Thank you for this. I went to my local Samsung store and they quoted $120 to do this for me! They were more interested in selling me a new one. Your instructions were great and it gave me the confidence to give it a try. It works and hopefully I'll get another couple of years out of this watch.
I used this as a guide for changing the battery on my own troublesome S3. Only thing missing was a reminder on how to remove the bands. I ended up having to order a Y-driver from Joes, as suggested by this video, rather than the one with my battery kit. I used a very small PC repair screwdriver (flathead) on the inner screws, though they appear to be very narrow phillips type screws. A bright light is recommended when working on all this.
Thanks so much …….so helpful ....... I do recommend to turn-on the watch before closing the back cover to be sure that it is working with the new battery
Thanks Joe. I could not have changed the battery without your video. It was extremely helpful. I had some challenges getting the screws off even though I had the right tools. It appears that Samsung had tightened the screw too tightly. With persistence they come off. Many thanks. Hopefully the battery will last another three years. I give you 5 stars. Sam
Very nice video. The instructions that came with my battery were crap. I'm not sure I would have been able to replace it without this video. Great job!!
Just done a gear sport its construction is similar to the s3 froniter but it uses a plastic white holder the motherboard is attached to this. it's not just adhesive to the board itself like the froniter you need to careful lift it the motherboard off the holder to reveal the battery connector (be gentle the motherboard, sensor & GPS ribbon cables are attached to the battery holder once the connector is released carefully pop a spludger under it and it will come out. That's it then just reverse the process to put it back together.
Hi Joe, what tool did you use to pry open the back cover. I unscrewed the screws but can't find anything that tiny to get it in between edges to pry back open. Hope you can share that info...otherwise, really a nice tutorial.
Thanks for the comment. The Pry tool used in the video was a thin Flathead screwdriver you just have to be very careful not to scratch the back housing if you would like you can use a normal thin pick. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form: www.joesge.com/pages/repair-services Russ C.
Thank you for the comment. We do ship worldwide. You can simply go to our website (www.JoesGE.com) and add the part or product to your shopping cart. Then you can start the process of checking out. During this step you will add your shipping address. After that is completed you will see a shipping cost based off your location. That will be the cost of the shipping to your country. -David P
Thanks for this video. I have hit a snag. All went according to plan until, just as I was able to re-assemble the watch, the "permanent" ribbon that held the board onto the watch snapped off. The ribbon looks as though it has 4 contacts and didn't appear to be soldered. It seems to me that it might have been attached using some adhesive, but I can't be sure. My first thought was, "after all of this, I will have to send it to Samsung and let them re-attach that ribbon and re-assemble the watch for me" -- which I may have to do, but I thought I'd ask you: Is it possible to re-attached this ribbon CORRECTLY and put this board back in place???? If I can do that, it will take me 2 minutes to complete this project! Thoughts?
Thanks for the comment. The four piece ribbon, once it's broke there is no way of repairing the issue, unless you replace the whole main board. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form: www.joesge.com/pages/repair-services Russ C.
Hello Darren, we do not sell the Samsung Gear S3 back housing on our website yet. We also do not have screws to sell as well. We suggest you reach out to us at Support@JoesGE.com in the next couple of weeks. Ruslan P
Thanks for the comment. No you do not lose water proofing you just have to use B-7000 for the glue to make the unit water resistant/water proof. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form: www.joesge.com/pages/repair-services Russ C.
To be realistic we repair watches and we receive water damaged watches all the time. Saying all that, the glue we use does help with waterproofing but as of now nothing is truly waterproof
Just to add a quick note--the back of the case must be installed (but not screwed down) in order for the watch to charge. It cannot be tested, unless this is done.
Helpful but please slow down on some of those ribbon cables like the last one before you get to the battery your finger is basically blocking the whole thing
Thank you! I followed the instructions, but I did have a problem! when I turned the watch back on I could only see a stripe for a fiew seconds on the screen... and then the screen is off I was super carefully and did everything exacly as you showed did I messed something up? the watch connects to the phone... great battery life now, but no screen.... lol I am from Brazil and the places you can take to fix they will rip you off Any ideas??? Again, thanks a lot
I have the exact same problem. Worked fine other than the short battery life. I followed the instructions very carefully, and now when trying to charge a green line appears circling the outside of the top 1/4 of the screen that also goes across the middle. It does this for a short time until the charger light goes from solid red to blinking red.
