I 3D Printed the Most Expensive Stl's for Warhammer 40k
Вставка
- Опубліковано 15 лют 2023
- I used the Phrozen Sonic Mighty 4k to 3d print the worlds most expensive stl files for warhammer 40k. Usually 3d printing warhammer is cheaper than buying from games workshop, but after no new releases for tyranids in years I decided to put my money where my mouth is and 3d print better ones.
Link to Phrozen Sonic Mighty 4k - phrozen3d.net/7gXlo
Join this channel to get access to perks:
/ @battlebrothersam
If you want to support the channel further please pledge to my patreon.
/ battlebrothersam
Amazon Affiliate Links to stuff i use(As an Amazon Associate I earn from qualifying purchases you do after following this link - at no extra cost to you):
Printers / Wash Cure
Elegoo Mars 2 Pro: amzn.to/3Te6V8r
Elegoo Saturn: amzn.to/3CtiVgH
Elegoo Mecury X Wash Cure: amzn.to/3PFqdkk
Resin
Elegoo ABS Like: amzn.to/3AJQwSg
Elegoo Standard: amzn.to/3QOW03w
Anycubic Standard: amzn.to/3QL7GEp
Siraya Tech Fast: amzn.to/3Acn4CE
Siraya Tech Tenacious: amzn.to/3Ajufcz
Nfep
Elegoo Fep2.0 Mars: amzn.to/3QNfWUB
Elegoo Fep2.0 Saturn: amzn.to/3CtfrKP
Airbrush Kit (The kit I use)
Fengda Kit: amzn.to/3Tdsar5
Follow me on Twitch - / battlebrothersamyt
This video was inspired from channels like Midwinter Minis, Goobertown Hobbies, WintersSeo, Say Hi Paul, Squidmar Miniatures, Miniac Painting, Black Magic Craft, Real Terrain Hobbies and Geek gaming scenics.
If you want to support the channel further please pledge to my patreon.
www.patreon.com/battlebrothersam
Can you print out proxy Necrons soon?
Definitely worth the money for so many combinations of bits, looking forward to the Custodes episode, I recently grabbed a Telemon, not that surrogate miniatures one you did but one of the small Cults 3D creators designs; the middle section of his proxy just looks a bit fuller by comparison got a tiny bit of my 3D printed Telemon painted up while watching this infact..... But you need longer videos dude so I can get more done while watching them. ;)
So where can I find the creator of those models?
Telegram or bust!!! 😁😉
There is something about Nids that makes players and sculptors so passionate. Of all the stls I've seen, it's clear that the nids have the most time, effort, and love put into them. They make so many official sculpts look like a joke!
These blow gw sculpts out the water! Nids have possibly the best looking stl models right now
i think its because a lot of the tyranid sculpts are so old, and with how advanced gws models are getting the tyranids see the least number of resculpts and new models.
@@battlebrothersam whom is the creator please i want to buy their collection
Butov makes amazing sculpts, I immediately fell in love with his tyrand and Swarmlord.
BTW I do print my bases, but only FDM prints for the basic, undecorated ones. There are so many amazing things to use for basing, so fully decorated bases can be more of an annoyance than a benefit
Dude thank you for your comment I was scouring this dude video replaying it trying to to find when he name drops the person who makes the files beating around the bush and everything
Awesome !
And man, you leveled up your camerawork game, beautiful stuff.
Can't wait to see what you work on next :D
Thanks brother!! :D
I had two of those Carnifex models commissioned by a printer at a larger size. I love them!
Very cool! i might end up printing all the variants of them and just embracing the hivemind
@@battlebrothersam do it. Biomass is delicious
i print bases when I am too impatient to wait for amazon or eBay to send me a 100-pack of bases. Im working on a WHFB Empire army so I go through 100 bases like nobody's business. Not to mention the prices on some larger bases is a tad crazy sometimes. I've seen 5-6 dollars for 100x50mm square bases when I could print double that amount for the exact cost in resin. Scenic bases are also nice and give me a nice pallet cleanser when painting models
thats 2 in a row for printing bases, any recommendations for scenic bases?
