Samsung Galaxy Z Fold 6 Unboxing & UAG Plyo Case Review

Поділитися
Вставка
  • Опубліковано 20 гру 2024

КОМЕНТАРІ • 31

  • @andrewriley3483
    @andrewriley3483 5 місяців тому +6

    Stop buying the same phones series every year and like me upgrading for the Z3 to the Z6 the upgrade makes sense! Looking forward to your full review.

    • @tafb94force29
      @tafb94force29 5 місяців тому +1

      Yes. Not sure if he's trolling. Also it's a compliment to be compared to a trillion dollar company. UA-cam tech channels are going to have to get their year over year phone thrills from China. Just a thought.

    • @myproject13ttt
      @myproject13ttt  5 місяців тому +2

      @@tafb94force29 I made a video about skipping a couple years, before upgrading, the video itself was intended for the, average consumer.
      As a UA-camr, I bring in smartphones for the channel, intrigue, hobby and to share the information with all of you. Hopefully it helps the viewer make a decision, on whether to upgrade or not?

    • @tafb94force29
      @tafb94force29 5 місяців тому

      @@myproject13ttt I will check it out. Thanks

    • @powgee22
      @powgee22 5 місяців тому

      Pakielam mo

  • @lilzuplada1564
    @lilzuplada1564 5 місяців тому +2

    I hope they make this slightly thinner and shorter as well as cheaper for the Z Fold 7 with minimum 512gb storage. Bring back SD card, replace glass back with carbon fiber or kevlar. Anything but glass

    • @tafb94force29
      @tafb94force29 5 місяців тому

      Yeah none of that is going to happen I am afraid.

  • @opalthebest
    @opalthebest 3 місяці тому +1

    Are the corners on this case just as sharp as the phone? I am looking for a more rounded case 🤔

    • @myproject13ttt
      @myproject13ttt  3 місяці тому +1

      @@opalthebest they are a little sharp. If those those corners were rounded it wouldn't look right on the phone itself so I understand why they had to design it that way.
      In my opinion, it would have been better to use TPU for the corners instead of polycarbonate material

  • @Atljeepboy
    @Atljeepboy 5 місяців тому +1

    My old case was UAG and loved it, but for the Z Fold 6 the Civilian case is OK but the hinge is not fully covered so I'm passing them by this time

  • @DriftSpeedPH
    @DriftSpeedPH 4 місяці тому +2

    good case but lifts tempered glass even the uag branded ones

  • @angelsales8544
    @angelsales8544 5 місяців тому +1

    So does the case actually close flat this time? Last year, many complained that it didnt close. So im wondering about that. I bought a Torras case, but I was eyeing the UAG since i like their cases better. But i do want the phone to close flat. So what is your opinion so far with the case?

    • @myproject13ttt
      @myproject13ttt  5 місяців тому +1

      @@angelsales8544 laying down to go to sleep, I'm not using that case right now because, I'm a reviewing a lot of different cases.
      Just to make sure I give you the correct answer, I'll put it on in the morning and give you some feedback.
      But if I remember correctly I don't remember having any issues, with closing properly.

    • @angelsales8544
      @angelsales8544 5 місяців тому

      @@myproject13ttt ok, thank you!

  • @AngryTomTom
    @AngryTomTom 4 місяці тому

    No cushion

  • @rhettoracle9679
    @rhettoracle9679 5 місяців тому +1

    Until my OnePlus Open dies, I'm not buying anything else. My Z Flip 5 is adequate when I want a small form factor. Flip 6 isn't worth $470 with trade in of Flip 5 to get a higher megapixel camera. LG V60 is still my favorite rotation phone after OnePlus Open. Peace

  • @nosey500
    @nosey500 5 місяців тому +2

    I got that case and threw it out I'm annoyed I wasted money it looks great coverage is good but the raised edges on the front where you can't swipe to go back most of the time drove me absolutely crazy

    • @myproject13ttt
      @myproject13ttt  5 місяців тому +1

      @@nosey500 The case itself, is great! It's not the fault, it's the fact that Samsung wasn't risky enough, to design the display a bit wider.
      We all want that extra lip for protection but it does no good, when you don't have a display, that's wide enough to compliment, the extra lip on a case like the UAG plyo.

    • @ThaexakaMavro
      @ThaexakaMavro 5 місяців тому

      @@myproject13ttt how wide the phone is has nothing to do with how raised the case is . smh 🤦‍♂🤦‍♂

    • @myproject13ttt
      @myproject13ttt  5 місяців тому

      @@ThaexakaMavro I respect your opinion, but it actually does, through my experience.
      When you have more real estate to work with, it makes it much easier, with a case that has a lot of lip, in comparison to not having the distance, to work with.
      I test out a lot of cases and right now, using the Supcase Pro Mag vs the UAG Plyo ( which is a Great Case by the way👍) it's much easier using the cover display with the Supcase Pro Mag.

    • @chee6762
      @chee6762 4 місяці тому

      Why not change the front half for a different clear one with smaller edges?

    • @steves7458
      @steves7458 4 місяці тому +1

      @@myproject13ttt I respect your opinion. But its not the screen size its the case. All Uag had to do is lower a small section above the buttons and the opposite side then swiping would be fine. Just tells me the engineers did not do there homework. Just because you want a larger outside screen does not mean we all do. Reviewers always think its there way only. I love the size and ratio.

  • @jtec99
    @jtec99 5 місяців тому +1

    OnePlus ftw. Send it back

    • @JACCO20082012
      @JACCO20082012 5 місяців тому +1

      Have fun answering to the CCP.

    • @jtec99
      @jtec99 5 місяців тому

      @@JACCO20082012 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣. As if the most popular phone in the US isn't a Chinese made iPhone.

    • @KINGDINGALICIOUS
      @KINGDINGALICIOUS 4 місяці тому

      Until you get it wet😂😂

    • @jtec99
      @jtec99 4 місяці тому

      @@KINGDINGALICIOUS that's what she said