RF Coordination with Touchstone Pro & Shure Wireless Workbench 6
Вставка
- Опубліковано 27 лис 2017
- Blog Post: dbbaudio.com/2017/rf-coordinat... With all of the 600MHz changes, I have been doing a lot of RF Coordination over the last few months. So I wanted to make a quick video on how I approach it using the RF Explorer, Touchstone Pro, and Shure Wireless Workbench 6.
![3 Common Antenna Placement Mistakes and How to Fix Them [Infographic] (updated)](http://i.ytimg.com/vi/9crIn--Jttk/mqdefault.jpg)
Honestly had to watch this in parts and just take the first steps in trying rf coordination at our church's new location and I appreciate the format and detail of this video so much! God bless you!
Hey Drew. Thanks for the video, i've been starting iwith my first gigs in RF world, doing some coordinations and this video was very useful and very well explained. Best Regards from Argetina.
Thanks Drew! So helpful
dude thank you!! I have a freq coordination gig tomorrow and this video rocks!
Hi Drew. this tutorial Rocks!
Very valuable tutorial. Thanks
would be nice to have an updated video on this process!
Behringer X32 - Advance Mixing - Building A Mix... Could u do a video on this.. Love all of your videos
Great video Drew!
Which model of RF Explorer would you advice me to buy?
Hey Drew! Great video by the way. Quick question everyone, I just purchased Touchstone Pro and plugged the Rf Explorer into my laptop but the start button is greyed out? Does anyone know how to fix this issue? Or am I doing something wrong? When I first started the application, it all worked fine! Thanks guys
Hi i love all of your videos.. Can u doing a mixing video with the band ... i will love to see that... Thank u Have a wonderful day.. May God Bless and Keep u Safe
Great video! Did you buy a Sennheiser antenna combiner instead of using your custom approach?
Drew can you do a video on feedback destroyer from wiring to programming?
Hello,
Thank you for your video?
How you contact Rf explorer to Anntena Combiner? and Why you do that?
Great video! The only thing i'm confused on is how you connected the RF explorer to the antenna combiner to run that as a scan. I would love to hear back from you on this one.
You'll want to purchase a SMA to BNC adapter and then you can use the BNC cable to connect into the combiner.
What type of SDR Dongle will work with free SDR software to make csv to import scan into workbench?
The free software works well, but may not have all the features used here.
As of Nov 2019, folks are finding that WWB is not up to date with the repack changes.
Hey Drew, have you worked with Clear Waves at all? I'm debating whether to go with that or Touchstone Pro (or both), and wasn't entirely sure of the differences.
Hello Drew, I'm very interested in fixing the feedback we're having with our wireless microphones using the Behringer X32. I'm new to this console and just getting to get into the logistic of this console. Just finish watching this it's seems like there were a lot of procedure to get the frequency done right by the steps you were showing. Anyway, you mention at the end of this video about wanting to learn more about getting a clearer frequency from your mics. You mention World Gain, or World Game, I'm not sure which one or I'm I saying it right or not. Could you send me a link to find what you're talking about? Look on UA-cam, and couldn't find what I'm looking for. Could use your help.
Why I'm here? Here's the problem. As I mention we have the Behringer X32, and we're having problems with the wireless mics when a singer is singing or talking the mics goes in and out while they are performing in front of our congregation. this also, happens if they move to different areas and while the pastor is preaching a sermon. A tech told my pastor that we need to move the transistors to the mics that have two antenna up higher in the booth we have. After watching this video about wireless mics and how to get a clear signal without interference would help to understand the problems we're having and how to fix it. But I could use some more help in this area. Hope to hear from you ASAP. Thank you
Great Stuff Drew
Have bought the RF Explorer and about to buy Touchstone Pro.
A question on the scan: Do I need to keep a spacing buffer before my first frequency and after my last frequency before I run the scan?
For my example, I'm running a bunch of mics whose bandwidth starts from 518 and goes up to 596 MHz.
I always add a buffer zone, can't hurt and lets me know if something is just outside my mic range that could cause issues.
What is website you mentioned to find out when tv channels will be coming on ?
Excellent info! I have two questions.... ;-)
I use Sennheiser gear but find Shure Wireless Workbench 6.0 easier to use than Sennheiser WSM.
Do you know of a way to use a Sennheiser EW300 receiver as the scanner for Wireless Workbench 6.0? (I don't have Shure products)
If not, what kind of mobile scanner are you using? (I would prefer cheaper brands)
Best regards...
how do you import a WWB .csv into sennheiser WSM to then get that to upload into networked units?
it seems that touchstone is not more available, what app for android is available to be used with rf explorer?
is there any other possibility to get an overvieuw of the frequencies in the building than to use a spectrum analyser ?because those things are expensive man. can you messure the spectrum with your laptop ? or is their an other way ?
You can use any receiver to scan whatever bandwidth the device allows. Exporting that data into WWB6 varies with devices.
ive got a problem connecting the rf explorer to touchstone.. im on parrallels on an m1 mac.... usb says its connected.. touchstone says its not... any ideas?
How are you plugging the RF Explorer into the wireless systems?
What was the benefit of using the rf explorer and touchstone instead of scanning with workbench software ?
A much larger range, if you are scanning in workbench, you are limited to the range of that receiver.
Hi Drew, I'm finding that I have a bit of a mix bag of products to work with there. Wireless workbench doesn't have the Sennheiser G4 stuff in the their inventory. trying to coordinate the G4 mics with PSM300 IEMS's. any tips?
You should be able to use the Sennheiser G3 settings, just make sure the band is right. G3 and G4 use the same freqs. and modulation.
Proclaim AV using the AW band.
Character In the video It's great, I like it a lot $$
Why not deploy via the network?
Drew, providentially the zip code you typed into WWB is my own (85032). I'm having trouble importing RF Explorer .csv files into WWB. Can you refer a tutorial that explains step-by-step how to save a RF Explorer .csv file so that it is accepted into WWB?
Are you setting it to the Wireless Work Bench format when exporting? Be default, Touchstone Pro exports as a Professional Wireless IAS csv, so make sure that you change that to Shure wireless workbench csv before saving. Hopefully that helps!
I drive long distances to cover conferences and the mic stands get pretty beat up so I'm looking for the world's sturdiest mic stands, Anyone know?
DarkStarAZ go with Atlas mic stands for sure!
Atlas is great, check out Tama mic stands as well.
I don’t know how to use my RF explorer
What did you call it at 25:00? Wardgame? Worgain?
I believe drew is referring to "war-gaming transmitters."
Milton Richards Thank you
Wow that's a lot of tech to promote bronze age superstition!