How to test spark plugs using a multimeter

#spark_plug #spark_plug_test #multimeter
How to test spark plugs using a multimeter
Disclaimer: The ABJ Garage is not affiliated with the businesses whose products are shown in this video. Any trademarks depicted are the property of their respective owners.
Dear viewers, if you own the copyright to any video posted on the channel, and you are against placing your videos on the list, and if you do not want to see your video in the compilation please write us in the comment section below or use the following email address:
[e-mail]
****************************************************************
DISCLAIMER:
Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing."

[@MarkHarders-ss4zk]

Tks for the spark test info, makes it understandable!

[@TheAbJGarage]

Glad it was helpful!

[@المهندسعباسالغراوي]

The normal value about 3-7.5 kohm for ngk type with resistance..

[@musrathpathan4564]

Very well explained Thanks.

[@TheAbJGarage]

Glad it was helpful!

[@sintetagmenes]

Good Evening . Thank you very much for this video. I want to ask you this: all spark plugs - no matter what brand or if they are NGK all types NGK new ones when the readings show the same ohmic resistance? E.G. the NGK (BKR6EQU), (6002) new how much should it read? New I had not measured it but at 54,000 kilometers when I changed them and measured them they show (4.16) k.
Regarding all this, what is your opinion?
Thank you .

[@Sroor2023]

If all what i have irradium showing 1.3 to1.4 k ohm will it at least start the car ?

[@chezgarage]

Good content. Keep it up!!

[@ayalewdesalegn]

Verry empurtants

[@TheAbJGarage]

Thank you very much!

[@brunY741]

Very usefull thanks

[@TheAbJGarage]

So nice of you!

[@JarvisRobinson-vm2pd]

😢⁷​@@TheAbJGarage

[@carlosahoyosg]

All info on Resistance SEEMS to be between 3 and 7.5 kilo ohms. You said it is between 4 and 14 kilo ohms. Would you be so kind and explain to us which one should we take as a reference? I managed to contact NGK Brasil because I bought one plug that is 9.3 kilo ohms and I was wondering if that was too high. They said it has to be between 3 and 7.5 and that there is probably something wrong w/the spark plug. Whats your opinion? Since you said 14 kilo ohms is fine Is it ok or is too high?

[@TheAbJGarage]

www.crsautomotive.com/spark-plugs-all-you-never-knew/

[@TheAbJGarage]

As you said there are many different resistance values recommended by different manufacturers. There are champion spark plugs with 9k ohms resistance specifications. It all depends on the make and model!

[@godfreyssemagobwe4284]

Thanks so much Mr

[@TheAbJGarage]

You are very welcome

[@ephremressom450]

Thank you very much go Head

[@TheAbJGarage]

You're most welcome

[@pragasamsupiahs8419]

TQvm for the Video.😊

[@TheAbJGarage]

You're welcome !

[@mrlyricsneo]

spark with no resetor how much it should be reading ohms ?

[@05tb]

Hello, I'm here to check the spark plug resistance.

[@TheAbJGarage]

Great!!

[@acherramodikwe388]

Thanks and God bless you

[@TheAbJGarage]

Thank you too

[@dawoodk103]

Habashi, good video.

[@olusegunolusoga7989]

Is spark plug with 3.48 kilo ohms good or bad to use on 1.4 gti engine

[@TheAbJGarage]

Depends on the model of the spark plug! Generally speaking the value you mentioned is good! The more the resistance, the less the interference!

[@KemRinget-cw4vg]

My car uses no Resistance plug, i put the settings to 20k♎, and they all read 0 including the new ones.. i dont understand.. 😢

[@TheAbJGarage]

If it reads zero on 20K range, then gradually reduce the range on your ohmmeter to find the correct reading!

[@josphatmoyo]

So which one is recommended the one with a resistor or the one without resistor?

[@TheAbJGarage]

A spark plug with a resistor reduces electromagnetic interference (EMI) that can cause radio and TV interference, engine misfires, and other electronic malfunctions. The resistor reduces the amount of electrical noise that is generated by the ignition system.
On the other hand, a spark plug without a resistor is designed to provide a stronger spark and better performance. These plugs are often used in racing applications where maximum performance is desired.
A spark plug with a resistor is better for everyday driving and reducing EMI, while a spark plug without a resistor is better for high-performance applications.

[@nileshsonar9]

I have one with 0 ohm And another 4.9k ohm which is better

[@CosmosFillemon]

One with 4kohm is better, because they said it must bt testing 3-7 kohms

[@jamesortega8681]

my car specs is 5ohms, is it bad if the test shows 3.6 ohms

[@TheAbJGarage]

Not much

[@Ajnad59]

Thank u

[@fredadabecker4782]

Anderson Mark Brown Elizabeth Martinez Robert

[@julianlangdon3456]

Zero resistance for my non-resistor plug.... and zero resistance for a brand new replacement. There's a mistake here (NGK BP6ES for 2 Stroke 240V Generator)

[@TheAbJGarage]

Those spark plugs usually have 1K Ohm resistance when brand new!

[@j.a.mcbean.4043]

I do not find one spark plugs that have continuity

[@ianwilliams4787]

I got no readings whatsoever 🤔
Engine does run..

[@TheAbJGarage]

Did you put the ohmmeter in the maximum range?

[@mototraining265]

Eres la polla en vinagre good content 👍

[@perennis8889]

It looks like there was no continuity on the 2nd spark plug which indicates it's a bad spark plug

[@zcam1969]

speak English ,PLEASE

[@TheAbJGarage]

Ok dear!

[@zcam1969]

@@TheAbJGarage ?