@@michaelamos75 I have the same issue I think it's the replacement battery. I put my old bloated battery back in and it came on and started charging saying 94% which is incorrect. So I am ordering another replacement battery
@@dondagun I put the old battery in and it worked fine minus the short battery life. The replacement battery I was sent did the same thing. I'm ordering another battery from another manufacturer.
Great video. I followed all instructions now the vibrate does not work. I took apart the watch 3 times to make sure all cables were connected. Still won't vibrate. Any suggestions?
Thanks for the comment. Make sure there are no damaged ribbon cables as this will affect the functionality of the device. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form: www.joesge.com/pages/repair-services -David P
Thanks for the comment. Yes they are same battery, with both the same dimensions. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form: www.joesge.com/pages/repair-services Russ C
my screw was stripped while i was trying to take it out. I tried using rubber band, screw driver is sharp and it just cut through it. How would you recommend on taking it out? Thanks
Thanks for watching Naylin. You can try using a small flat edge screwdriver to remove the screw, or you can unscrew the other 3 screws and try to spins the plastic housing to loosen the screw. If you need to, you can break the plastic housing on the back. We sell the housings for the watching and it is easy to replace. MD.
That back cover doesn't come off like that, why not use a watch that hasn't been pried open several times or at least take a second to help someone do this without ruining the backplate. Because it's not that easy.
Hey, I bought a used gear S3 frontier from a friend, I only get 6-10 hours from the watch, if I put in a new battery then how much better will the battery life be?
I have a gear sport, the watch overheats as soon as i put it on the charger. Is it likely this is a battery issue? If so is it the same procedurd as S3? Thanks
Thanks for watching! This very likely is a battery issue. And there a a few different models of the Samsung Gear watches. We do offer repair services here if you would like it fixed: JoesGE.com/pages/repair-services
The watch is still water resistant as long as you do not keep it in the water for more than 30 minutes and also dont take it under 1.5 meters or more. Ruslan P
If you use the right tools, no integrity should be lost :) We are a professional service and suggest you reach out to Samsung in regards to there repair process. Ruslan P
Thanks for the comment. The issue you are describing sounds like you might need to use a small thin flat head in order to pull that screw out but gently apply pressure because the housing could get damaged. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form: www.joesge.com/pages/repair-services Russ C.
Hi I replaced my battery today and it charges fine in the wireless charger. The display lights up while in the charger giving me the current charge State percentage. But the unit will not power on when I push the button. Any ideas?
I'm facing the exact same issue, the watch won't turn on after battery replacement (neither with the old one) but it charges. The top button works when it's chargin but not the power one, did you find a solution ?
Rather than try to fix my Gear S3, I bought a brand new one. The old one had battery drain, stopped reading my heartbeat, and stopped counting my steps. It's been almost THREE MONTHS exactly and today the battery didn't even last ten hours. I give up.
Well even after following what you did mine isn't turning on. This video didn't help at all. Not worth watching when you can't see what he's doing. Now I have to go out and but a new one.
Hello, thanks for commenting. Please email us at support@joesge.com with a screenshot of your question and we will be able to better assist you there. - Aaron P
Thanks for watching! If you have ripped off the ribbon cable, it cannot be reattached. Did you purchase a replacement battery and rip the cable off of the replacement? Or were you just opening the watch, and ripped the cable off of the original? MD.
Thank you for this. I went to my local Samsung store and they quoted $120 to do this for me! They were more interested in selling me a new one. Your instructions were great and it gave me the confidence to give it a try. It works and hopefully I'll get another couple of years out of this watch.
Glad we can help:) Please like, subscribe and share the video.
Hey thank you so much for taking the time to explain in detail how to replace the battery. You were a lot more helpful then the directions sent
I used this as a guide for changing the battery on my own troublesome S3. Only thing missing was a reminder on how to remove the bands. I ended up having to order a Y-driver from Joes, as suggested by this video, rather than the one with my battery kit. I used a very small PC repair screwdriver (flathead) on the inner screws, though they appear to be very narrow phillips type screws. A bright light is recommended when working on all this.
