All soft wheels are prone to chunking. Especially if you're kicking your board around trying to do tricks with them. OJ Wheels are considered some of the best wheels. They're better than what I ride. But I ride 99a.
Im skating a pair Ive had for 6 year’s-mostly cruiser wear but Ive always skated tricks on em and honestly was blown out of the water-looking into getting a harder set for a new set up though
If you use your tricks that doesn't support your soft wheels that will happened so instead use STF formula wheels is better than mostly the soft wheels is good and better for cruising around all time...
these are cruiser wheels. they are the best cruiser wheels on the market, so if you have problems with these you are going to have problems with all of them.
@@macadosheesh i don't know how you skate, but all cruiser wheels are soft. they will eventually chip or flat. I have had these for a few months and no issues. they are the best cruisers I have used so far.
Haha nothing last forever, my OJs are chipped worse and they still work fine i had them a few years and ordered another set i just wouldn’t agree that theyre “garabge”
@macadosheesh lmao that's rich coming from you, hippie jumps and tiny ass hill bombs. I've got rods and screws in my spine and I could skate better than you 6 month after a spinal operation 😂😂
Soft wheels chunk. It is what it is. Doesn't matter what company, it happens. Doesn't mean they're garbage. Super Juice are really soft. You should have tried some 87a Plain Janes.
All soft wheels chunk like that. Especially if you have them on a deck you're doing ollie's on and stuff. Not to mention if they were 55s they have been well used based on the size they are now. I'd say you got your money's worth.
Try a slightly harder duro. Soft wheels just chunk like that. Anything under 80a will chunk like that. It happens. OJ wheels are good wheels though. Try their Key Frames. They are softer but not so soft they will chunk. With roads like that tho I'd look for some 80a to 85a wheels. Even the key frames may be too hard for that shit. 😬
Their just getting good! Ride em till they fall off! Oj super juice are the best cruiser wheels on the market! I’ve had my 60mm ones going for about 2+ years now an don’t plan on changing them anytime soon! They definitely have a couple chunks but that’s bound to happen with any soft wheel! Rip ride 🤙🏽🍻
@@wizfly yeah I have a 1/4 riser on there just so I have a bit more turning room since it is my cruiser board! But the wheels are like 53mm now so I probably don’t need it on there anymore but what the heck I just kept it on haha
I got the spitfire ones and got the same results, they all chipped and broke, but they still going.. I just don’t have to look at them cause it bothers me so much to see them all chipped, altho I use my cruiser as a normal board I didn’t expect them to break like this, I thought it was from grinding, pinching, but it’s also doing tricks ( or trying haha) I guess
That's what happens when you skate one set up for months at a time lol but I hope you can make some wheels better than a company that's been making wheels since 1977
What did you hit that caused that? Those look like the OG mini super juice wheels that are normally pretty sturdy. Did you contact NHS? they might send you a new set.
Idk maybe ollie’d onto a jagged pebble? I sent the claim but they wanted it sent in for analysis and wouldn’t cover shipping so I tossed em in the trash
It's part of riding a soft wheel, all those bumps you don't feel with soft wheels don't magically disappear. They are absorbed by the wheel and they are going to chunk off pieces, it's just one of those pay to play scenarios and I know spending money isn't fun but to ride with comfort then it cost money. I ride my ojs two miles each day and they last me close to a year so 45bucks for a years worth of fun I feel is worth it and my old wheels are still in better shape then the ones shown. Cleaning the bearings would make you go faster and your ride will be smoother. Your wheels aren't spinning fast enough so they will be more effected by the rocks in the road.
Naaa you need the right Duro for what you want. You can't be power sliding on soft wheels man. Flat spot central. Also wheels naturally lose shape but when you get soft wheels and bomb hills and skate the street instead of a park then you'll get this. Anyway, works man never blames his tools. Only a bad worker
+1 for OJs being garbage. I have a set of From Concentrate 101A that I have on my EggZilla 2. Literally, first session I came out of a boardslide sideways and slid out maybe 3ft, at a skatepark smooth surface. Threw my board down the next try, CLACK CLACK CLACK CLACK CLACK. Never had a flat spot happen without putting a lot of effort into it.
