/pages/video-chat
You have to bring the seat belt all the way out and let it ratchet back, then it locks it in place
Can this be a front-facing seat?
No, you should not face infant car seats forward.
Hi is this compatible with babyzen yoyo 2
Yes! There is an adaptor available for Maxi Cosi infant car seats.
Hello, I find with my base the end away from the seat flips up towards the seat and doesn't stay securely down like the mico max with the rebound bar which keeps this from happening. How can I make sure this doesn't happen? I've attempted the leveling as well and still wants to flip up towards the seat.
Hello! Whenever we checked car seats we always check right where the seat belt route is. With car seats the end away from the actual seat will always move unless there is a load leg or something like it which is there just to add some extra stability. As long as you check right where the seat belt route is and it doesn't move more than an inch it's installed correctly!
Is this car seat compatible with the Cybex Gazelle S?
Hello! The Micro 30 Infant Car seat is not compatible with the Cybex Gazelle S!
Is this compatible with the Stokke Xplory stroller if you have the attachments?
If you have the right adapter, the Maxi Cosi Mico 30 is compatible with the Xplory stroller!
Yes! That's my combo too 😍
Having such a hard time Installing the base , feels unsafe :(
If you are local, you can come to the store and have one of our CPS techs help you with your installation! Or you can go to a local fire station - fire stations have fire fighters who are CPS techs as well!
Thank you so much for this video!!!
Is this compatible for nuna mixx stroller?
Unfortunately, it is not. The Nuna MIXX is only compatible with the Nuna PIPA car seat series. From the brands that we sell at babycubby.com , Maxi Cosi has stroller that are compatible with this car seat (with adaptors) along with Baby Jogger and UPPAbaby.
Super helpful video. Thank you.
You're welcome!
I had this car seat for 9 months and just found out I can use it without the base 😅 #themoreyouknow
Love learning new things!
Removable cover, Yeah!!
Isn't that so nice! Such a great perk!
Is this compatible with the Maxi Cosi taxi stroller?
Yes, this car seat is compatible with all Maxi-Cosi strollers (except Lara) with included adapters!