if you want something sturdier than resin but still perfectly usable and cheaper than official bases; you can order wooden shapes cut to the sizes you need too, i know a fair few ppl who do this esp for whfb/rank and file games ^^
also after watching the vid i'll comment on my experience 3d printing too; ive got a really cheap resin printer (anycubic photon mono) and i've always had thin, flat models warp for myself, might be my supports but ive never had any luck with printing pases in resin, found it more reliable to print them using fdm when I still had a fdm printer ^^
i print bases as well all the time ive got 2 fdm i use for terrain and bases can print 30 x 32mm bases 50 x 25mm 40x28mm and about 16x50mm base for only about $5 of filament at most took me a day to print 20 new 50mm bases for my guards heavy wep teams
For anyone wondering, I think the price is fine for ALL the attachments, weapons and wings you get with the files. Also, you can print them as much as you want 😉
Big news: he drops horms and terms next week!
Who is th creator?
oh shit that's great
@@r4pid IO_Butov on Cults3D
Yeah and i mean the more you print the more the price of the file/model decreases.
Can you mention the stl creator? Since the youtuber doesn't bother to put a link or even an name into their video description...😮💨
I've been watching less youtube lately and haven't seen your videos in a while, but I gotta say, you've gone all out on the proper "youtuber" setup and it looks great! The lit up background, the orbiting camera, and the camera quality are all unreal.
Great video too! Really nice to check out some of the more expensive STLs and how modelers are really upping their game.
Thanks brother!
Love your vids. I'm researching for my foray into the world of 3D printing and i saw these files a couple of days back. The prints are insane! I was obliged to sell all my FW 'Nids last year, so these are more than fantastic replacements. Look forward to your next vid mate.
Iunno about it being more than GW. You now own the stls so you can print those models out anytime you want. The more you print, the more the cost actually goes down.
Great video as always man! Thank you for being so cool and chill!
Simple rule of thumb for myself but if the STL file is within 10$ of the retailer model I just buy the model. If the STL file alone is going for the price of a physical model I feel almost obligated to print several just to get my money's worth. Let alone time, effort and headache.
@@Grooviebones and who tf needs two hierodules
@@agollumcalledgandalf To be fair there are two variants so if you want both the barbed and scythed then you'd need at least two
@@danielcharles93 just magnetise them
Holy Crap, I use the exact same Printer and I have been eyeballing those exact same files!! I feel like this video was made for me!! Thank you!!
What site are they being sold on. Sam didnt link the place to purchase them...
@@darkscorpion6534 he hints at it with the screenshots of the prices.
Love the recognizably and Ultralisk randomly in the middle. 🤣
Patiently waiting for my replacement display for my Jupiter and may need to pick these up! Thanks for taking the chance on these and showing us the results, awesome stuff, awesome channel!
Those are some pretty nice prints, very nicely painted.
Thanks for the heads up, will keep an eye out for that sale!
Looking great there my good man! I love the use of speed paints for such large models.
I just printed out some of the files you recommended recently. I must say I was blown away! Will be getting more.
Got a printer last year. And recently began printing bases for my stuff. As basing is by far the most tedious process for me being able to just print an already dynamic base and just slap the model on is a breath of fresh air.
Brother they are epic but the price ouch, they do blow GW's out the water. The paint job looks great easy clean love it. cant wait to see the whole army.
Sorry i didnt make the paint along i dropped my warhound after undercoating it put me in a mood for the rest of the night lmao
The price is... Ouch for sure lol brother the paint job was that easy I'm now going to do a full army lol ah I don't blame you I'd be in a mood for a week
Thank you for your insight into 3D printing and now waiting to get my resin printer next week
Looks great man and the camera work and production have definitely improved really nice work mate
Name it “Tiny Tim”. And fyi, I just got my first resin printer a week ago and it was your vids that gave me the confidence to tip my toe in the new hobby, and I’m loving it. So, thanks man.
Been watching your channel for about a week now, your thunderhawk vid got me hooked as I was wanting to get into printing for displays and like you, the hawk was a childhood wish that was just way out of reach, but these nids are insane! Defo gonna get on that patreon soon for some advice! Keep up the good work
Blood Angels have already fought nids. I’m hoping the new box will have a different chapter fighting against the nids
I was just looking at this sculpt and wondering wether to buy. Now I will ❤
I just noticed 10k subs haha grats bro...