Thanks so much …….so helpful ....... I do recommend to turn-on the watch before closing the back cover to be sure that it is working with the new battery
Great tip!
Thank you so freaking much months of agony finally gone😭
Thanks for watching! We are glad this could help you!
I appreciate your time making this video. Thank you!
Glad we can help:) Please like, subscribe and share the video.
Omg thank you so much. Did this my self and used the HDCKU replacement kit for this watch and I am so happy and I did it myself
Thanks Joe. I could not have changed the battery without your video. It was extremely helpful. I had some challenges getting the screws off even though I had the right tools. It appears that Samsung had tightened the screw too tightly. With persistence they come off. Many thanks. Hopefully the battery will last another three years. I give you 5 stars.
Sam
Glad we could be of help to you:)
Thank you, this video helped save me having to get a new watch.
Thanks for watching! That is why we make these videos, we are glad it could help.
Great upload 👍 thanks
I wonder if they do a higher battery level replacement??
You know,a battery with larger ampage... great work bud👌
Superb video, got it right the first try , saved me a ton of money😁😁
Glad we can help:) Please like, subscribe and share the video.
Thanks. Your procedure worked great. I appreciate the help.
Still a great tutorial... Thankyou from UK....
Thank you for watching our video Frank, we appreciate the love :)
Ruslan P
Very nice video. The instructions that came with my battery were crap. I'm not sure I would have been able to replace it without this video. Great job!!
Glad I could help
Thank you, new life for this great watch!
Thanks for watching! We are glad your watch is working again!
Does it effect water resistance
And how long is it to know that the battery must be replaced
Just done a gear sport its construction is similar to the s3 froniter but it uses a plastic white holder the motherboard is attached to this.
it's not just adhesive to the board itself like the froniter you need to careful lift it the motherboard off the holder to reveal the battery connector (be gentle the motherboard, sensor & GPS ribbon cables are attached to the battery holder once the connector is released carefully pop a spludger under it and it will come out. That's it then just reverse the process to put it back together.
Thank you mate that made my life so much easier!!!
Muchas gracias, tu video me ayudó mucho
¡De nada! Estamos felices de que te haya ayudado :) Matt D.
Nickel merci pour le tuto
After doing this is it still water resistant?
Thanks and have a good day
will the watch still retain all memeory items when you disconnect the batterey?? Thank you great videos Don K
Thanks for the comment. Yes, the memory will remain on the device.
-David P
Hi Joe, what tool did you use to pry open the back cover. I unscrewed the screws but can't find anything that tiny to get it in between edges to pry back open. Hope you can share that info...otherwise, really a nice tutorial.
Thanks for the comment. The Pry tool used in the video was a thin Flathead screwdriver you just have to be very careful not to scratch the back housing if you would like you can use a normal thin pick. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form:
www.joesge.com/pages/repair-services
Russ C.
Hello, Joe. Can you ship one of these to Brazil? Thank you.
Thank you for the comment. We do ship worldwide. You can simply go to our website (www.JoesGE.com) and add the part or product to your shopping cart. Then you can start the process of checking out. During this step you will add your shipping address. After that is completed you will see a shipping cost based off your location. That will be the cost of the shipping to your country.
-David P
Thanks for this video. I have hit a snag. All went according to plan until, just as I was able to re-assemble the watch, the "permanent" ribbon that held the board onto the watch snapped off. The ribbon looks as though it has 4 contacts and didn't appear to be soldered. It seems to me that it might have been attached using some adhesive, but I can't be sure. My first thought was, "after all of this, I will have to send it to Samsung and let them re-attach that ribbon and re-assemble the watch for me" -- which I may have to do, but I thought I'd ask you: Is it possible to re-attached this ribbon CORRECTLY and put this board back in place???? If I can do that, it will take me 2 minutes to complete this project! Thoughts?
Thanks for the comment. The four piece ribbon, once it's broke there is no way of repairing the issue, unless you replace the whole main board. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form:
www.joesge.com/pages/repair-services
Russ C.
i dont see the back cover on your site, do you sell those with screws, mine stripped
Hello Darren, we do not sell the Samsung Gear S3 back housing on our website yet. We also do not have screws to sell as well. We suggest you reach out to us at Support@JoesGE.com in the next couple of weeks.
