How To Make Turned Door Stops
Вставка
- Опубліковано 26 сер 2024
- A set of turned doorstops. They are glued up from a few cherry and walnut leftovers.
I turn them on the lathe and cut them up at the band saw. I've tested them out. They do in fact stop doors...
another lovely functional project :) Thanks Peter!
Goodness, what beautiful earrings! You, sir, are an artist!
They came out larger than I was at first expecting. I really like that. It would be perfect for the back door of my home which never stays open on its own. Currently a large rock is used.
This seems like a good project to do as a gift for a wood working teacher at a school
Watched for the Epoxy video. Subscribed for the woodworking. Great job, Peter.
"Turn"ed out good.
Next round, try offsetting the wood, so it runs at an angle. That puts the handles at more of an angle [up]. You get some nice effects. Test drive it with a 2x6 scrap first. You can also pre-cut the rough shape, which will, greatly, reduce the vibration.
I don't make this stuff, I just find it interesting to watch! Lol
Me too 😂😂😂
Those would make cool scoops if the were hollowed.
I like how when you speed up part of the video, you don't speed up the audio. It's a weird, but really cool effect!
At :44 - such skilled glue handling
John Uhl Ha! It's like a slip and slide....
Another very cool project. I think I may have to try this one myself. Thanks for all your videos man.
Thank you for watching Anthony!
Mine are really big, which I was going for, but just know that is if you're not into that Potter Barn look...
kludge1977
The turned handles really set the piece off. I have another question for you man. I live in Sonoma County so I am dying to know where to get those gun stock cut offs? Can you help a Wine Country brother out, LOL?
kludge1977
Yes, I live in Santa Rosa.
sent you a UA-cam message!
kludge1977
Got it, thanks man. Let me know if you are ever interested in using some oak on a project. I may be able to hook you up.
it has probably already been done, but if not, a project with the wood shavings would be cool!!!
Maybe a bracelet?
When it was on the lathe it looked like a fancy stair banister.
These would be great to hodars with ;D
Lol you didn't close the lid on the bottle! 😂😂😂😂 yeah the things that catch my attention lol
Sorry to laugh at your misfortune, but when you were sanding then got your finger and said "don't do that" it made me chuckle but then I really lost it when you did it a second time and said the second time wasn't any better then the first. Been there, done that. Have a good one.
I was honestly surprised by it, it totally stung!
Thanks for watching!
COOL!
Thanks!
Great, I've sold tons in the past!
"eeeaaaahhh dont do that, dosnt feel very good" hahaha made me laugh, nice video well done :D
Sblingin like a boss Thanks! It really did hurt...
Yeah i did look painful, i hope your ok :D
I like the home made friction polish. What's your ratio?
1/3 Shellac 1/3 DNA 1/3 BLO... Save yourself some green!
Thanks
They are the biggest door stops/wedges I've ever seen how big is the gap between the floor and the door to need such big ones there cool but a little bit over kill.
Heavy doors/windy areas require it to keep doors open...
Man I wish I had wood shop in school as a youngin...
There's practically no way to have this sort of thing taught to you outside of the internet these days.
I say that after watching half your channel in 2 days ._.
gromann We didn't have wood shop at our school either. I'm not sure why the trades are being ignored in schools. Thanks for watching!
+Peter Brown In my school in Australia we have a large woodwork and metalwork building for years 9 and 10 elective courses. I myself am in the woodwork area and we make four projects over two years.
Peter Brown if you ask me it's so they can turn everybody into mindless zombies but APPARENTLY that's being a paranoid conspiracy theorist.
Is it a really evil-looking doorstop?
Niiiiiiiiice!!
have you ever tried a wood shavings bracelet perhaps?
Super arbeit
Danke!
if you make them with the dimensions in cm they work great. i.e. 15" to 15cm
Zero exp. with a lathe - for a corner like that I'd use a sanding sponge but not sure it would be fool proof.
+shogun21jimi Speaking as a fool, I might have still hurt myself! Good idea though!
why do you use the planes at an angle and not straight on. if you put a little table salt on glue it won't slide around
+August Wagner You get a better cut that way! I read an article a while back from a glue manufacture that this can mess with the bond. If I'm turning it at 1800RPM i want a tight bond! :)
Ouchhh that had to hurt
did the salad dressing finish smell good?
Can you make things for me!!!
Totally serious @kludge1977 if you have any free time I would pay you for some goods!
Can you please fix your audio I really like watching your vids ,the sound doesn't go with what your saying its a slit delay ,keep up the vids there great
Seriously. I'm saving up for a new camera and more RAM. I'm just a hack, but I'm trying! :)
Ok but what is with that aspect ratio
I bet that does hurt
SkytheFunKid 9000 It totally did!
Us non turners just call it salad dressing...
You definitely would NOT want to put that on your salad.
Woodglut comes with very useful plans with all the details you need.
These look a lot smaller in the thumbnail, I guess that's what happens when you have no sense of scale
Make it wooden with the help of the Stodoys instructions.