This is why I sell printed copies of them to cover the costs of stls
Im so glad you are boosting this creator signal this person does quality work and Ive purchased and downloaded all of the files they have made.
I'd like to purchase some as well but have no idea where to find the seller...
love the content man, keep it up
I design and print my own bases. I like the cause I can print completed bases which saves me times. I also play Aeldari (Drukhari Harliquins with a splash of craftworld Eldar) and custom bases allow me to print magnet slots right into the base. The heavier bases also prevent models from tipping over and breaking all the fiddly bits.
My Drukhari are on bases covered in skulls, I couldn't imagine placing them all by hand.
I am currently in the process of making flying stand with 3d printed adaptors to make the models hold on with magnets.
Those look fantastic! Great job.
Regarding the base printing question; I print my bases in my FDM printer, at 0.08mm layer height. It gives me nice quality bases that cost absolutely nothing. Plus, it allows me to customize them if I want to add slots for different magnets (I have an option for three 2x1mm magnets, one for a single 9mm or 12mm, etc).
Also, amazing result on those not-so-minis! I really want to print some big models, once I set my mind on a specific faction to print a bigger army.
When you showed the different heads at 1:47, I got the sudden urge to make a plaque for them, scale them up, print them, and mount them on my wall like a hunting trophy
Okay so roughly 115 something bucks for three models of that size, honestly I would have to say that's actually very well worth it. $11 worth of resin when a bottle can cost you anywhere from 25 upwards to $100 again I would say very worth it. And if you put magnets in the heads and on the limbs for the two smaller ones you can interchange parts on them depending on who you're going to be fighting against or putting them on display
did I miss the custodes video or is it not out yet?
Niceee, another vid from the legend. Will watch when I get some time free
When you factor in that buy 1 model premade and having access to the file and being able to print unlimited prints makes the file purchase a great idea
Loving your stuff buddy, really giving me the itch to get into printing!
Thanks brother!
Keep up the good work Sam! Currently printing a mini for each legion of the original marines in 40k be cool to see a similar print and paint from you.
Hey buddy nice video, i got the files myself, and was wondering, did you scale it bigger or is it the right size as it comes ?
Amazing! I've had my eyes on these STLs for so long... I just can't bring myself to pick them up. Hopefully the sale will be big enough to reach the tipping point.
How do you do your oil wash? I see the oil paint but is that water, turpentine?? That you mix it with? Thanks!
Seeing them even better close up in this Vid, makes them look even better holy moly. Guess i have to print some Nids too😩
Yes alot better quality than the webcam for the hangouts lol
You and me both!
This video was made for you @S1lentJo
ua-cam.com/video/L8TibbgVSpo/v-deo.html
Thats incrédible ! Such amazing models
beautiful sculpts for sure
A model i think they should update aswel is the Skinks...
Their model is over 21 years old at this point
hey sam, love the vid, ive started on my warlord titan and its huge ive just got the legs done and its already about a foot tall, only used 2kg of resin so for so not that bad, cant wait for you to do one !!
most of the armies have better STL's out there than GW. It is kind of funny because GW even used some of the 3D prints in White Dwarf.
Where can i go to get these stl file
Wow! Amazing job! Continue with Tyranids)
love your videos! may I ask you what layer height you printed your models?
love your content!
I use my FDM Printer for bases. This saves me time so I dont need to build everything from scratch and they are rough enough that I still want to dump basing material on them.
Where can I find these files? I'd like to try them out and paint them as well as I can.
by far these are the best 3d print files. absolutely justifying the price point
incredible job man. what's your favourite resin or most use resin . keep up the great videos!
I FDM print the actual base part and resin print bits that fit the army that I'm working on at the time. I feel this is the most cost effective way to do things. I print to need. Generally, I tend to be happier with what I come up than what is available online.
Had my eye on these sculpts for a while but just a tad too expensive. Discount sounds interesting, thanks for the video!
Hopefully the discount is good or someone shows him this video so he can give a code lol
Im intersested in what you use for a spray booth station? Did you build that yourself or is that a kit you bought or something?
A heads up to anyone watching this around April 26, the creator of these proxies has them on sale for the next week to celebrate Xenomorph day.