Ruslan P
do you lose waterproofing by doing this?
Thanks for the comment. No you do not lose water proofing you just have to use B-7000 for the glue to make the unit water resistant/water proof. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form:
www.joesge.com/pages/repair-services
Russ C.
What about waterproofing, doesn't this ruin the seal?
To be realistic we repair watches and we receive water damaged watches all the time. Saying all that, the glue we use does help with waterproofing but as of now nothing is truly waterproof
hi, can you know what kind of screwdriver to use and how many mm ??
Thanks for the comment. The screwdriver is Y 1.5mm
-David P
Just to add a quick note--the back of the case must be installed (but not screwed down) in order for the watch to charge. It cannot be tested, unless this is done.
Good point. You’ll need the back cover to conduct the wireless charging coil.
When replacing the battery is it still water resistant, I've heard once you open it. It is no longer water resistant
Thanks for the comment. Yes, the watch will be water-resistant as long as you use water-resistant adhesive.
-David P
@@Joesge you use the adhesive (B-7000) to seal the back cover? Do you have a video or pictures of that step? Thanks for your great videos btw
Helpful but please slow down on some of those ribbon cables like the last one before you get to the battery your finger is basically blocking the whole thing
Thank you!
I followed the instructions, but I did have a problem!
when I turned the watch back on I could only see a stripe for a fiew seconds on the screen... and then the screen is off
I was super carefully and did everything exacly as you showed
did I messed something up?
the watch connects to the phone... great battery life now, but no screen.... lol
I am from Brazil and the places you can take to fix they will rip you off
Any ideas???
Again, thanks a lot
You can always send it in to us to repair! We do ship to Brazil, you can find the repair form here: JoesGE.com/pages/repair-services
I have the exact same problem. Worked fine other than the short battery life. I followed the instructions very carefully, and now when trying to charge a green line appears circling the outside of the top 1/4 of the screen that also goes across the middle.
It does this for a short time until the charger light goes from solid red to blinking red.
@@michaelamos75 I have the same issue I think it's the replacement battery. I put my old bloated battery back in and it came on and started charging saying 94% which is incorrect. So I am ordering another replacement battery
@@dondagun I put the old battery in and it worked fine minus the short battery life. The replacement battery I was sent did the same thing. I'm ordering another battery from another manufacturer.
@@michaelamos75 ok, let's hope that the replacements work. I even scraped the terminals to ensure a good connection but still nothing.
Great video. I followed all instructions now the vibrate does not work. I took apart the watch 3 times to make sure all cables were connected. Still won't vibrate. Any suggestions?
Thanks for the comment. Make sure there are no damaged ribbon cables as this will affect the functionality of the device.
If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form:
www.joesge.com/pages/repair-services
-David P
The screws are triangle shaped not the the typical philips. Do you know where to get that special screw driver?
This is the screwdriver you will need - www.joesge.com/products/samsung-gear-s2-s3-smartwatch-screwdriver-repair-y-2-0mm-tool
You didnt turn it on to make sure it works?
Where did you get the battery?
Hello and thank you for reaching out to us. You can go to our website JoesGE.com and purchase a battery from our store.
JP
Joe's Gaming & Electronics I just searched for Samsung Galaxy Gear S3 Battery and nothing came up
You check our eBay store www.ebay.com/itm/323226137096
JP
Can we replace gear s3 frontier’s battery (SM-R765) in the classic (SM-R770)? Are they of the same dimension?
Thanks for the comment. Yes they are same battery, with both the same dimensions. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form:
www.joesge.com/pages/repair-services
Russ C
Am also curious to know
I tried to replace it on my own and it fit perfectly. Thanks a lot.
my screw was stripped while i was trying to take it out. I tried using rubber band, screw driver is sharp and it just cut through it. How would you recommend on taking it out? Thanks
Thanks for watching Naylin. You can try using a small flat edge screwdriver to remove the screw, or you can unscrew the other 3 screws and try to spins the plastic housing to loosen the screw. If you need to, you can break the plastic housing on the back. We sell the housings for the watching and it is easy to replace. MD.
