Gracias por tu video es de gran ayuda para mi , tengo un ańo cambiando vidrios y justo hoy me preguntaron de una ram q liquea agua , voy a seguir este consejo de nuevo muchas gracias ,
Hi first off I’d like to say thank u for making these videos, they really r helpful, I’m a rookie AutoGlass installer & id like to ask if u have or can u make video on hand setting & exactly where u position the cups & why? I’m not big guy & I feel like we have similar builds & id like to know more about your hand setting technique before I try it on a customers car
Andrew Liscinski I’m happy to share what I have learned. Thank you for taking the time to watch my videos, in regards of the setting check out my video of the subaru, in that video I explain my technique on hand setting.
Those are fun out in the middle of a parking lot somewhere when it's about a 100 degrees in the shade and a van full of installs left to finish the day out.
Hello Do you have any videos or tips for replacement on a 350/370z for side moldings and rubber gasket Also what about saving moldings like the ones on a lexus gx460 I saw your video on tsx Is that the only way to save those moldings and does the line go under glass fine and not catch molding?
@@AlfredosAutoGlassRepairCorona awesome man I'll be on the lookout I love all your videos they help out alot I seen your videos for saving tsx moldings and lexus gx molding How hard is it to get the line under molding and glass and pull glass out after cut?
Manuel Lopez not to difficult to get the fiber line under the molding same thing to pull the glass out not that difficult. Just have to pull towards you then off to the side. Once you do it one time you’ll get the feeling.
hey alfredo nice job on saving that backglass,always very profecional on what you do,and this is why i look for your videos everytime i need to work on a car my self,keep up the good work...question are you a christian ?i ask beacuse in your videos most of them you end it by saying God bless...i am a christian my self
@@AlfredosAutoGlassRepairCorona amén praise God, may the Lord keep in all hes ways. I respect all your work and i can tell you do your work to bring praise to hes name...
I love the Belron Ezi wire on most things. The only drawback I've found is it's twice as big or more than the ones you're talking about. But I have made it work on these B/G
U removed the window bcs u thought it was leaking from the back window....😂 but it wasnt .... ram pick up always leaks water from the third brake light ..comun problem with those trucks
Alfredo is a God send
Jesse Magana thankful you enjoy my videos!
You the man!
Gracias por tu video es de gran ayuda para mi , tengo un ańo cambiando vidrios y justo hoy me preguntaron de una ram q liquea agua , voy a seguir este consejo de nuevo muchas gracias ,
Hi first off I’d like to say thank u for making these videos, they really r helpful, I’m a rookie AutoGlass installer & id like to ask if u have or can u make video on hand setting & exactly where u position the cups & why? I’m not big guy & I feel like we have similar builds & id like to know more about your hand setting technique before I try it on a customers car
Andrew Liscinski I’m happy to share what I have learned. Thank you for taking the time to watch my videos, in regards of the setting check out my video of the subaru, in that video I explain my technique on hand setting.
nice alfredo those are hard to remove excelent
VIDRIOKAR thank you! Yes this ones are not the easiest to save and time consuming.
@@AlfredosAutoGlassRepairCorona ufff i know especial all sits removed time time
Those are fun out in the middle of a parking lot somewhere when it's about a 100 degrees in the shade and a van full of installs left to finish the day out.
At 16:05 I would’ve just piped nifed it and be like fuck that
What vehicles enterchange witb 21 dodge ram 1500 back windows
Hello
Do you have any videos or tips for replacement on a 350/370z for side moldings and rubber gasket
Also what about saving moldings like the ones on a lexus gx460
I saw your video on tsx
Is that the only way to save those moldings and does the line go under glass fine and not catch molding?
Manuel Lopez I don’t but next time I have one I’ll record a video.
@@AlfredosAutoGlassRepairCorona awesome man I'll be on the lookout I love all your videos they help out alot I seen your videos for saving tsx moldings and lexus gx molding
How hard is it to get the line under molding and glass and pull glass out after cut?
Manuel Lopez not to difficult to get the fiber line under the molding same thing to pull the glass out not that difficult. Just have to pull towards you then off to the side. Once you do it one time you’ll get the feeling.
hey alfredo nice job on saving that backglass,always very profecional on what you do,and this is why i look for your videos everytime i need to work on a car my self,keep up the good work...question are you a christian ?i ask beacuse in your videos most of them you end it by saying God bless...i am a christian my self
Família Salazar SANA DOCTRINA thank you. Yes I’m Christian I gave my life to the Lord and I do my work as if I was doing it to him.
@@AlfredosAutoGlassRepairCorona amén praise God, may the Lord keep in all hes ways. I respect all your work and i can tell you do your work to bring praise to hes name...
Família Salazar SANA DOCTRINA the glory to Him brother!
Is there anything u don’t like about the orange bat? I have the original spider and it leaves a lot to be desired.
Anthony Tiedt they both have their place in my tool box. I do use the Spyder 3 more often than the Orange 🦇 though.
I love the Belron Ezi wire on most things. The only drawback I've found is it's twice as big or more than the ones you're talking about. But I have made it work on these B/G
Alfredo I need your expertise which Kit do you recommend for chip repair
Samer Attallah I personally use Glasweld zoom and I’m very happy with the results I’m able to accomplish.
Alfredo's Auto Glass Repair Corona thank you so much for the reply back I was looking in to delta kits
Samer Attallah Delta kits are great too.
Great job man, these are a bugger, have you ever seen one removed electrically ? Great for junkyards
Hi, i have problem with saving the pinches on the side strips of Peugeot 308, do you know something that can help me, im from EU?
Лъв Стратег sorry I haven’t worked on them, we don’t have Peugeot here in USA.
Good work! How much does it cost to cut such glass?
avagelos anywhere between $200-300 for a removal and reinstall.
@@AlfredosAutoGlassRepairCorona Thank you! Good luck!
U removed the window bcs u thought it was leaking from the back window....😂 but it wasnt .... ram pick up always leaks water from the third brake light ..comun problem with those trucks
メキツコ人です we never stop learning 😉new things! That’s what makes our trade interesting.
@@AlfredosAutoGlassRepairCorona ua-cam.com/video/wg9OTQd5Hyk/v-deo.html
ua-cam.com/video/wg9OTQd5Hyk/v-deo.html
Omg