3d printed bases can look amazing and just add so much to the model
ok, i've been meaning to get their ultralisk carnifex for some time, but didn't want to pull the trigger. come to find out they've got a MAJOR discount on it from yesterday on through the next few days. Now is the time to grab anything you're looking for here.
Hey Sam, I use an FDM printer to print my bases. They are done in about 4-6 hours and cost pennies
Ah that's a smart use of the fdm printer
How much do i have to pay you to get one of these models 3d printed
These are awesome! Have you ever played/painted/printed epic 6mm?
I found the sculpts 3 weeks ago and have been patiently waiting for April.
I have the hive tyrant and hyrodule files and the quality even on my elegoo mars 2 pro is immense. Got them both on a sale and don't regret it in the slightest
What site do you buy these STLs from?
What's that ultralisk stl called? It looks amazing
Question on the scale, doesn't it make the line of sight rules harder? Because technically it would be easier to see/harder to hide behind things. Or are there rulings for kitbashed/custom models to not abuse creative choices for the gameplay?
Print my bases for 2 reasons
1.don’t have any on hand
2.they look way better than anything I could make with my current skills
I might just start doing them I'm the same
I bought the Tyranid Warrior STL files from this guy last year. It stung at first, but I can have as many Tyranid Warriors as I want now rather than only 3 from GW. They look amazing.
Would you mind telling me how I could my hands on them too? Thanks brother.
Some of those arts look big, do you ever drill and pin?
Sam what settings do your printers have because i have a mars 3 pro and it takes about 15 hours to print votann whereas on your video it only took about 3 in your video?
I use 0.05 layer height 40mm lift 8.5sec lift off 3 sec exposure, YMMV
Thank you
Sam, would you recommend any settings for a Mars 2 Pro with Elegoo Water wash resin?
"Creamy bone tickled my pickle"
kinky
I print bases to avoid having a stockpile of any bases I need, its also much easier to get sculpted bases through printing
now that you say it I have a drawer filled with random bases
@@battlebrothersam lol if only
my man has a mission and I fully support him
with 3d printed bases it's super easy to have ones with slots specifically for magnets so you just drop a dab of glue and slot the magnet in and boom, magnetized base
whats the site to buying the models?
I print bases because I mostly print One page rules models and they include awesome themed bases that turn out great. That said, another channel had me considering using clear bases.
Is there a link to the files anywhere?
Looking for the Hierodule file link if anyone can drop me a hint.
Funny I just got this video on my feed and today is April 22nd! Unfortunately no discount lol. FYI: still worth the regular price
I print all my bases on my fdm printer in black filament. Just a basic blank base. At with a .6 nozzle at .2 layer height it comes out to one 32mm scale base in about 3.5 minutes. So you can do a full bed of them in a handful of hours basically when ever I have some down time I’m printing bases so I have a decent stock.
Parasite of Mortrex is peak Tyranid design for me. Organic and deadly, bestial but hyper-advanced. Neat 😎
I don't see a link for the models?
I bought all the same files, totally worth it, especially since you can print as many you want
I only print bases if I need a lot of them and or I found something that looks good, but even than I'll only print them if I've got space while printing something else.
So where do I find this creature
Where can I buy these stl files?
If one is named "Miley", the other one is clearly "Hannah"
I also saw theme like 3 weeks ago and they looked fantastic, worth it.
Great video, and amazing figures. I would love to see your grime technique in action it looks very good. Too bad te creator does not have a Patreon or My Mini Factory page.
where can i find the render of the minute 0:23
Compared to GW who asks for 100-500$ per model, paying that same amount for a STL that lets you print that same model, as many times as you want for a fraction, is a pretty fair price imo.
GW needs to hire this sculpter asap! Best looking nids ever
where did you get the stls?
keep it up sam i love your videos.
Do you have to use a resin printer for this kindof stuff? Isnt that stuff toxic?
Absolutely a better day when i see you posted a video!
Haha thanks brother glad to hear it!
@@battlebrothersam - i absolutely dig the 3D print warhammer oriented focus of your channel. Please keep posting on this. Keep an eye on custom models as well!
where did you get these stls?
I see new Custodes on your desk… can’t wait heheh.
you see nothing brother... its an illusion lol