You know pro models are the same as every other deck, wheel or truck right? You can get a standard set of Independents, slap a name on it and you have to pay 20 bucks more.
All soft wheels are prone to chunking. Especially if you're kicking your board around trying to do tricks with them. OJ Wheels are considered some of the best wheels. They're better than what I ride. But I ride 99a.
Im skating a pair Ive had for 6 year’s-mostly cruiser wear but Ive always skated tricks on em and honestly was blown out of the water-looking into getting a harder set for a new set up though
oj sucks 😂
If you use your tricks that doesn't support your soft wheels that will happened so instead use STF formula wheels is better than mostly the soft wheels is good and better for cruising around all time...
I've been riding 96a wheels for years and never even experienced a crack
@@Coastal_Cruzer thats because they are hard wheels not like cruiser wheels
these are cruiser wheels. they are the best cruiser wheels on the market, so if you have problems with these you are going to have problems with all of them.
Shitty, they were nice until this..
@@macadosheesh i don't know how you skate, but all cruiser wheels are soft. they will eventually chip or flat. I have had these for a few months and no issues. they are the best cruisers I have used so far.
@@ezrhino100 this was from ollieing flatground
@@macadosheeshwhy would u ollie or do tricks on cruiser wheels
For curbs mainly on the boulevard while still maintaining a decent speed with shit New England pavement conditions.
You def need new bearings or at least to clean and lube those…they have no spin and that has nothing to do with the wheels
Already replaced them and the wheel would have still shattered..
I think you missed how half of the wheel was gone, the spin had nothing to do with it.
@skatingwithboards shouldn’t split from a pebble tho just cruising.
@skatingwithboards it’s worse in New England
Flat ground Ollie’s shouldn’t shatter a wheel in like a month and I was cruising when it split..
Haha nothing last forever, my OJs are chipped worse and they still work fine i had them a few years and ordered another set i just wouldn’t agree that theyre “garabge”
Glad to hear but they legit are in the dumpster long gone
Still rideable. Someone at my park has 4 different wheels and no bushings. Destroys everything
When you don’t know how to take care of gear
Maybe I should start skating as soft as you then..
😂 nice try. There’s a reason why I have more subs 💯. I can actually skate
No one cares about your skating, just your music somewhat.. get at me when you have a bigger banger than a three set..
@macadosheesh lmao that's rich coming from you, hippie jumps and tiny ass hill bombs. I've got rods and screws in my spine and I could skate better than you 6 month after a spinal operation 😂😂
Congrats? Total accident tho.
Soft wheels chunk. It is what it is. Doesn't matter what company, it happens. Doesn't mean they're garbage. Super Juice are really soft. You should have tried some 87a Plain Janes.
It does tho when ya throw ‘em out
All soft wheels chunk like that. Especially if you have them on a deck you're doing ollie's on and stuff. Not to mention if they were 55s they have been well used based on the size they are now. I'd say you got your money's worth.
And now they’re recycled
I got some OJ Keyframes - I like mine. They drift soooo predictably at speed.
I think less than 80A softness is worse I got Bones Rough Riders ATF stilll not wearing off for like three weeks still on good shape too...
Good to know, thanks
Those Rough Riders and the comparable Powell G Slides are exceptionally good wheels.
I haven’t skated a cruiser wheel that DOESN’T do this, regardless of brand.
Try a slightly harder duro. Soft wheels just chunk like that. Anything under 80a will chunk like that. It happens. OJ wheels are good wheels though. Try their Key Frames. They are softer but not so soft they will chunk. With roads like that tho I'd look for some 80a to 85a wheels. Even the key frames may be too hard for that shit. 😬
Their just getting good! Ride em till they fall off! Oj super juice are the best cruiser wheels on the market! I’ve had my 60mm ones going for about 2+ years now an don’t plan on changing them anytime soon! They definitely have a couple chunks but that’s bound to happen with any soft wheel! Rip ride 🤙🏽🍻
do you need a riser
@@wizfly yeah I have a 1/4 riser on there just so I have a bit more turning room since it is my cruiser board! But the wheels are like 53mm now so I probably don’t need it on there anymore but what the heck I just kept it on haha
@@SlashDiaries alright thanks!