That back cover doesn't come off like that, why not use a watch that hasn't been pried open several times or at least take a second to help someone do this without ruining the backplate. Because it's not that easy.
Hey, I bought a used gear S3 frontier from a friend, I only get 6-10 hours from the watch, if I put in a new battery then how much better will the battery life be?
It is uncertain what the watch battery life will be. Its all based off usage.
@@Joesge It'll take at least three days just to see the time. Why would you change the batteries? :)
Hi, do you know if this is the same battery for Samsung Galaxy Watch 46 mm Bluetooth?
Thanks for the comment. What is the model number of your watch?
-David P
SM-R800
Thanks, the battery is not the same as the Samsung Gear S3.
I have a gear sport, the watch overheats as soon as i put it on the charger. Is it likely this is a battery issue? If so is it the same procedurd as S3? Thanks
Thanks for watching! This very likely is a battery issue. And there a a few different models of the Samsung Gear watches. We do offer repair services here if you would like it fixed: JoesGE.com/pages/repair-services
Is it still water resistant after replacing battery yourself?
The watch is still water resistant as long as you do not keep it in the water for more than 30 minutes and also dont take it under 1.5 meters or more.
Ruslan P
@@Joesge So no integrity has been lost by opening it myself? A professional or Samsung service would not do it any differently?
If you use the right tools, no integrity should be lost :) We are a professional service and suggest you reach out to Samsung in regards to there repair process.
Ruslan P
Do you know if Samsung Gear 2 classic has a replaceable battery
It does have a replaceable battery. you may have to search amazon or eBay for one as we do not sell them at the moment.
my screws stripped during the process, i could only get one out while the other 3 are stuck. Any suggestions?
Thanks for the comment. The issue you are describing sounds like you might need to use a small thin flat head in order to pull that screw out but gently apply pressure because the housing could get damaged. If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form:
www.joesge.com/pages/repair-services
Russ C.
@@Joesge Thank you very much i appreciate it
Hi I replaced my battery today and it charges fine in the wireless charger. The display lights up while in the charger giving me the current charge State percentage. But the unit will not power on when I push the button. Any ideas?
This could be a power board issue. We can take a look at it if you would like, our repair form is located here: JoesGE.com/pages/repair-services
i have the exact same issue
its like the buttons arent working or something
I'm facing the exact same issue, the watch won't turn on after battery replacement (neither with the old one) but it charges. The top button works when it's chargin but not the power one, did you find a solution ?
@@amine.n1319 did u find any solution?
Rather than try to fix my Gear S3, I bought a brand new one. The old one had battery drain, stopped reading my heartbeat, and stopped counting my steps.
It's been almost THREE MONTHS exactly and today the battery didn't even last ten hours. I give up.
I could know the size of the tri-wing screwdriver
Thanks for the comment. The size is Y2.0.
-David P
Will this mess up water resisting?
Thanks for watching! If you follow the steps in this video, the water resistance will not be compromised. MD.
I replaced the battery but my home button stop working has anyone had. This issue?
Thanks for the comment. Check the ribbon cables for any loose connections or torn ribbons.
-David P
Well even after following what you did mine isn't turning on. This video didn't help at all. Not worth watching when you can't see what he's doing. Now I have to go out and but a new one.
Hello, thanks for commenting. Please email us at support@joesge.com with a screenshot of your question and we will be able to better assist you there. - Aaron P
My battery didn't pry off that easy and it ripped the ribbon out with it , how can you attach the ribbon back on?
Thanks for watching! If you have ripped off the ribbon cable, it cannot be reattached. Did you purchase a replacement battery and rip the cable off of the replacement? Or were you just opening the watch, and ripped the cable off of the original? MD.
@@Joesge oh i was replacing the battery i think it got puffed it because it was old and it ripped it off the t the same time as the battery
If you need it fixed, you can follow the steps on our website here: JoesGE.com/pages/repair-services.
I did it perfect now it doesnt power in wtf
Thanks for the comment. Check for unplugged or torn ribbon cables as this can affect the functionality of the watch.
-David P
My battery goes from 100 percent to 0 in 3 hours
Hello, thanks for commenting. Please email us at support@joesge.com and we will be able to better help you there. - Aaron P