My 55mms did the same thing, but ive had the 60mm ones for almost 3 years now and theyve never done that
Soft wheels will totally chuck or crack like that with alot of use and those look used. Plus he probably did some extreme impact
Nah ‘I’ did not, just flatground and curb ollies
Try new bearings my oj wheels worked perfectly fine for 5 years w a hardness of 87a
Def need them by now
Looks like they are sun rotted and old as hell haha
Like 2 months old. You must be talking about the deck.
I got the spitfire ones and got the same results, they all chipped and broke, but they still going.. I just don’t have to look at them cause it bothers me so much to see them all chipped, altho I use my cruiser as a normal board I didn’t expect them to break like this, I thought it was from grinding, pinching, but it’s also doing tricks ( or trying haha) I guess
Craziness. Used to happen to my shitty scooters using the brake as a kid.
U need some new bearings bro
I need to open the caps and clean the insides
I just bought som OJ team rider reissues. They are 🔥!!!
Sponsored by Spitfire
try harder ojs they wont chunk i have pair of soft ones that chunked but i was doing power slides
That's what happens when you skate one set up for months at a time lol but I hope you can make some wheels better than a company that's been making wheels since 1977
It’s not the wheels bro it’s the bearings
That reminds me I need to grab some wd-40, thanks.
@@macadosheesh no don’t use wd 40 use 3 in one oil or bones speed cream
So is ur setup
Ballin on a budget. What’s your excuse?
What did you hit that caused that? Those look like the OG mini super juice wheels that are normally pretty sturdy. Did you contact NHS? they might send you a new set.
Idk maybe ollie’d onto a jagged pebble? I sent the claim but they wanted it sent in for analysis and wouldn’t cover shipping so I tossed em in the trash
@@macadosheesh good riddance
87 is way stronger than 78...78 dies quite fast
hahaha its cruiser wheels mate. so nahh they are perfect for that, just not for tricks as in at all.
Same happened to mine. Two different sets
Jeez. Gonna have to be strictly for the boardwalk if ever those again and then who knows.
It's part of riding a soft wheel, all those bumps you don't feel with soft wheels don't magically disappear. They are absorbed by the wheel and they are going to chunk off pieces, it's just one of those pay to play scenarios and I know spending money isn't fun but to ride with comfort then it cost money. I ride my ojs two miles each day and they last me close to a year so 45bucks for a years worth of fun I feel is worth it and my old wheels are still in better shape then the ones shown. Cleaning the bearings would make you go faster and your ride will be smoother. Your wheels aren't spinning fast enough so they will be more effected by the rocks in the road.
Get harder wheels 101a
Still shouldn’t have chunked
Well what are skating? That ground looks sharp
Frost heaves everywhere basically
Naaa you need the right Duro for what you want. You can't be power sliding on soft wheels man. Flat spot central. Also wheels naturally lose shape but when you get soft wheels and bomb hills and skate the street instead of a park then you'll get this. Anyway, works man never blames his tools. Only a bad worker
+1 for OJs being garbage. I have a set of From Concentrate 101A that I have on my EggZilla 2. Literally, first session I came out of a boardslide sideways and slid out maybe 3ft, at a skatepark smooth surface. Threw my board down the next try, CLACK CLACK CLACK CLACK CLACK. Never had a flat spot happen without putting a lot of effort into it.
Oof.. flatground ollies here.
Maybe cuz their soft wheels
oh no 😅 how long did they last?
Couple months of ollie on curbs, shuv-its and crusing
Need new
Get pro wheels pro berrings pro deck pro trucks whole 9 yards
You know pro models are the same as every other deck, wheel or truck right? You can get a standard set of Independents, slap a name on it and you have to pay 20 bucks more.
Those are cheap bootlegs. You got ripped off.
You had me in the first half.. not gonna lie
So are you
Real recognize real yo. Jk hmu when you get 32k on your dumbest video to date. Btw I threw em away, dipshit.
same shit happened to mine
😂